Toshiba ToPIC95B not working on 6.0-BETA4
Niels Heinen
niels at FreeBSD.org
Tue Sep 13 05:46:15 PDT 2005
Already replying to my own mail.. sorry..
Attached some more debug info that might give someone a clue..
Cheers,
Niels
On Tue, Sep 13, 2005 at 11:53:42AM +0200, Niels Heinen wrote:
>
> Hi all,
>
> I recently received a Toshiba 460CDT and am trying to get
> the most out of it. Its an old device but should still be
> usable. Unfortunately I can't get PCMCIA to work.
>
> In the BIOS you can configure the 'PC Card controller mode'. When I
> set it to PCIC compatible, I see nothing in the dmesg. When I set
> it to CardBus/16-but I see that the slots are detected.
>
> However, whenever I insert a PCMCIA device, like my Prims/2 based
> NIC, which works fine in my other FreeBSD devices, I get:
>
> CIS is too long -- truncating
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
>
> This must be a bug.. maybe its in the Toshiba ToPIC95B support ?
>
> I attached the following files:
>
> cardbus-pciconf.txt pciconf while using CardBus/16-but
> dmesg-cardbus.txt dmesg while using CardBus/16-but
> dmesg-pcic.txt dmesg while using PCIC compatibile mode
>
> Any help is appriciated ! ;-)
>
> Niels
>
> hostb0 at pci0:0:0: class=0x060000 card=0x00000000 chip=0x06011179 rev=0xa7 hdr=0x00
> vendor = 'Toshiba America Information Systems'
> device = 'Pentium Host Bridge for Notebooks'
> class = bridge
> subclass = HOST-PCI
> cbb0 at pci0:2:0: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
> vendor = 'Toshiba America Information Systems'
> device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
> class = bridge
> subclass = PCI-CardBus
> cbb1 at pci0:2:1: class=0x060700 card=0x00000000 chip=0x060a1179 rev=0x07 hdr=0x02
> vendor = 'Toshiba America Information Systems'
> device = 'ToPIC95B Toshiba ToPIC95 CardBus Controller'
> class = bridge
> subclass = PCI-CardBus
> none0 at pci0:4:0: class=0x030000 card=0x00000000 chip=0x00e4102c rev=0xc2 hdr=0x00
> vendor = 'Asiliant (Chips And Technologies)'
> device = '65554 Flat Panel/LCD CRT GUI Accelerator'
> class = display
> subclass = VGA
> ohci0 at pci0:11:0: class=0x0c0310 card=0x00000000 chip=0x00351033 rev=0x01 hdr=0x00
> vendor = 'NEC Electronics Hong Kong'
> device = 'uPD9210FGC-7EA / µPD720101 USB 1.0 Host Controller (OHCI compliant)'
> class = serial bus
> subclass = USB
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
> root@:/usr/src/sys/i386/compile/TOSHI
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
> Calibrating clock(s) ... i8254 clock: 1193106 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 165790095 Hz
> CPU: Pentium/P55C (165.79-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x543 Stepping = 3
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 33685504 (32 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
> avail memory = 23515136 (22 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xdcf1
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:9c9f Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID 2932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> wlan: <802.11 Link Layer>
> mem: <memory>
> nfslock: pseudo-device
> null: <null device, zero device>
> io: <I/O>
> random: <entropy source, Software, Yarrow>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
> pcibios: BIOS version 2.10
> Found $PIR table, 3 entries at 0xc00f97e0
> PCI-Only Interrupts: none
> Location Bus Device Pin Link IRQs
> embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 2 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> embedded 0 2 B 0x01 3 4 5 6 7 9 10 11 12 14 15
> slot 1 0 6 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> slot 1 0 6 B 0x01 3 4 5 6 7 9 10 11 12 14 15
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 3 Entries> on motherboard
> $PIR: Links after initial probe:
> Link IRQ Rtd Ref IRQs
> 0x1 255 N 5 3 4 5 6 7 9 10 11 12 14 15
> $PIR: Found matching pin for 0.11.INTA at func 0: 11
> $PIR: Found matching pin for 0.2.INTA at func 0: 11
> $PIR: Found matching pin for 0.2.INTB at func 1: 11
