Broadcom wireless ndis 64 bit
Peter Carah
pete at altadena.net
Tue Nov 8 17:28:20 PST 2005
Since I noticed a bunch of ndis action, I tried again today...
I've tried two versions of Broadcom 64-bit drivers in my Compaq 2310, with the
same bad result from each (this is an improvement; the system used to crash on
kldload'ing the generated file...)
Using the driver found at linuxant.com:
(this one required adding a line to the .inf file describing the 4318)
---------------------------------------
pci0: driver added
found-> vendor=0x1002, dev=0x4372, revid=0x11
bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:20:0: reprobing on driver added
ichsmb0: <SMBus controller> port 0x8400-0x840f mem 0xc0003000-0xc00033ff at
device 20.0 on pci0
ichsmb0: can't map I/O
device_attach: ichsmb0 attach returned 6
found-> vendor=0x1002, dev=0x4370, revid=0x02
bus=0, slot=20, func=5
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
MSI supports 1 message
pci0:20:5: reprobing on driver added
found-> vendor=0x1002, dev=0x4378, revid=0x02
bus=0, slot=20, func=6
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
MSI supports 1 message
pci0:20:6: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x5955, revid=0x00
bus=1, slot=5, func=0found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=5, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=20
pci5:2:0: reprobing on driver added
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=5, slot=9, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pci5:9:3: reprobing on driver added
found-> vendor=0x104c, dev=0x8034, revid=0x00
bus=5, slot=9, func=4
class=08-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pci5:9:4: reprobing on driver added
pci0: driver added
found-> vendor=0x1002, dev=0x4372, revid=0x11
bus=0, slot=20, func=0
class=0c-05-00, hdrtype=0x00, mfdev=1
cmdreg=0x0003, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:20:0: reprobing on driver added
ichsmb0: <SMBus controller> port 0x8400-0x840f mem 0xc0003000-0xc00033ff at
device 20.0 on pci0
ichsmb0: can't map I/O
device_attach: ichsmb0 attach returned 6
found-> vendor=0x1002, dev=0x4370, revid=0x02
bus=0, slot=20, func=5
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
MSI supports 1 message
pci0:20:5: reprobing on driver added
found-> vendor=0x1002, dev=0x4378, revid=0x02
bus=0, slot=20, func=6
class=07-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0430, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
intpin=b, irq=17
MSI supports 1 message
pci0:20:6: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x5955, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
pci5: driver added
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=5, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=20
pci5:2:0: reprobing on driver added
ndis0: <Broadcom 802.11b/g WLAN> mem 0xc0204000-0xc0205fff irq 20 at device 2.0
on pci5
ndis0: Reserved 0x2000 bytes for rid 0x10 type 3 at 0xc0204000
ioapic0: routing intpin 20 (PCI IRQ 20) to vector 57
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ndis0: [GIANT-LOCKED]
ndis0: NDIS API version: 5.1
ndis0: NDIS ERROR: c000138d (unknown error)
ndis0: init handler failed
device_attach: ndis0 attach returned 6
----------------------------------------------------------------------------
and using the one found at acer support for the Ferarri 4000:
(already 4318)
----------------------------------------
pci0:20:6: reprobing on driver added
pci1: driver added
found-> vendor=0x1002, dev=0x5955, revid=0x00
bus=1, slot=5, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
pci1:5:0: reprobing on driver added
pci5: driver added
found-> vendor=0x14e4, dev=0x4318, revid=0x02
bus=5, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=20
pci5:2:0: reprobing on driver added
ndis0: <Broadcom 802.11g Network Adapter> mem 0xc0204000-0xc0205fff irq 20 at
device 2.0 on pci5
pcib2: ndis0 requested memory range 0xc0204000-0xc0205fff: good
ndis0: [GIANT-LOCKED]
ndis0: NDIS API version: 5.1
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
fpudna in kernel mode!
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
ntoskrnl dummy called...
.... LOTS of these ....ndis0: NDIS ERROR: c000138d (unknown error)
ndis0: init handler failed
device_attach: ndis0 attach returned 6
found-> vendor=0x104c, dev=0x8033, revid=0x00
bus=5, slot=9, func=3
class=01-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0006, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x07 (1750 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=17
powerspec 2 supports D0 D1 D2 D3 current D0
---------------------------------------------------------------------------------
-- Pete
More information about the freebsd-mobile
mailing list