nVidia Go 6600 reboot (kernel panic?)
Peter Pentchev
roam at ringlet.net
Fri Nov 25 16:57:17 GMT 2005
Hi,
I've got a nVidia GeForce Go 6600 on a Centrino chipset - and a weird
problem with it, too. The X.org default driver does not recognize
the chipset and only gives me 640x480x24bit, which is... weird :)
With ports/x11/nvidia-driver I get the "real" resolutions, and along
with them a 100% reproducible reboot when I switch to a text console
and then back to X. This smells of a kernel panic, but it does not
drop me into ddb (understandable), does not leave a crash dump or
anything...
Here's what pciconf -lv says:
hostb0 at pci0:0:0: class=0x060000 card=0x404717c0 chip=0x25908086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82915PM/GM/GMS, 82910GML Host Bridge'
class = bridge
subclass = HOST-PCI
pcib1 at pci0:1:0: class=0x060400 card=0x00000088 chip=0x25918086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82915PM/GM PCI Express Graphics Port'
class = bridge
subclass = PCI-PCI
pcib2 at pci0:28:0: class=0x060400 card=0x00000040 chip=0x26608086 rev=0x04 hdr=0x01
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW PCI Express Port 1'
class = bridge
subclass = PCI-PCI
uhci0 at pci0:29:0: class=0x0c0300 card=0x10a517c0 chip=0x26588086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci1 at pci0:29:1: class=0x0c0300 card=0x10a517c0 chip=0x26598086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci2 at pci0:29:2: class=0x0c0300 card=0x10a517c0 chip=0x265a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
uhci3 at pci0:29:3: class=0x0c0300 card=0x10a517c0 chip=0x265b8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB UHCI Controller'
class = serial bus
subclass = USB
ehci0 at pci0:29:7: class=0x0c0320 card=0x10a617c0 chip=0x265c8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW USB 2.0 EHCI Controller'
class = serial bus
subclass = USB
pcib3 at pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xd4 hdr=0x01
vendor = 'Intel Corporation'
device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
pcm0 at pci0:30:2: class=0x040100 card=0x201617c0 chip=0x266e8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW AC '97 Audio Controller'
class = multimedia
subclass = audio
none0 at pci0:30:3: class=0x070300 card=0x10ab17c0 chip=0x266d8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW AC '97 Modem Controller'
class = simple comms
subclass = generic modem
isab0 at pci0:31:0: class=0x060100 card=0x404517c0 chip=0x26418086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M LPC Interface Bridge'
class = bridge
subclass = PCI-ISA
atapci0 at pci0:31:2: class=0x010180 card=0x404217c0 chip=0x26538086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FBM ICH6M SATA Controller'
class = mass storage
subclass = ATA
none1 at pci0:31:3: class=0x0c0500 card=0x404117c0 chip=0x266a8086 rev=0x04 hdr=0x00
vendor = 'Intel Corporation'
device = '82801FB/FR/FW/FRW SMBus Controller'
class = serial bus
subclass = SMBus
none2 at pci1:0:0: class=0x030000 card=0x207317c0 chip=0x014810de rev=0xa2 hdr=0x00
vendor = 'NVIDIA Corporation'
class = display
subclass = VGA
iwi0 at pci6:5:0: class=0x028000 card=0x10018086 chip=0x42238086 rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'PRO/Wireless 2915ABG MiniPCI Adapter'
class = network
re0 at pci6:7:0: class=0x020000 card=0x109417c0 chip=0x816910ec rev=0x10 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8169 Gigabit Ethernet Adapter'
class = network
subclass = ethernet
none3 at pci6:9:0: class=0x060700 card=0x300717c0 chip=0x8031104c rev=0x00 hdr=0x02
vendor = 'Texas Instruments (TI)'
class = bridge
subclass = PCI-CardBus
none4 at pci6:9:2: class=0x0c0010 card=0x300717c0 chip=0x8032104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
class = serial bus
subclass = FireWire
none5 at pci6:9:3: class=0x018000 card=0x300717c0 chip=0x8033104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'PCIxx21 Integrated FlashMedia Controller'
class = mass storage
none6 at pci6:9:4: class=0x080500 card=0x300717c0 chip=0x8034104c rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
class = base peripheral
And here's dmesg -a:
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-STABLE #0: Wed Nov 16 15:42:49 EET 2005
roam at straylight.m.ringlet.net:/fs/5/usr.obj/fs/5/usr.src/sys/STRAYLIGHT
WARNING: WITNESS option enabled, expect reduced performance.