> $PIR: Links after initial IRQ discovery:
> Link IRQ Rtd Ref IRQs
> 0x1 11 Y 5 3 4 5 6 7 9 10 11 12 14 15
> $PIR: IRQs used by BIOS: 11
> $PIR: Interrupt Weights:
> [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
> [ 0 0 0 0 0 0 0 0 0 0 0 5 0 0 0 0 ]
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x1179, dev=0x0601, revid=0xa7
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x1179, dev=0x060a, revid=0x07
> bus=0, slot=2, func=0
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=a, irq=11
> map[10]: type 1, range 32, base 00000000, size 12, memory disabled
> $PIR: 0:2 INTA routed to irq 11
> found-> vendor=0x1179, dev=0x060a, revid=0x07
> bus=0, slot=2, func=1
> class=06-07-00, hdrtype=0x02, mfdev=1
> cmdreg=0x0004, statreg=0x0480, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> intpin=b, irq=11
> map[10]: type 1, range 32, base 00000000, size 12, memory disabled
> $PIR: 0:2 INTB routed to irq 11
> found-> vendor=0x102c, dev=0x00e4, revid=0xc2
> bus=0, slot=4, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type 1, range 32, base fe000000, size 24, enabled
> found-> vendor=0x1033, dev=0x0035, revid=0x01
> bus=0, slot=11, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
> intpin=a, irq=11
> map[10]: type 1, range 32, base fdfff000, size 12, enabled
> $PIR: 0:11 INTA routed to irq 11
> cbb0: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.0 on pci0
> cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80000000
> pccard0: <16-bit PCCard bus> on cbb0
> cbb0: [MPSAFE]
> cbb0: PCI Configuration space:
> 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
> 0x10: 0x80000000 0x04800000 0x00141400 0xfffff000
> 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
> 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400010b
> 0x40: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x00000000 0x00000000 0x00000002 0x00000000
> 0x90: 0x00000001 0x00000000 0x00000000 0x00000000
> 0xa0: 0x86001cf0 0x00000002 0x00000000 0x0000fd80
> 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
> cbb1: <ToPIC95B PCI-CardBus Bridge> irq 11 at device 2.1 on pci0
> cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0x80001000
> pccard1: <16-bit PCCard bus> on cbb1
> cbb1: [MPSAFE]
> cbb1: PCI Configuration space:
> 0x00: 0x060a1179 0x04800007 0x06070007 0x00820000
> 0x10: 0x80001000 0x04800000 0x00151500 0xfffff000
> 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc
> 0x30: 0x00000000 0x0000fffc 0x00000000 0x0400020b
> 0x40: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x50: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x60: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x70: 0x00000000 0x00000000 0x00000000 0x00000000
> 0x80: 0x00000000 0x00000000 0x00000002 0x00000000
> 0x90: 0x00000001 0x00000000 0x00000000 0x00000000
> 0xa0: 0x86002cf0 0x00000002 0x00000000 0x0000fd80
> 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
> 0xf0: 0x00000000 0x00000000 0x00000000 0x00000008
> pci0: <display, VGA> at device 4.0 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0: <ISA bus> on motherboard
> ex_isa_identify()
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 18 devices, largest 192 bytes
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> pnpbios: handle 1 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
> PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> pnpbios: handle 2 device ID PNP0200 (0002d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 0x1
> pnpbios: handle 4 device ID PNP0100 (0001d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 0x2
> pnpbios: handle 7 device ID PNP0303 (0303d041)
> TOS7400: adding irq mask 0x1000
> pnpbios: handle 8 device ID TOS7400 (0074f351)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> pnpbios: handle 9 device ID PNP0b00 (000bd041)
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
> PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
> PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
> PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
> PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
> PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
> PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
> PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
> PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> pnpbios: handle 11 device ID PNP0700 (0007d041)
> PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
> PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
> PNP0600: adding irq mask 0x4000
> pnpbios: handle 12 device ID PNP0600 (0006d041)
> PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
> PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
> PNP0600: adding irq mask 0x8000
> pnpbios: handle 13 device ID PNP0600 (0006d041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
> PNP0501: adding irq mask 0x10
> pnpbios: handle 14 device ID PNP0501 (0105d041)
> PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
> PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
> PNP0401: adding irq mask 0x80
> PNP0401: adding dma mask 0x8
> pnpbios: handle 16 device ID PNP0401 (0104d041)
> pnpbios: handle 17 device ID PNP0a03 (030ad041)
> pnpbios: handle 22 device ID TOS7009 (0970f351)
> YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
> YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
> YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> pnpbios: handle 23 device ID YMH0021 (2100a865)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata0: [MPSAFE]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
> ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0: ic_type 80 part_id 80
> fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: ic_type 80 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: ECP SPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x1 0x1 0x1 0x1
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
> unknown: <PNP0800> failed to probe at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <TOS7400> can't assign resources (irq)
> unknown: <TOS7400> at irq 12 on isa0
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x170-0x177 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0401> at port 0x378-0x37a on isa0
> unknown: <TOS7009> failed to probe on isa0
> unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 165790095 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
> ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
> acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
> acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
> acd0: Reads: CDR, CDDA, packet
> acd0: Writes:
> acd0: Audio: play, 255 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ATA PseudoRAID loaded
> CIS is too long -- truncating
> pccard0: Card has no functions!
> cbb0: PC Card card activation failed
> GEOM: new disk ad0
> Trying to mount root from ufs:/dev/ad0s1a
> start_init: trying /sbin/init
> Linux ELF exec handler installed
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA4 #1: Mon Nov 18 06:32:17 CET 2002
> root@:/usr/src/sys/i386/compile/TOSHI
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc085f000.
> Calibrating clock(s) ... i8254 clock: 1193096 Hz
> CLK_USE_I8254_CALIBRATION not specified - using default frequency
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Calibrating TSC clock ... TSC clock: 165790005 Hz
> CPU: Pentium/P55C (165.79-MHz 586-class CPU)
> Origin = "GenuineIntel" Id = 0x543 Stepping = 3
> Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> real memory = 33685504 (32 MB)
> Physical memory chunk(s):
> 0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
> 0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
> 0x0000000000c25000 - 0x0000000001f56fff, 20127744 bytes (4914 pages)
> avail memory = 23515136 (22 MB)
> bios32: Found BIOS32 Service Directory header at 0xc00f8e20
> bios32: Entry = 0xfe95b (c00fe95b) Rev = 0 Len = 1
> pcibios: PCI BIOS entry at 0xf0000+0xdcf1
> pnpbios: Found PnP BIOS data at 0xc00f8e30
> pnpbios: Entry = f0000:9c9f Rev = 1.0
> pnpbios: Event flag at 510
> pnpbios: OEM ID 2932f351
> Other BIOS signatures found:
