Acer Aspire AS5672 laptop and FreeBSD 7.0-current (July
snapshot)
Torfinn Ingolfsen
torfinn.ingolfsen at broadpark.no
Sat Aug 5 17:29:19 UTC 2006
Regarding this laptop (acer aspire AS5672 WLMi) and FreeBSD - somebody
mentioned in a mail that I should try to boot Linux on this, in order
to see how it copes with the broken ACPI implementation. It sounded
good to mee, so attached is the dmesg output from Ubunto 6.06 (a
LiveCD), in case it helps.
--
Regards,
Torfinn Ingolfsen,
Norway
-------------- next part --------------
[4294667.296000] Linux version 2.6.15-23-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 PREEMPT Tue May 23 13:49:40 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[4294667.296000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
[4294667.296000] BIOS-e820: 000000007fe80000 - 000000007fe99000 (ACPI data)
[4294667.296000] BIOS-e820: 000000007fe99000 - 000000007ff00000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
[4294667.296000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[4294667.296000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[4294667.296000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[4294667.296000] 1150MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f6af0
[4294667.296000] On node 0 totalpages: 523904
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 294528 pages, LIFO batch:31
[4294667.296000] DMI present.
[4294667.296000] ACPI: RSDP (v000 PTLTD ) @ 0x000f6a20
[4294667.296000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x7fe8e998
[4294667.296000] ACPI: FADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe98e20
[4294667.296000] ACPI: MADT (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe98e94
[4294667.296000] ACPI: HPET (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe98efc
[4294667.296000] ACPI: MCFG (v001 INTEL CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe98f34
[4294667.296000] ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x7fe98f70
[4294667.296000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x7fe98fd8
[4294667.296000] ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe8e9d8
[4294667.296000] ACPI: DSDT (v001 INTEL CALISTGA 0x06040000 MSFT 0x02000002) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x1008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: 2 duplicate APIC table ignored.
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 6:14 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[4294667.296000] Processor #1 6:14 APIC version 20
[4294667.296000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1 already used, trying 2
[4294667.296000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: BOOT_IMAGE=/casper/vmlinuz preseed/locale=en_GB kbd-chooser/method=gb DEBCONF_PRIORITY=critical boot=casper initrd=/casper/initrd.gz ramdisk_size=1048576 root=/dev/ram rw quiet splash --
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Console: colour VGA+ 80x25
[4294667.296000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.296000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.296000] Memory: 2067032k/2095616k available (1976k kernel code, 27352k reserved, 606k data, 288k init, 1178112k highmem)
[4294667.296000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.296000] hpet0: at MMIO 0xfed00000 (virtual 0xf8800000), IRQs 2, 8, 0
[4294667.296000] hpet0: 3 64-bit timers, 14318180 Hz
[4294667.296000] Using HPET for base-timer
[4294667.296000] Using HPET for gettimeofday
[4294667.296000] Detected 1733.563 MHz processor.
[4294667.296000] Using hpet for high-res timesource
[4294667.357000] Calibrating delay using timer specific routine.. 3470.08 BogoMIPS (lpj=1735040)
[4294667.357000] Security Framework v1.0.0 initialized
[4294667.357000] SELinux: Disabled at boot.
[4294667.357000] Mount-cache hash table entries: 512
[4294667.357000] CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[4294667.357000] CPU: After vendor identify, caps: bfe9fbff 00100000 00000000 00000000 0000c189 00000000 00000000
[4294667.357000] monitor/mwait feature present.
[4294667.357000] using mwait in idle threads.
[4294667.357000] CPU: L1 I cache: 32K, L1 D cache: 32K
[4294667.357000] CPU: L2 cache: 2048K
[4294667.357000] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00000040 0000c189 00000000 00000000
[4294667.357000] mtrr: v2.0 (20020519)
[4294667.357000] CPU: Intel Genuine Intel(R) CPU T2250 @ 1.73GHz stepping 08
[4294667.357000] Enabling fast FPU save and restore... done.
[4294667.357000] Enabling unmasked SIMD FPU exception support... done.
[4294667.357000] Checking 'hlt' instruction... OK.
