6.0-REL && iwi && wistumbler2

[guru at Sisis.de]

El día Saturday, April 08, 2006 a las 01:22:53PM -0700, Sam Leffler escribió:

> The right solution is to use bpf to collect 802.11 frames either from 
> the 802.11 layer or from the driver.  At the 802.11 layer you get raw 
> frames.  At the driver layer you get much more info (rssi, channel, 
> etc.).  This is how kismet, ethereal, etc. work.  I've had patches to 
> dstumbler for several years to do this:
> 
> http://www.freebsd.org/~sam/dstumbler.tgz
> 
> Some cards require that you operate in monitor mode to get interesting 
> information.  I do not know wistumbler2 to know if it works like 
> this--but if it does then it can work with any wireless card that is 
> properly integrated into the system.

I've compiled and installed it, but 'dstumbler iwi0' freezes the
system;

	matthias