ACPI-related weird behaviour of PCMCIA network adapter
Björn König
bkoenig at cs.tu-berlin.de
Tue Sep 27 08:11:42 PDT 2005
Hello,
I have an IBM Thinkpad 600 (Pentium II 300) with a 3com Megahertz 574B
PCMCIA network adapter.
ACPI-related commits to HEAD on November 23th 2004 have broken
something. These commits concern the files
src/sys/dev/acpica/acpi_pci_link.c
src/sys/dev/acpica/acpi_pcib.c
src/sys/dev/acpica/acpi_pcib_acpi.c
src/sys/dev/acpica/acpi_pcib_pci.c
src/sys/dev/acpica/acpi_pcibvar.h
The problem is that the network adapter behaves very strange. It works
overall and there is no packet loss, but there is a high latency and a
low throughput as a result. The output of ping might give a clue what's
going on:
before:
64 bytes from 192.168.1.4: icmp_seq=0 ttl=64 time=0.690 ms
64 bytes from 192.168.1.4: icmp_seq=1 ttl=64 time=0.565 ms
64 bytes from 192.168.1.4: icmp_seq=2 ttl=64 time=0.560 ms
64 bytes from 192.168.1.4: icmp_seq=3 ttl=64 time=0.579 ms
after:
64 bytes from 192.168.1.4: icmp_seq=0 ttl=64 time=642.271 ms
64 bytes from 192.168.1.4: icmp_seq=1 ttl=64 time=765.606 ms
64 bytes from 192.168.1.4: icmp_seq=2 ttl=64 time=8652.092 ms
64 bytes from 192.168.1.4: icmp_seq=3 ttl=64 time=7651.296 ms
64 bytes from 192.168.1.4: icmp_seq=4 ttl=64 time=6650.415 ms
64 bytes from 192.168.1.4: icmp_seq=5 ttl=64 time=5649.384 ms
64 bytes from 192.168.1.4: icmp_seq=6 ttl=64 time=4648.452 ms
64 bytes from 192.168.1.4: icmp_seq=7 ttl=64 time=3647.554 ms
64 bytes from 192.168.1.4: icmp_seq=8 ttl=64 time=2646.692 ms
64 bytes from 192.168.1.4: icmp_seq=9 ttl=64 time=1645.702 ms
64 bytes from 192.168.1.4: icmp_seq=10 ttl=64 time=644.745 ms
64 bytes from 192.168.1.4: icmp_seq=11 ttl=64 time=754.280 ms
64 bytes from 192.168.1.4: icmp_seq=12 ttl=64 time=8653.586 ms
64 bytes from 192.168.1.4: icmp_seq=13 ttl=64 time=7652.703 ms
64 bytes from 192.168.1.4: icmp_seq=14 ttl=64 time=6651.699 ms
64 bytes from 192.168.1.4: icmp_seq=15 ttl=64 time=5651.197 ms
64 bytes from 192.168.1.4: icmp_seq=16 ttl=64 time=4650.333 ms
64 bytes from 192.168.1.4: icmp_seq=17 ttl=64 time=3649.383 ms
64 bytes from 192.168.1.4: icmp_seq=18 ttl=64 time=2648.421 ms
64 bytes from 192.168.1.4: icmp_seq=19 ttl=64 time=1647.459 ms
64 bytes from 192.168.1.4: icmp_seq=20 ttl=64 time=646.492 ms
64 bytes from 192.168.1.4: icmp_seq=21 ttl=64 time=743.899 ms
There is a scheme. It looks like that 9 replies arrives at the same
time; in this case the packets with the sequence number 2-10 and 12-20.
It continues periodically. The length of a period is exactly 10 seconds.
I attached output of 'vmstat -i' and verbose boot messages to this mail.
I would appreciate a hint to make it easier for me to find the
responsible piece of code in the huge changes of November 23th.
Regards
Björn
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Tue Sep 27 12:49:45 UTC 2005
root at nestor.local:/usr/obj/usr/src/sys/SYN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0634000.
Preloaded elf module "/boot/modules/acpi_broken.ko" at 0xc063415c.