> Intel Pentium detected, installing workaround for F00F bug
> wlan: <802.11 Link Layer>
> mem: <memory>
> nfslock: pseudo-device
> null: <null device, zero device>
> io: <I/O>
> random: <entropy source, Software, Yarrow>
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> cpu0 on motherboard
> pci_open(1): mode 1 addr port (0x0cf8) is 0x80001850
> pci_open(1a): mode1res=0x80000000 (0x80000000)
> pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=06011179)
> pcibios: BIOS version 2.10
> Found $PIR table, 1 entries at 0xc00f97e0
> PCI-Only Interrupts: none
> Location Bus Device Pin Link IRQs
> embedded 0 11 A 0x01 3 4 5 6 7 9 10 11 12 14 15
> pcib0: <Host to PCI bridge> pcibus 0 on motherboard
> pir0: <PCI Interrupt Routing Table: 1 Entries> on motherboard
> $PIR: Links after initial probe:
> Link IRQ Rtd Ref IRQs
> 0x1 255 N 1 3 4 5 6 7 9 10 11 12 14 15
> $PIR: Found matching pin for 0.11.INTA at func 0: 11
> $PIR: Links after initial IRQ discovery:
> Link IRQ Rtd Ref IRQs
> 0x1 11 Y 1 3 4 5 6 7 9 10 11 12 14 15
> $PIR: IRQs used by BIOS: 11
> $PIR: Interrupt Weights:
> [ 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 ]
> [ 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 ]
> pci0: <PCI bus> on pcib0
> pci0: physical bus=0
> found-> vendor=0x1179, dev=0x0601, revid=0xa7
> bus=0, slot=0, func=0
> class=06-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x2280, cachelnsz=8 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> found-> vendor=0x102c, dev=0x00e4, revid=0xc2
> bus=0, slot=4, func=0
> class=03-00-00, hdrtype=0x00, mfdev=0
> cmdreg=0x0083, statreg=0x0280, cachelnsz=0 (dwords)
> lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
> map[10]: type 1, range 32, base fe000000, size 24, enabled
> found-> vendor=0x1033, dev=0x0035, revid=0x01
> bus=0, slot=11, func=0
> class=0c-03-10, hdrtype=0x00, mfdev=0
> cmdreg=0x0006, statreg=0x0a00, cachelnsz=0 (dwords)
> lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x15 (5250 ns)
> intpin=a, irq=11
> map[10]: type 1, range 32, base fdfff000, size 12, enabled
> $PIR: 0:11 INTA routed to irq 11
> pci0: <display, VGA> at device 4.0 (no driver attached)
> ohci0: <NEC uPD 9210 USB controller> mem 0xfdfff000-0xfdffffff irq 11 at device 11.0 on pci0
> ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfdfff000
> ohci0: [GIANT-LOCKED]
> usb0: OHCI version 1.0
> usb0: <NEC uPD 9210 USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> isa0: <ISA bus> on motherboard
> ex_isa_identify()
> pnp_identify: Trying Read_Port at 203
> pnp_identify: Trying Read_Port at 243
> pnp_identify: Trying Read_Port at 283
> pnp_identify: Trying Read_Port at 2c3
> pnp_identify: Trying Read_Port at 303
> pnp_identify: Trying Read_Port at 343
> pnp_identify: Trying Read_Port at 383
> pnp_identify: Trying Read_Port at 3c3
> PNP Identify complete
> pnpbios: 19 devices, largest 192 bytes
> PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
> PNP0c01: adding fixed memory32 range 0xf0000-0xfffff, size=0x10000
> PNP0c01: adding fixed memory32 range 0x100000-0x201ffff, size=0x1f20000
> PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
> pnpbios: handle 1 device ID PNP0c01 (010cd041)
> PNP0200: adding io range 0-0xf, size=0x10, align=0x1
> PNP0200: adding io range 0x81-0x83, size=0x3, align=0x1
> PNP0200: adding io range 0x87-0x87, size=0x1, align=0x1
> PNP0200: adding io range 0x89-0x8b, size=0x3, align=0x1
> PNP0200: adding io range 0x8f-0x8f, size=0x1, align=0x1
> PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
> PNP0200: adding dma mask 0x10
> pnpbios: handle 2 device ID PNP0200 (0002d041)
> PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
> PNP0100: adding irq mask 0x1
> pnpbios: handle 4 device ID PNP0100 (0001d041)
> PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
> pnpbios: handle 5 device ID PNP0800 (0008d041)
> PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
> PNP0c04: adding irq mask 0x2000
> pnpbios: handle 6 device ID PNP0c04 (040cd041)
> PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
> PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
> PNP0303: adding irq mask 0x2
> pnpbios: handle 7 device ID PNP0303 (0303d041)
> TOS7400: adding irq mask 0x1000
> pnpbios: handle 8 device ID TOS7400 (0074f351)
> PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
> PNP0b00: adding irq mask 0x100
> pnpbios: handle 9 device ID PNP0b00 (000bd041)
> PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
> PNP0c02: adding io range 0x84-0x86, size=0x3, align=0x1
> PNP0c02: adding io range 0x88-0x88, size=0x1, align=0x1
> PNP0c02: adding io range 0x8c-0x8e, size=0x3, align=0x1
> PNP0c02: adding io range 0xe0-0xef, size=0x10, align=0x1
> PNP0c02: adding io range 0xb0-0xb2, size=0x3, align=0x1
> PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
> PNP0c02: adding io range 0x2e-0x2f, size=0x2, align=0x1
> PNP0c02: adding io range 0x1882-0x1885, size=0x4, align=0x1
> PNP0c02: adding io range 0x1888-0x188d, size=0x6, align=0x1
> PNP0c02: adding io range 0x480-0x48f, size=0x10, align=0x1
> PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
> PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
> pnpbios: handle 10 device ID PNP0c02 (020cd041)
> PNP0700: adding io range 0x3f2-0x3f5, size=0x4, align=0x1
> PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
> PNP0700: adding irq mask 0x40
> PNP0700: adding dma mask 0x4
> pnpbios: handle 11 device ID PNP0700 (0007d041)
> PNP0600: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
> PNP0600: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
> PNP0600: adding irq mask 0x4000
> pnpbios: handle 12 device ID PNP0600 (0006d041)
> PNP0600: adding io range 0x170-0x177, size=0x8, align=0x1
> PNP0600: adding io range 0x376-0x377, size=0x2, align=0x1
> PNP0600: adding irq mask 0x8000
> pnpbios: handle 13 device ID PNP0600 (0006d041)
> PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x1
> PNP0501: adding irq mask 0x10
> pnpbios: handle 14 device ID PNP0501 (0105d041)
> PNP0401: adding io range 0x378-0x37a, size=0x3, align=0x1
> PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x1
> PNP0401: adding irq mask 0x80
> PNP0401: adding dma mask 0x8
> pnpbios: handle 16 device ID PNP0401 (0104d041)
> pnpbios: handle 17 device ID PNP0a03 (030ad041)
> PNP0e00: adding io range 0x3e0-0x3e1, size=0x2, align=0x1
> pnpbios: handle 20 device ID PNP0e00 (000ed041)
> pnpbios: handle 22 device ID TOS7009 (0970f351)
> YMH0021: adding io range 0x220-0x22f, size=0x10, align=0x1
> YMH0021: adding io range 0x530-0x537, size=0x8, align=0x1
> YMH0021: adding io range 0x388-0x38b, size=0x4, align=0x1
> YMH0021: adding io range 0x330-0x331, size=0x2, align=0x1
> YMH0021: adding io range 0x370-0x371, size=0x2, align=0x1
> YMH0021: adding irq mask 0x20
> YMH0021: adding dma mask 0x2
> YMH0021: adding dma mask 0x1
> pnpbios: handle 23 device ID YMH0021 (2100a865)
> sc: sc0 already exists; skipping it
> vga: vga0 already exists; skipping it
> isa_probe_children: disabling PnP devices
> isa_probe_children: probing non-PnP devices
> pmtimer0 on isa0
> adv0: not probed (disabled)
> aha0: not probed (disabled)
> aic0: not probed (disabled)
> ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
> ata0: reset tp1 mask=03 ostat0=50 ostat1=00
> ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
> ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
> ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
> ata0: [MPSAFE]
> ata1 at port 0x170-0x177,0x376 irq 15 on isa0
> ata1: reset tp1 mask=03 ostat0=50 ostat1=00
> ata1: stat0=0x10 err=0x01 lsb=0x14 msb=0xeb
> ata1: stat1=0x00 err=0x01 lsb=0x0f msb=0x0f
> ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
> ata1: [MPSAFE]
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> atkbd: the current kbd controller command byte 0047
> atkbd: keyboard ID 0x41ab (2)
> kbd0 at atkbd0
> kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
> atkbd0: [GIANT-LOCKED]
> psm0: current command byte:0047
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model GlidePoint, device ID 0-00, 2 buttons
> psm0: config:00000000, flags:00000008, packet size:3