[4294667.361000] checking if image is initramfs... it is
[4294667.993000] Freeing initrd memory: 6838k freed
[4294667.997000] ACPI: Looking for DSDT ... not found!
[4294668.003000] ENABLING IO-APIC IRQs
[4294668.004000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.117000] NET: Registered protocol family 16
[4294668.117000] EISA bus registered
[4294668.117000] ACPI: bus type pci registered
[4294668.117000] PCI: PCI BIOS revision 2.10 entry at 0xfd6f2, last bus=11
[4294668.117000] PCI: Using MMCONFIG
[4294668.117000] ACPI: Subsystem revision 20051216
[4294668.121000] ACPI: Interpreter enabled
[4294668.121000] ACPI: Using IOAPIC for interrupt routing
[4294668.121000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.121000] PCI: Probing PCI hardware (bus 00)
[4294668.125000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
[4294668.125000] Boot video device is 0000:01:00.0
[4294668.126000] PCI: Transparent bridge - 0000:00:1e.0
[4294668.126000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.132000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[4294668.132000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[4294668.132000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[4294668.132000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[4294668.133000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[4294668.134000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[4294668.134000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294668.134000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.135000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[4294668.135000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.135000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[4294668.135000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[4294668.136000] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[4294668.136000] ACPI: Embedded Controller [EC0] (gpe 23) interrupt mode.
[4294668.159000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.159000] pnp: PnP ACPI init
[4294668.163000] pnp: PnP ACPI: found 12 devices
[4294668.163000] PnPBIOS: Disabled by ACPI PNP
[4294668.163000] PCI: Using ACPI for IRQ routing
[4294668.163000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.163000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[4294668.163000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[4294668.163000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[4294668.163000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[4294668.164000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[4294668.164000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[4294668.164000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[4294668.164000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[4294668.164000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[4294668.164000] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.3
[4294668.164000] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.3
[4294668.164000] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.3
[4294668.196000] PCI: Bridge: 0000:00:01.0
[4294668.196000] IO window: 2000-2fff
[4294668.196000] MEM window: c8100000-c81fffff
[4294668.196000] PREFETCH window: d0000000-d7ffffff
[4294668.196000] PCI: Bridge: 0000:00:1c.0
[4294668.196000] IO window: disabled.
[4294668.196000] MEM window: disabled.
[4294668.196000] PREFETCH window: disabled.
[4294668.196000] PCI: Bridge: 0000:00:1c.1
[4294668.196000] IO window: disabled.
[4294668.196000] MEM window: 8a000000-8a0fffff
[4294668.196000] PREFETCH window: disabled.
[4294668.196000] PCI: Bridge: 0000:00:1c.2
[4294668.196000] IO window: disabled.
[4294668.196000] MEM window: 8a100000-8a1fffff
[4294668.196000] PREFETCH window: disabled.
[4294668.196000] PCI: Bridge: 0000:00:1c.3
[4294668.196000] IO window: disabled.
[4294668.196000] MEM window: disabled.
[4294668.196000] PREFETCH window: disabled.