WARNING: DIAGNOSTIC option enabled, expect reduced performance.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) M processor 1.73GHz (1729.06-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6d8 Stepping = 8
Features=0xafe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
real memory = 1072562176 (1022 MB)
avail memory = 1040035840 (991 MB)
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD Wistron> on motherboard
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x17> port 0x66,0x62 on acpi0
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (4 Cx states)> on acpi0
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_perf0: <ACPI CPU Frequency Control> on cpu0
acpi_perf0: failed in PERF_STATUS attach
device_attach: acpi_perf0 attach returned 6
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 10 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 11 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci0: <serial bus, USB> at device 29.0 (no driver attached)
pci0: <serial bus, USB> at device 29.1 (no driver attached)
pci0: <serial bus, USB> at device 29.2 (no driver attached)
pci0: <serial bus, USB> at device 29.3 (no driver attached)
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
ACPI link \\_SB_.PCI0.LPCB.LNKG has invalid initial irq 10, ignoring
pci6: <ACPI PCI bus> on pcib3
pci6: <network> at device 5.0 (no driver attached)
re0: <RealTek 8169SB Single-chip Gigabit Ethernet> port 0x3000-0x30ff mem 0xb0007000-0xb00070ff irq 10 at device 7.0 on pci6
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S media interface> on miibus0
rgephy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto
re0: Ethernet address: 00:0a:e4:ab:65:9c
pci6: <bridge, PCI-CardBus> at device 9.0 (no driver attached)
pci6: <serial bus, FireWire> at device 9.2 (no driver attached)
pci6: <mass storage> at device 9.3 (no driver attached)
pci6: <base peripheral> at device 9.4 (no driver attached)
pcm0: <Intel ICH6 (82801FB)> port 0x1880-0x18bf,0x1c00-0x1cff mem 0x80000400-0x800004ff,0x80000800-0x800009ff irq 10 at device 30.2 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pci0: <simple comms, generic modem> at device 30.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH6 SATA150 controller> port 0x18e0-0x18ef,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
orm0: <ISA Option ROM> at iomem 0xd8000-0xdbfff on isa0
pmtimer0 on isa0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
Timecounter "TSC" frequency 1729056654 Hz quality 800
Timecounters tick every 10.000 msec
Expensive timeout(9) function: 0xc050c9e0(0) 0.003387860 s
ad0: 76319MB <HTS541080G9SA00/MB4OC60D> [155061/16/63] at ata0-master SATA150
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
ata1-slave: FAILURE - ATAPI_IDENTIFY timed out
acd0: DVDR <AOPEN DVD RW ISU8424E/1.10> at ata1-master PIO4
pass0 at ata1 bus 0 target 0 lun 0
pass0: <AOPEN DVD RW ISU8424E 1.10> Removable CD-ROM SCSI-0 device
pass0: 16.000MB/s transfers
Mounting root from ufs:/dev/ad0s1a
Pre-seeding PRNG:
kickstart
.
Loading configuration files.