Calibrating clock(s) ... i8254 clock: 1193108 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 298422367 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201129984 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000000bc40fff, 188858368 bytes (46108 pages)
avail memory = 191578112 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
VESA: information block
56 45 53 41 00 02 1f 01 00 01 00 00 00 00 22 00
00 01 1f 00 10 01 00 01 00 01 09 01 00 01 1a 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 12 01 13 01 14 01 15 01 16 01
VESA: 22 mode(s) found
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc05ef342 (1000022)
VESA: MagicGraph 128XD 40K SVGA BIOS
VESA: NeoMagic MagicGraph 128XV 01.0
mem: <memory>
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
null: <null device, zero device>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP600> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Found $PIR table, 4 entries at 0xc00f9e40
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 1
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 10 us
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 50 us
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
ACPI timer: 0/5 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
pci_link0: <ACPI PCI Link LNKA> on acpi0
pci_link0: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link0: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: <ACPI PCI Link LNKB> on acpi0
pci_link1: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link1: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: <ACPI PCI Link LNKC> on acpi0
pci_link2: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link2: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: <ACPI PCI Link LNKD> on acpi0
pci_link3: Links after initial probe:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after initial validation:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
pci_link3: Links after disable:
Index IRQ Rtd Ref IRQs
0 255 N 0 3 4 5 6 7 9 10 11 12 14 15
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20301000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 20300000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 24, enabled
map[14]: type 1, range 32, base 20000000, size 21, enabled
map[18]: type 1, range 32, base 20200000, size 20, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKA:0)
pci_link0: Picked IRQ 9 with weight 0
pcib0: slot 3 INTA routed to irq 9 via \\_SB_.LNKA
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=9
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00008400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD:0)
pci_link3: Picked IRQ 9 with weight 3
pcib0: slot 7 INTD routed to irq 9 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=9
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x20301000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA:0)
pcib0: slot 2 INTA routed to irq 9 via \\_SB_.LNKA
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20301000 0x020000a0 0xb0030100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x07400109
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00808000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x20300000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.2.INTB (src \\_SB_.LNKB:0)
pci_link1: Picked IRQ 9 with weight 4
pcib0: slot 2 INTB routed to irq 9 via \\_SB_.LNKB
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20300000 0x020000a0 0xb0060400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x07400209
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00808000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <display, VGA> at device 3.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcf0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0:7:2: Transition from D0 to D3
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0:7:3: Transition from D0 to D3
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
acpi_ec0: info: new max delay is 60 us
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 70 us
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 298422367 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
acpi_cmbat0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <HITACHI DK239A-65B/00X5A0B6> ATA-4 disk at ata0-master
ad0: 6149MB (12594960 sectors), 13328 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
acpi_tz1: _AC1: temperature 44.8 >= setpoint 40.5
acpi_tz1: _AC0: temperature 44.8 >= setpoint 41.5
acpi_tz1: switched from NONE to _AC0: 44.8C
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acd0: <SANYO CRD-S372BV/1.24VB> CDROM drive at ata1 as master
acd0: read 1377KB/s (4125KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
acpi_tz1: _AC1: temperature 44.8 >= setpoint 40.5
acpi_tz1: _AC1: temperature 44.8 >= setpoint 40.5
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3Com, Megahertz 574B, B, 001
pccard0: Manufacturer code 0x101, product 0x574
pccard0: function 0: network adapter, ccr addr 10000 mask 3
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 5, iospace 0-1f; io8 io16 irqlevel
ep0: <3Com Megahertz 574B> at port 0x100-0x11f irq 9 function 0 config 1 on pccard0
Unknown ID: 0x201
ep0: Pass 1 of 2 detection failed (nonfatal) id 0x201
ep0: bpf attached
ep0: Ethernet address: 00:01:03:81:cf:61
ep0: [MPSAFE]
acpi_tz1: _AC1: temperature 44.8 >= setpoint 40.5
-------------- next part --------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 6.0-CURRENT #0: Tue Sep 27 12:49:45 UTC 2005
root at nestor.local:/usr/obj/usr/src/sys/SYN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0634000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc063415c.