[4294668.196000] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[4294668.196000] IO window: 00003000-000030ff
[4294668.196000] IO window: 00003400-000034ff
[4294668.196000] PREFETCH window: 88000000-89ffffff
[4294668.196000] MEM window: 8c000000-8dffffff
[4294668.196000] PCI: Bridge: 0000:00:1e.0
[4294668.196000] IO window: 3000-3fff
[4294668.196000] MEM window: c8400000-c84fffff
[4294668.196000] PREFETCH window: 88000000-89ffffff
[4294668.196000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294668.196000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.196000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[4294668.196000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.196000] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[4294668.196000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
[4294668.196000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294668.196000] PCI: Enabling device 0000:00:1c.2 (0000 -> 0002)
[4294668.196000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294668.196000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.196000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[4294668.196000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[4294668.196000] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[4294668.196000] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 201
[4294668.196000] Simple Boot Flag at 0x36 set to 0x1
[4294668.197000] audit: initializing netlink socket (disabled)
[4294668.197000] audit(1154800760.196:1): initialized
[4294668.197000] highmem bounce pool size: 64 pages
[4294668.197000] VFS: Disk quotas dquot_6.5.1
[4294668.197000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.197000] Initializing Cryptographic API
[4294668.197000] io scheduler noop registered
[4294668.197000] io scheduler anticipatory registered
[4294668.197000] io scheduler deadline registered
[4294668.197000] io scheduler cfq registered
[4294668.197000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[4294668.197000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.197000] assign_interrupt_mode Found MSI capability
[4294668.197000] Allocate Port Service[pcie00]
[4294668.197000] Allocate Port Service[pcie03]
[4294668.197000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177
[4294668.197000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[4294668.197000] assign_interrupt_mode Found MSI capability
[4294668.197000] Allocate Port Service[pcie00]
[4294668.197000] Allocate Port Service[pcie02]
[4294668.197000] Allocate Port Service[pcie03]
[4294668.197000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 169
[4294668.197000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[4294668.197000] assign_interrupt_mode Found MSI capability
[4294668.197000] Allocate Port Service[pcie00]
[4294668.197000] Allocate Port Service[pcie02]
[4294668.197000] Allocate Port Service[pcie03]
[4294668.197000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294668.197000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[4294668.197000] assign_interrupt_mode Found MSI capability
[4294668.197000] Allocate Port Service[pcie00]
[4294668.197000] Allocate Port Service[pcie02]
[4294668.197000] Allocate Port Service[pcie03]
[4294668.197000] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 193
[4294668.197000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[4294668.198000] assign_interrupt_mode Found MSI capability
[4294668.198000] Allocate Port Service[pcie00]
[4294668.198000] Allocate Port Service[pcie02]
[4294668.198000] Allocate Port Service[pcie03]
[4294668.198000] isapnp: Scanning for PnP cards...
[4294668.557000] isapnp: No Plug & Play device found
[4294668.569000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294668.570000] i8042.c: Detected active multiplexing controller, rev 1.1.
[4294668.572000] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[4294668.572000] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[4294668.572000] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[4294668.573000] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[4294668.573000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.573000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.573000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294668.575000] RAMDISK driver initialized: 16 RAM disks of 1048576K size 1024 blocksize
[4294668.575000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.575000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.575000] mice: PS/2 mouse device common for all mice
[4294668.575000] EISA: Probing bus 0 at eisa.0
[4294668.575000] Cannot allocate resource for EISA slot 1
[4294668.575000] Cannot allocate resource for EISA slot 2
[4294668.575000] Cannot allocate resource for EISA slot 3
[4294668.575000] EISA: Detected 0 cards.
[4294668.575000] NET: Registered protocol family 2
[4294668.584000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.584000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294668.585000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.585000] TCP: Hash tables configured (established 262144 bind 65536)
[4294668.585000] TCP reno registered
[4294668.585000] TCP bic registered
[4294668.585000] NET: Registered protocol family 1
[4294668.585000] NET: Registered protocol family 8
[4294668.585000] NET: Registered protocol family 20
[4294668.585000] Using IPI Shortcut mode
[4294668.585000] ACPI wakeup devices:
[4294668.585000] HDEF PXS1 LANE PXS5 PXS6 USB1 USB2 USB3 USB4 USB7 LANC CIR
[4294668.585000] ACPI: (supports S0 S3 S4 S5)
[4294668.585000] Freeing unused kernel memory: 288k freed
[4294668.630000] vga16fb: initializing
[4294668.630000] vga16fb: mapped to 0xc00a0000
[4294668.744000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.808000] Console: switching to colour frame buffer device 80x25
[4294668.808000] fb0: VGA16 VGA frame buffer device
[4294669.990000] Capability LSM initialized
[4294670.019000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294670.019000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294670.023000] ACPI: Thermal Zone [THRM] (70 C)
[4294670.503000] SCSI subsystem initialized
[4294670.504000] ACPI: bus type scsi registered
[4294670.504000] libata version 1.20 loaded.