> psm0: syncmask:c0, syncbits:00
> bt0: not probed (disabled)
> cs0: not probed (disabled)
> ed0: not probed (disabled)
> fdc0: ic_type 80 part_id 80
> fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> fdc0: ic_type 80 part_id 80
> fdc0: [MPSAFE]
> fdc0: [FAST]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> fe0: not probed (disabled)
> ie0: not probed (disabled)
> lnc0: not probed (disabled)
> ppc0: parallel port found at 0x378
> ppc0: using extended I/O port range
> ppc0: ECP SPP SPP
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> plip0: <PLIP network interface> on ppbus0
> plip0: bpf attached
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
> sio0: irq maps: 0x1 0x11 0x1 0x1
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> sio1: irq maps: 0x1 0x1 0x1 0x1
> sio1: probe failed test(s): 0 1 2 4 6 7 9
> sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
> sio2: not probed (disabled)
> sio3: not probed (disabled)
> sn0: not probed (disabled)
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> vt0: not probed (disabled)
> isa_probe_children: probing PnP devices
> unknown: <PNP0c01> can't assign resources (memory)
> unknown: <PNP0c01> at iomem 0-0x9ffff,0xf0000-0xfffff,0x100000-0x201ffff on isa0
> unknown: <PNP0800> failed to probe at port 0x61 on isa0
> unknown: <PNP0303> can't assign resources (port)
> unknown: <PNP0303> at port 0x60 on isa0
> unknown: <TOS7400> can't assign resources (irq)
> unknown: <TOS7400> at irq 12 on isa0
> unknown: <PNP0700> can't assign resources (port)
> unknown: <PNP0700> at port 0x3f2-0x3f5 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x1f0-0x1f7 on isa0
> unknown: <PNP0600> can't assign resources (port)
> unknown: <PNP0600> at port 0x170-0x177 on isa0
> unknown: <PNP0501> can't assign resources (port)
> unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
> unknown: <PNP0401> can't assign resources (port)
> unknown: <PNP0401> at port 0x378-0x37a on isa0
> unknown: <PNP0e00> failed to probe at port 0x3e0-0x3e1 on isa0
> unknown: <TOS7009> failed to probe on isa0
> unknown: <YMH0021> failed to probe at port 0x220-0x22f,0x530-0x537,0x388-0x38b,0x330-0x331,0x370-0x371 irq 5 drq 1,0 on isa0
> Device configuration finished.
> procfs registered
> Timecounter "TSC" frequency 165790005 Hz quality 800
> Timecounters tick every 1.000 msec
> lo0: bpf attached
> ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=80 wire
> ad0: 19077MB <FUJITSU MHS2020AT E 8307> at ata0-master PIO4
> ad0: 39070080 sectors [38760C/16H/63S] 16 sectors/interrupt 1 depth queue
> ad0: Adaptec check1 failed
> ad0: LSI (v3) check1 failed
> ad0: LSI (v2) check1 failed
> ad0: FreeBSD check1 failed
> ata0-master: pio=PIO3 wdma=WDMA1 udma=BIOSDMA cable=40 wire
> acd0: <TOSHIBA CD-ROM XM-1502BN/1001> CDROM drive at ata1 as master
> acd0: read 1722KB/s (1722KB/s), 128KB buffer, PIO3
> acd0: Reads: CDR, CDDA, packet
> acd0: Writes:
> acd0: Audio: play, 255 volume levels
> acd0: Mechanism: ejectable tray, unlocked
> acd0: Medium: no/blank disc
> ATA PseudoRAID loaded
> GEOM: new disk ad0
> Trying to mount root from ufs:/dev/ad0s1a
> WARNING: / was not properly dismounted
> start_init: trying /sbin/init
> WARNING: /tmp was not properly dismounted
> /tmp: mount pending error: blocks 16 files 4
> WARNING: /usr was not properly dismounted
> /usr: mount pending error: blocks 12 files 1
> WARNING: /var was not properly dismounted
> /var: mount pending error: blocks 36 files 10
> Linux ELF exec handler installed
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
-------------- next part --------------
pccard0: chip_socket_enable
pccard0: read_cis
cis mem map 0xc4908000 (resource: 0x88000000)
pccard0: CIS tuple chain:
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
CISTPL_NONE
00
TOO MANY CIS_NONE
CIS is too long -- truncating
CISTPL_END
ff
cis mem map c4908000
CISTPL_LINKTARGET expected, code 00 observed
pccard0: check_cis_quirks
pccard0: Card has no functions!
cbb0: PC Card card activation failed
More information about the freebsd-mobile
mailing list