Inetl ProWireless 2200 iwi driver problem
Marcin Jessa
lists at yazzy.org
Tue Jun 14 09:01:53 GMT 2005
Hi James.
What kernel are you on?
1. At first glance it seems like you dont have NATing enabled.
Set up your 192.168.1.1 gw first.
If it's already in place :
2. Try to manually assign IP and default route to your nic.
See if that works.
If you're on CURRENT, that may be caused by the latest changes in network stuff.
I have the same nic and it works fine. But I configure it with my own script after boot:
http://www.yazzy.org/configs/freebsd/thinkpad/iwi.txt
Then I unload the module before I suspend my laptop, otherwise it can have problems resuming.
What do you have in your rc.conf ?
Cheers.
Marcin
On Tue, 14 Jun 2005 09:43:46 +0100 (BST)
James Feeder <jamesfeeder at yahoo.co.uk> wrote:
> Hello,
>
> I have recently bought a Inspiron 6000 laptop with an
> Intel ProWireless 2200. Everything seems to running
> fine but I am unable to access the internet via the
> wireless card. It can ping the router and other
> computers on the network but fails to ping anything
> outside the router. I have set the defaultrouter in
> rc.conf and the wireless card seems to be configured
> correctly when I run ifconfig. Here is some output
> from my laptop which will hopefully be of some use:
>
> # ping -c5 192.168.1.1
> PING 192.168.1.1 (192.168.1.1): 56 data bytes
> 64 bytes from 192.168.1.1: icmp_seq=0 ttl=254
> time=4.132 ms
> 64 bytes from 192.168.1.1: icmp_seq=1 ttl=254
> time=3.603 ms
> 64 bytes from 192.168.1.1: icmp_seq=2 ttl=254
> time=3.874 ms
> 64 bytes from 192.168.1.1: icmp_seq=3 ttl=254
> time=3.985 ms
> 64 bytes from 192.168.1.1: icmp_seq=4 ttl=254
> time=3.814 ms
>
> --- 192.168.1.1 ping statistics ---
> 5 packets transmitted, 5 packets received, 0% packet
> loss
> round-trip min/avg/max/stddev =
> 3.603/3.882/4.132/0.176 ms
>
> # ping -c5 www.google.com
> PING www.l.google.com (66.249.87.99): 56 data bytes
> ping: sendto: No route to host
> ping: sendto: No route to host
> ping: sendto: No route to host
> ping: sendto: No route to host
> ping: sendto: No route to host
>
> --- www.l.google.com ping statistics ---
> 5 packets transmitted, 0 packets received, 100% packet
> loss
>
> # ifconfig
> bfe0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> options=8<VLAN_MTU>
> ether aa:aa:aa:aa:aa:aa
> media: Ethernet autoselect (none)
> status: no carrier
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
> 16384
> inet 127.0.0.1 netmask 0xff000000
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2
> iwi0:
> flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
> 1500
> inet 192.168.1.100 netmask 0xffffff00
> broadcast 192.168.1.255
> inet6 fe80::xxx:xxxx:xxxx:xxxx%iwi0 prefixlen
> 64 scopeid 0x3
> ether bb:bb:bb:bb:bb:bb
> media: IEEE 802.11 Wireless Ethernet
> autoselect (DS/5.5Mbps)
> status: associated
> ssid baz 1:baz
> channel 11 authmode OPEN powersavemode OFF
> powersavesleep 100
> rtsthreshold 2312 protmode CTS txpower 100
> wepmode OFF weptxkey 1
>
> # netstat -rn
> Routing tables
>
> Internet:
> Destination Gateway Flags Refs
> Use Netif Expire
> 127.0.0.1 127.0.0.1 UH 0
> 0 lo0
> 192.168.1 link#3 UC 0
> 0 iwi0
> 192.168.1.1 00:06:25:1a:c9:4e UHLW 0
> 28 iwi0 1027
> 192.168.1.100 bb:bb:bb:bb:bb:bb UHLW 0
> 2 lo0
>
> Internet6:
> Destination Gateway
> Flags Netif
> Expire
> ::1 ::1
> UH lo0
> fe80::%lo0/64 fe80::1%lo0
> U lo0
> fe80::1%lo0 link#2
> UHL lo0
> fe80::%iwi0/64 link#3
> UC iwi0
> fe80::xxx:xxxx:xxxx:xxxx%iwi0 bb:bb:bb:bb:bb:bb
> UHL lo0
> ff01::/32 ::1
> U lo0
> ff02::%lo0/32 ::1
> UC lo0
> ff02::%iwi0/32 link#3
> UC iwi0
>
> Spacings may be a bit strange above, if you would like
> it as an attachment just ask :)
>
> Thanks,
>
> James Feeder
>
>
>
> ___________________________________________________________
> How much free photo storage do you get? Store your holiday
> snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
More information about the freebsd-mobile
mailing list