[4294670.505000] ata_piix 0000:00:1f.2: version 1.05
[4294670.505000] ata_pci_init_one: pci_dev class+intf: 0x10180
[4294670.505000] ata_pci_init_one: NO_LEGACY == 0
[4294670.505000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 193
[4294670.505000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[4294670.506000] ata1: PATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
[4294670.676000] ata1: dev 0 cfg 00:045a 49:2f00 82:746b 83:7f09 84:6023 85:3c69 86:3f01 87:6003 88:20ff 93:0000
[4294670.676000] ata1: dev 0 ATA-7, max UDMA7, 234441648 sectors: LBA48
[4294670.676000] ata_acpi_push_id: skipping for PATA mode
[4294670.676000] ata1: dev 0 configured for UDMA/133
[4294670.676000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.676000] pata_get_dev_handle: dev_handle: 0xdfff2280, parent_handle: 0xdfffb4e0
[4294670.676000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff79800, *handle=0xdfff2280
[4294670.676000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff2d40
[4294670.677000] scsi0 : ata_piix
[4294670.677000] Vendor: ATA Model: SAMSUNG HM120JI Rev: YF10
[4294670.677000] Type: Direct-Access ANSI SCSI revision: 05
[4294670.677000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.677000] pata_get_dev_handle: dev_handle: 0xdfff2280, parent_handle: 0xdfffb4e0
[4294670.677000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff79800, *handle=0xdfff2280
[4294670.677000] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
[4294670.982000] ata2: dev 0 cfg 00:85c0 49:0f00 82:0000 83:0000 84:0000 85:0000 86:0000 87:0000 88:0407 93:4000
[4294670.982000] ata2: dev 0 ATAPI, max UDMA/33
[4294670.982000] ata2(0): applying bridge limits
[4294670.982000] ata_acpi_push_id: skipping for PATA mode
[4294670.982000] ata2: dev 0 configured for UDMA/33
[4294670.982000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.983000] pata_get_dev_handle: dev_handle: 0xdfff2280, parent_handle: 0xdfffb4e0
[4294670.983000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff79800, *handle=0xdfff2280
[4294670.983000] do_drive_get_GTF: drive w/ adr=0: v: 0xdfff2b60
[4294670.984000] scsi1 : ata_piix
[4294670.985000] Vendor: MATSHITA Model: DVD-RAM UJ-845S Rev: D201
[4294670.985000] Type: CD-ROM ANSI SCSI revision: 05
[4294670.986000] pata_get_dev_handle: ENTER: dev->bus_id='0000:00:1f.2'
[4294670.986000] pata_get_dev_handle: dev_handle: 0xdfff2280, parent_handle: 0xdfffb4e0
[4294670.986000] pata_get_dev_handle: for dev=0x1f.2, addr=0x1f0002, parent=0xdff79800, *handle=0xdfff2280
[4294670.992000] Driver 'sd' needs updating - please use bus_type methods
[4294670.997000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[4294670.997000] SCSI device sda: drive cache: write back
[4294671.000000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[4294671.000000] SCSI device sda: drive cache: write back
[4294671.000000] sda: sda1 sda2 sda3 sda4
[4294671.507000] sda3: <bsd: sda5 sda6 sda7 sda8 sda9 >
[4294671.524000] sda4: <bsd: sda10 sda11 sda12 sda13 >
[4294671.525000] sd 0:0:0:0: Attached scsi disk sda
[4294671.540000] sr0: scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda caddy
[4294671.540000] Uniform CD-ROM driver Revision: 3.20
[4294671.540000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[4294672.174000] usbcore: registered new driver usbfs
[4294672.174000] usbcore: registered new driver hub
[4294672.176000] USB Universal Host Controller Interface driver v2.3
[4294672.176000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 66
[4294672.176000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[4294672.176000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[4294672.177000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[4294672.177000] uhci_hcd 0000:00:1d.0: irq 66, io base 0x00001800
[4294672.178000] hub 1-0:1.0: USB hub found
[4294672.178000] hub 1-0:1.0: 2 ports detected
[4294672.261000] ieee1394: Initialized config rom entry `ip1394'
[4294672.279000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 193
[4294672.279000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[4294672.279000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[4294672.279000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[4294672.279000] uhci_hcd 0000:00:1d.1: irq 193, io base 0x00001820
[4294672.279000] hub 2-0:1.0: USB hub found
[4294672.279000] hub 2-0:1.0: 2 ports detected
[4294672.380000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
[4294672.380000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[4294672.380000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[4294672.380000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[4294672.380000] uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001840
[4294672.380000] hub 3-0:1.0: USB hub found
[4294672.380000] hub 3-0:1.0: 2 ports detected
[4294672.481000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 169