Calibrating clock(s) ... i8254 clock: 1193107 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 298422322 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (298.42-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping = 2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 201129984 (191 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000825000 - 0x000000000bc40fff, 188858368 bytes (46108 pages)
avail memory = 191578112 (182 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fd800
bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x0
pnpbios: Found PnP BIOS data at 0xc00fe700
pnpbios: Entry = f0000:e724 Rev = 1.0
pnpbios: Event flag at 415
Other BIOS signatures found:
VESA: information block
56 45 53 41 00 02 1f 01 00 01 00 00 00 00 22 00
00 01 1f 00 10 01 00 01 00 01 09 01 00 01 1a 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 0d 01
0e 01 10 01 11 01 12 01 13 01 14 01 15 01 16 01
VESA: 22 mode(s) found
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc05ef342 (1000022)
VESA: MagicGraph 128XD 40K SVGA BIOS
VESA: NeoMagic MagicGraph 128XV 01.0
mem: <memory>
Pentium Pro MTRR support enabled
random: <entropy source, Software, Yarrow>
null: <null device, zero device>
io: <I/O>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <IBM TP600> on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x000038c8
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71928086)
pcibios: BIOS version 2.10
Found $PIR table, 4 entries at 0xc00f9e40
PCI-Only Interrupts: 11
Location Bus Device Pin Link IRQs
embedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 1 func 0
acpi0: [MPSAFE]
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 2 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 7 func 1
acpi0: Power Button (fixed)
atpic: Programming IRQ9 as level/low
acpi_ec0: <Embedded Controller: GPE 0x9> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 10 us
acpi_ec0: info: new max delay is 20 us
acpi_ec0: info: new max delay is 30 us
acpi_ec0: info: new max delay is 50 us
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 1
ACPI timer: 0/4 0/4 0/4 0/5 0/4 0/4 0/5 0/4 0/4 0/4 -> 0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xef08-0xef0b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.LNKD irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.7.3
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.2.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.2.1
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.3.0
\\_SB_.LNKB irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.5.0
\\_SB_.LNKA irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] 0+ low,level,sharable 0.6.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base 00000000, size 28, enabled
found-> vendor=0x8086, dev=0x7192, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0xa200, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 20301000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 20300000, size 12, enabled
found-> vendor=0x104c, dev=0xac16, revid=0x02
bus=0, slot=2, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0xa8 (5040 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=b, irq=255
powerspec 1 supports D0 D1 D2 D3 current D0
map[10]: type 3, range 32, base e0000000, size 24, enabled
map[14]: type 1, range 32, base 20000000, size 21, enabled
map[18]: type 1, range 32, base 20200000, size 20, enabled
pcib0: matched entry for 0.3.INTA (src \\_SB_.LNKA)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKA (references 3, priority 34300):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
\\_SB_.LNKB (references 2, priority 22867):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
\\_SB_.LNKD (references 1, priority 11433):
interrupts: 11 10 5 9 12 7 6 4 3 15 14
penalty: 60 60 110 120 5060 5060 5060 5060 5060 50060 50060
acpi link set: _CRS failed for link \\_SB_.LNKA - AE_NULL_ENTRY
acpi link set: curr irq 0 != 11 for \\_SB_.LNKA
pcib0: slot 3 INTA routed to irq 11 via \\_SB_.LNKA
found-> vendor=0x10c8, dev=0x0004, revid=0x01
bus=0, slot=3, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x10 (4000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
found-> vendor=0x8086, dev=0x7110, revid=0x01
bus=0, slot=7, func=0
class=06-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000fcf0, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00008400, size 5, enabled
pcib0: matched entry for 0.7.INTD (src \\_SB_.LNKD)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 2, priority 23003):
interrupts: 10 11 5 9 12 7 6 4 3 15 14
penalty: 120 150 170 240 5120 5120 5120 5120 5120 50120 50120
\\_SB_.LNKD (references 1, priority 11501):
interrupts: 10 11 5 9 12 7 6 4 3 15 14
penalty: 120 150 170 240 5120 5120 5120 5120 5120 50120 50120
acpi link set: _CRS failed for link \\_SB_.LNKD - AE_NULL_ENTRY
acpi link set: curr irq 0 != 10 for \\_SB_.LNKD
atpic: Programming IRQ10 as level/low
pcib0: slot 7 INTD routed to irq 10 via \\_SB_.LNKD