Entropy harvesting:
interrupts
ethernet
point_to_point
kickstart
.
kernel dumps on /dev/ad0s2b
swapon: adding /dev/ad0s2b as swap device
Starting file system checks:
/dev/ad0s1a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s1a: clean, 157256 free (1272 frags, 19498 blocks, 0.5% fragmentation)
/dev/ad0s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2a: clean, 2164604 free (62524 frags, 262760 blocks, 0.5% fragmentation)
/dev/ad0s2d: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2d: clean, 186472 free (816 frags, 23207 blocks, 0.3% fragmentation)
/dev/ad0s2g: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2g: clean, 77319 free (1391 frags, 9491 blocks, 0.3% fragmentation)
/dev/ad0s2e: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2e: clean, 62199 free (175 frags, 7753 blocks, 0.1% fragmentation)
/dev/ad0s2h: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2h: clean, 30632 free (3760 frags, 3359 blocks, 0.7% fragmentation)
/dev/ad0s2f: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ad0s2f: clean, 154323 free (1515 frags, 19101 blocks, 0.6% fragmentation)
net.inet6.ip6.auto_linklocal:
1
->
0
net.inet6.ip6.v6only:
1
->
0
Setting hostname: straylight.m.ringlet.net.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet 127.0.0.2 netmask 0xffffffff
inet 192.168.1.13 netmask 0xffffff00
Starting dhclient.
Expensive timeout(9) function: 0xc05e8da0(0) 0.003527822 s
Expensive timeout(9) function: 0xc047a800(0xc235a000) 0.003799085 s
Script /etc/rc.d/dhclient interrupted
Additional routing options:
IP gateway=YES
.
Starting devd.
hw.acpi.cpu.cx_lowest:
C1
->
C1
dev.cpu.0.freq:
1734
->
1734
Mounting NFS file systems:
.
Starting syslogd.
Checking for core dump on /dev/ad0s2b...
savecore: no dumps found
Starting rpcbind.
NFS access cache time=2
ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/X11R6/lib /usr/local/lib
a.out ldconfig path: /usr/lib/aout /usr/lib/compat/aout /usr/X11R6/lib/aout
Starting mountd.
Starting nfsd.
Starting statd.
Starting lockd.
Starting usbd.
uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0x1800-0x181f irq 11 at device 29.0 on pci0
uhci0: LegSup = 0x1f30
usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0
usb0: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
uhci1: LegSup = 0x0f10
usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1
usb1: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0x1840-0x185f irq 11 at device 29.2 on pci0
uhci2: LegSup = 0x0f10
usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2
usb2: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0x1860-0x187f irq 11 at device 29.3 on pci0
uhci3: LegSup = 0x0f10
usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3
usb3: USB revision 1.0
usbd_get_string: getting lang failed, using 0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <EHCI (generic) USB 2.0 controller> mem 0x80000000-0x800003ff irq 11 at device 29.7 on pci0
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <EHCI (generic) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
Starting local daemons:
.
Starting ntpd.
Configuring syscons:
keymap
keyrate
alt_is_meta
font8x16
font8x14
font8x8
blanktime
screensaver
.
Starting sshd.
Initial i386 initialization:
.
Additional ABI support:
linux
/compat/linux/sbin/ldconfig:
Can't remove old temporary cache file /etc/ld.so.cache~
: Read-only file system
.
Starting cron.
Local package initialization:
Starting svscan.
tomcat41
Starting apache.
(skipping dictd.sh, not executable)
Setting the mixer cd from 100:100 to 100:100.
Setting the mixer pcm from 100:100 to 100:100.
Setting the mixer vol from 100:100 to 100:100.
Setting the mixer speaker from 0:0 to 0:0.
Starting mysql.
Starting SAMBA: removing stale tdbs :
Starting nmbd.
Starting smbd.
Starting stunnel.
.
Additional TCP options:
.
Starting moused:
mousechar_start
Expensive timeout(9) function: 0xc06045e0(0xc06e6a20) 0.010120637 s
.
Starting inetd.
Starting background file system checks in 60 seconds.
Fri Nov 25 14:35:46 CET 2005
G'luck,
Peter
--
Peter Pentchev roam at ringlet.net roam at cnsys.bg roam at FreeBSD.org
PGP key: http://people.FreeBSD.org/~roam/roam.key.asc
Key fingerprint FDBA FD79 C26F 3C51 C95E DF9E ED18 B68D 1619 4553
No language can express every thought unambiguously, least of all this one.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 187 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-mobile/attachments/20051125/90665702/attachment.bin
More information about the freebsd-mobile
mailing list