[4294672.481000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[4294672.481000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[4294672.481000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[4294672.481000] uhci_hcd 0000:00:1d.3: irq 169, io base 0x00001860
[4294672.481000] hub 4-0:1.0: USB hub found
[4294672.481000] hub 4-0:1.0: 2 ports detected
[4294672.584000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 66
[4294672.584000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[4294672.584000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[4294672.584000] ehci_hcd 0000:00:1d.7: debug port 1
[4294672.584000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[4294672.584000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[4294672.584000] ehci_hcd 0000:00:1d.7: irq 66, io mem 0xc8004000
[4294672.588000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294672.588000] hub 5-0:1.0: USB hub found
[4294672.588000] hub 5-0:1.0: 8 ports detected
[4294672.689000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294672.689000] ACPI: PCI Interrupt 0000:0a:09.1[A] -> GSI 20 (level, low) -> IRQ 201
[4294672.740000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[201] MMIO=[c8405000-c84057ff] Max Packet=[2048]
[4294672.770000] ide0: I/O resource 0x1F0-0x1F7 not free.
[4294672.770000] ide0: ports already in use, skipping probe
[4294672.770000] ide1: I/O resource 0x170-0x177 not free.
[4294672.770000] ide1: ports already in use, skipping probe
[4294672.921000] usb 5-8: new high speed USB device using ehci_hcd and address 2
[4294673.690000] ISO 9660 Extensions: Microsoft Joliet Level 3
[4294673.768000] ISO 9660 Extensions: RRIP_1991A
[4294673.826000] loop: loaded (max 8 devices)
[4294673.834000] Registering unionfs 1.1.2
[4294673.966000] squashfs: version 3.0prerelease (2006/1/24) Phillip Lougher
[4294673.996000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00c09f00009a84d3]
[4294698.464000] tg3.c:v3.47 (Dec 28, 2005)
[4294698.464000] PCI: Enabling device 0000:04:00.0 (0000 -> 0002)
[4294698.464000] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 18 (level, low) -> IRQ 185
[4294698.464000] PCI: Setting latency timer of device 0000:04:00.0 to 64
[4294698.490000] eth0: Tigon3 [partno(BCM95789) rev 4201 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:16:36:54:a9:ae
[4294698.490000] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
[4294698.490000] eth0: dma_rwctrl[76180000]
[4294717.209000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294717.209000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[4294718.482000] Linux agpgart interface v0.101 (c) Dave Jones
[4294718.489000] agpgart: Detected an Intel 945GM Chipset.
[4294718.516000] agpgart: AGP aperture is 256M @ 0x0
[4294718.612000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294718.614000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294719.407000] NET: Registered protocol family 17
[4294719.550000] ieee80211_1_1_13_crypt: registered algorithm 'NULL'
[4294719.551000] ieee80211_1_1_13: 802.11 data/management/control stack, 1.1.13
[4294719.551000] ieee80211_1_1_13: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[4294719.591000] ieee80211_crypt: registered algorithm 'NULL'
[4294719.629000] ieee80211: 802.11 data/management/control stack, git-1.1.7
[4294719.629000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[4294719.827000] hw_random: RNG not detected
[4294720.151000] Real Time Clock Driver v1.12
[4294720.279000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 82
[4294720.280000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[4294720.318000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.0.3m
[4294720.318000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[4294720.386000] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
[4294720.553000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[4294720.553000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177
[4294720.553000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[4294720.553000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[4294720.695000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x12a0b1, caps: 0xa04713/0x204000
[4294720.741000] input: SynPS/2 Synaptics TouchPad as /class/input/input1
[4294721.223000] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) -> IRQ 201
[4294721.223000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0094]
[4294721.223000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294721.223000] Yenta: Routing CardBus interrupts to PCI
[4294721.223000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[4294721.446000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 201
[4294721.446000] Socket status: 30000006
[4294721.446000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[4294721.446000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[4294721.446000] cs: IO port probe 0x3000-0x3fff: clean.