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=7, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x30 (1440 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=10
map[90]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x01
bus=0, slot=7, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20301000-0x20301fff at device 2.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x20301000
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: matched entry for 0.2.INTA (src \\_SB_.LNKA)
pcib0: slot 2 INTA is already routed to irq 11
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20301000 0x020000a0 0xb0030100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740010b
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00808000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20300000-0x20300fff at device 2.1 on pci0
cbb1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0x20300000
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: matched entry for 0.2.INTB (src \\_SB_.LNKB)
pcib0: possible interrupts: 3 4 5 6 7 9 10 11 12 14 15
ACPI PCI link arbitrated settings:
\\_SB_.LNKB (references 2, priority 23147):
interrupts: 10 5 11 9 12 7 6 4 3 15 14
penalty: 190 230 270 360 5180 5180 5180 5180 5180 50180 50180
acpi link set: _CRS failed for link \\_SB_.LNKB - AE_NULL_ENTRY
acpi link set: curr irq 0 != 10 for \\_SB_.LNKB
pcib0: slot 2 INTB routed to irq 10 via \\_SB_.LNKB
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0xac16104c 0x02100007 0x06070002 0x0082a808
0x10: 0x20300000 0x020000a0 0xb0060400 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
0x30: 0x00000000 0x0000fffc 0x00000000 0x0740020a
0x40: 0x00921014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00449061 0x00000000 0x09818148 0xfba97543
0x90: 0x606202c0 0x00000000 0x00000000 0x00000000
0xa0: 0x7e210001 0x00808000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci0: <display, VGA> at device 3.0 (no driver attached)
PCI-ISA bridge with incorrect subclass 0x80
PCI-ISA bridge with incorrect subclass 0x80
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfcf0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0xd0 err=0xd0 lsb=0xd0 msb=0xd0
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=01
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x01 err=0x04 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=01 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <serial bus, USB> at device 7.2 (no driver attached)
pci0:7:2: Transition from D0 to D3
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
pci0:7:3: Transition from D0 to D3
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x54ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_ec0: info: new max delay is 70 us
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 298422322 Hz quality 800
Timecounters tick every 1.000 msec
lo0: bpf attached
Interrupt storm detected on "irq10: cbb1"; throttling interrupt source
acpi_cmbat0: battery initialization start
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
ata0-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: setting PIO4 on Intel PIIX4 chip
ata0-master: setting UDMA33 on Intel PIIX4 chip
ad0: <HITACHI DK239A-65B/00X5A0B6> ATA-4 disk at ata0-master
ad0: 6149MB (12594960 sectors), 13328 C, 15 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
ata1-master: pio=0x0c wdma=0x22 udma=0xffffffff cable=40pin
ata1-master: setting PIO4 on Intel PIIX4 chip
acpi_tz1: _AC1: temperature 43.8 >= setpoint 40.5
acpi_tz1: _AC0: temperacd0: <SANYO CRD-S372BV/1.24VB> CDROM drive at ata1 as master
acd0: read 1377KB/s (4125KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ature 43.8 >= setpoint 41.5
acpi_tz1: switched from NONE to _AC0: 43.8C
acpi_tz1: _AC1: temperature 43.8 >= setpoint 40.5
acpi_tz1: _AC1: temperature 43.8 >= setpoint 40.5
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
pccard0: CIS version PCCARD 2.0 or 2.1
pccard0: CIS info: 3Com, Megahertz 574B, B, 001
pccard0: Manufacturer code 0x101, product 0x574
pccard0: function 0: network adapter, ccr addr 10000 mask 3
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 5, iospace 0-1f; io8 io16 irqlevel
ep0: <3Com Megahertz 574B> at port 0x100-0x11f irq 11 function 0 config 1 on pccard0
Unknown ID: 0x201
ep0: Pass 1 of 2 detection failed (nonfatal) id 0x201
ep0: bpf attached
ep0: Ethernet address: 00:01:03:81:cf:61
ep0: [MPSAFE]
acpi_tz1: _AC1: temperature 43.8 >= setpoint 40.5
-------------- next part --------------
interrupt total rate
irq0: clk 43188 981
irq1: atkbd0 80 1
irq8: rtc 5529 125
irq9: cbb0 cbb1 ep+ 90 2
irq13: npx0 1 0
irq14: ata0 721 16
irq15: ata1 58 1
Total 49667 1128
-------------- next part --------------
interrupt total rate
irq0: clk 215177 996
irq1: atkbd0 4 0
irq8: rtc 27541 127
irq9: acpi0 332 1
irq10: cbb1 212249 982
irq11: cbb0 ep0 1621 7
irq13: npx0 1 0
irq14: ata0 1015 4
irq15: ata1 58 0
Total 457998 2120
More information about the freebsd-mobile
mailing list