WLI2-CB-G54L doesn't work

[Bill Paul]

> At Wed, 23 Mar 2005 09:17:01 +0900,
> Yoichi Nakayama wrote:
> > 
> > At Mon, 21 Mar 2005 19:44:44 +0900,
> > Yoichi Nakayama wrote:
> > > I invoked pciconf -l -v and it describes the card as
> > > none6 at pci1:0:0: class=0x020000 card=0x03341154 chip=0x222017fe rev=0x00 hdr=0x00
> > >     vendor   = 'InProComm Inc'
> > >     class    = network
> > >     subclass = ethernet
> > > 
> > > http://pciids.sourceforge.net/pci.ids saids
> > > 17fe  Linksys, A Division of Cisco Systems
> > >    2220  [AirConn] INPROCOMM IPN 2220 Wireless LAN Adapter (rev 01)
> > > 
> > > I noticed I have misthought that it has ath chip, and I looked at
> > >   http://buffalo.melcoinc.co.jp/download/driver/lan/wdrv.html (in Japanese)
> > > again. Then I found that I've wrongly looked at WLI-CB-AG54L spec instead
> > > of WLI2-CB-G54L which I have.
> > 
> > Then I tried ndis driver, but I got following panic on "ifconfig ndis0 up":
> > panic: _mtx_lock_sleep: recursed on non-recursive mutex ndis softc lock @ /usr/src/sys/modules/ndis/../../compat/ndis/kern_ndis.c:1463
> > It is caused by recursive lock introduced in if_ndis.c rev 1.82.
> 
> I've cvsup'ed current box yesterday and confirmed that
> the problem has gone. Thanks for the fix!
> -- 
> Yoichi NAKAYAMA

Does this mean your card actually works now with the NDISulator?
I haven't been able to get my hands on a NIC with an InProComm
chipset for testing yet, and nobody else has reported to me if
it works or not. If you can confirm that it works with Project Evil,
I would really appreciate it.

-Bill

--
=============================================================================
-Bill Paul            (510) 749-2329 | Senior Engineer, Master of Unix-Fu
                 wpaul at windriver.com | Wind River Systems
=============================================================================
              <adamw> you're just BEGGING to face the moose
=============================================================================