USB problem on Acer Aspire WLMi 5102 with AMD Turion 64 X2

[Paul Argentoff]

Hello, world.

It's my first experience of installing FreeBSD on a notebook and also a first 
problem with USB devices. Here's the report:


[root at paul-book /home/paul]# uname -r
6.1-RELEASE-p11
[root at paul-book /home/paul]# uname -p
i386
[root at paul-book /home/paul]# uname -s
FreeBSD

dmesg:

Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 6.1-RELEASE-p11 #1: Tue Dec 19 20:15:13 MSK 2006
    root at paul-book.rtelekom.net:/usr/src/sys/i386/compile/PAULBOOK
acpi_alloc_wakeup_handler: can't alloc wake memory
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.01-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f82  Stepping = 2
  
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow+,3DNow>
  AMD Features2=0x1f<LAHF,CMP,<b2>,<b3>,CR8>
  Cores per package: 2
real memory  = 468254720 (446 MB)
avail memory = 451375104 (430 MB)
ACPI APIC Table: <PTLTD  	 APIC  >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0 <Version 2.1> irqs 0-23 on motherboard
kbd1 at kbdmux0
acpi0: <PTLTD   RSDT> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU> on acpi0
powernow0: <PowerNow! K8> on cpu0
cpu1: <ACPI CPU> on acpi0
powernow1: <PowerNow! K8> on cpu1
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
acpi_video0: <ACPI video extension> port 0x9000-0x90ff mem 
0xd4000000-0xd7ffffff,0xd0100000-0xd010ffff irq 17 at device 5.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci4: <ACPI PCI bus> on pcib3
ohci0: <ATI SB400 USB Controller> mem 0xd0004000-0xd0004fff irq 19 at device 
19.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <ATI SB400 USB Controller> on ohci0
usb0: USB revision 1.0
uhub0: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ohci1: <ATI SB400 USB Controller> mem 0xd0005000-0xd0005fff irq 19 at device 
19.1 on pci0
ohci1: [GIANT-LOCKED]
usb1: OHCI version 1.0, legacy support
usb1: <ATI SB400 USB Controller> on ohci1
usb1: USB revision 1.0
uhub1: ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pci0: <serial bus, USB> at device 19.2 (no driver attached)
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci0: <ATI IXP400 UDMA133 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 on 
pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
pci0: <multimedia> at device 20.2 (no driver attached)
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib4
pci6: <network, ethernet> at device 1.0 (no driver attached)
pci6: <network, ethernet> at device 2.0 (no driver attached)
pci6: <bridge, PCI-CardBus> at device 4.0 (no driver attached)
pci6: <memory, flash> at device 4.1 (no driver attached)
pci6: <base peripheral> at device 4.2 (no driver attached)
pci6: <memory, flash> at device 4.3 (no driver attached)
pci6: <memory, flash> at device 4.4 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
ad0: 95396MB <HTS541010G9AT00 MBZOA60A> at ata0-master UDMA100
acd0: DVDR <PIONEER DVD-RW DVR-K16RS/1.35> at ata0-slave UDMA33
pass0 at ata0 bus 0 target 1 lun 0
pass0: <PIONEER DVD-RW DVR-K16RS 1.35> Removable CD-ROM SCSI-0 device 
pass0: 33.000MB/s transfers
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad0s4a
rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem 0xd0210000-0xd02100ff 
irq 21 at device 1.0 on pci6
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: Ethernet address: 00:16:d4:18:87:8b

usbdevs:
addr 1: OHCI root hub, ATI
addr 1: OHCI root hub, ATI
 addr 2: USB2.0 Camera, vendor 0x0402


usb part of kernel config:
# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
#device         ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)

I've commented EHCI out because if present, it gives me "addr 1: EHCI root 
hub, ATI" and the system hangs on shutdown.

In both cases (with and without ehci) the system does not react on 
inserting/removing USB devices. Who, what and how can help me out?

-- 
Yours truly, WBR, Paul Argentoff.
Jabber:	paul at jabber.rtelekom.ru
RIPE:	PA1291-RIPE