[4294721.446000] pcmcia: parent PCI bridge Memory window: 0xc8400000 - 0xc84fffff
[4294721.447000] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x89ffffff
[4294721.587000] ts: Compaq touchscreen protocol output
[4294722.051000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[4294722.107000] cs: IO port probe 0x100-0x3af: excluding 0x370-0x377
[4294722.109000] cs: IO port probe 0x3e0-0x4ff: excluding 0x3f0-0x3f7 0x4d0-0x4d7
[4294722.110000] cs: IO port probe 0x820-0x8ff: clean.
[4294722.111000] cs: IO port probe 0xc00-0xcf7: clean.
[4294722.111000] cs: IO port probe 0xa00-0xaff: clean.
[4294725.948000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294725.948000] md: bitmap version 4.39
[4294726.357000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294728.069000] Assertion failed! qc->n_elem > 0,drivers/scsi/libata-core.c,ata_fill_sg,line=2531
[4294733.966000] ACPI: AC Adapter [ACAD] (on-line)
[4294734.050000] ACPI: Battery Slot [BAT1] (battery present)
[4294734.101000] ACPI: Power Button (FF) [PWRF]
[4294734.101000] ACPI: Lid Switch [LID]
[4294734.101000] ACPI: Power Button (CM) [PWRB]
[4294734.101000] ACPI: Sleep Button (CM) [SLPB]
[4294734.184000] ibm_acpi: ec object not found
[4294734.205000] pcc_acpi: loading...
[4294734.239000] wmi_add device=df88f000
[4294734.239000] calling WQBA
[4294743.718000] lp: driver loaded but no devices found
[4294743.787000] ppdev: user-space parallel port driver
[4294744.575000] apm: BIOS not found.
[4294752.686000] Bluetooth: Core ver 2.8
[4294752.686000] NET: Registered protocol family 31
[4294752.686000] Bluetooth: HCI device and connection manager initialized
[4294752.686000] Bluetooth: HCI socket layer initialized
[4294752.783000] Bluetooth: L2CAP ver 2.8
[4294752.783000] Bluetooth: L2CAP socket layer initialized
[4294752.933000] Bluetooth: RFCOMM socket layer initialized
[4294752.933000] Bluetooth: RFCOMM TTY layer initialized
[4294752.933000] Bluetooth: RFCOMM ver 1.7
[4294755.196000] NET: Registered protocol family 10
[4294755.196000] lo: Disabled Privacy Extensions
[4294755.196000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[4294755.196000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4294755.196000] IPv6 over IPv4 tunneling driver
[4295819.695000] ieee80211_crypt: registered algorithm 'WEP'
[4295819.769000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4295973.593000] ADDRCONF(NETDEV_UP): eth1: link is not ready
[4296403.414000] usb 5-4: new high speed USB device using ehci_hcd and address 3
[4296407.672000] Initializing USB Mass Storage driver...
[4296407.673000] scsi2 : SCSI emulation for USB Mass Storage devices
[4296407.673000] usb-storage: device found at 3
[4296407.673000] usb-storage: waiting for device to settle before scanning
[4296407.673000] usbcore: registered new driver usb-storage
[4296407.673000] USB Mass Storage support registered.
[4296412.673000] Vendor: SanDisk Model: Cruzer Micro Rev: 0.4
[4296412.673000] Type: Direct-Access ANSI SCSI revision: 02
[4296412.675000] SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
[4296412.675000] sdb: Write Protect is off
[4296412.675000] sdb: Mode Sense: 03 00 00 00
[4296412.675000] sdb: assuming drive cache: write through
[4296412.678000] SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
[4296412.678000] sdb: Write Protect is off
[4296412.678000] sdb: Mode Sense: 03 00 00 00
[4296412.678000] sdb: assuming drive cache: write through
[4296412.678000] sdb: sdb1
[4296412.679000] sd 2:0:0:0: Attached scsi removable disk sdb
[4296412.679000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[4296412.681000] usb-storage: device scan complete
[4296413.251000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
More information about the freebsd-mobile
mailing list