FreeBSD6, FSC Lifebook E8010, Xorg
Marcin Jessa
lists at yazzy.org
Wed Jul 20 19:55:47 GMT 2005
Hi Rainer, guys.
I have the same problem on my Thinkpad R50e where they used exactly the same graphic card.
X-video does not work since it cannot detect my card as agp device.
I tried the module, tried to compile it into the kernel on both 6.0 and 7.0 with no luck...
Cheers,
Marcin Jessa
On Wed, 20 Jul 2005 14:19:24 +0200
Rainer Duffner <rainer at ultra-secure.de> wrote:
> amp wrote:
>
> > You can try by issuing:
> >
> > shell# kldload agp
> >
> > (check your ttyv0 console or /var/log/messages for some info)
> >
> > If it OK, you can use the agp module by putting *agp_load="YES"* on
> > /boot/loader.conf
> > or recompile the kernel back by inserting *device agp* on your kernel
> > configuration.
> >
> >
>
>
> OK,
>
> as I said, I tried both agp in the config-file and in loader.conf - but
> no change.
>
> As you can see from the following, it doesn't detect my i855 integrated
> graphics controller, which I assume it should.
>
>
> this is the kernel-configuration:
>
> machine i386
> cpu I686_CPU
> ident LBE
> options SCHED_4BSD # 4BSD scheduler
> options PREEMPTION # Enable kernel thread preemption
> options INET # InterNETworking
> options INET6 # IPv6 communications protocols
> options FFS # Berkeley Fast Filesystem
> options SOFTUPDATES # Enable FFS soft updates support
> options UFS_ACL # Support for access control lists
> options UFS_DIRHASH # Improve performance on big
> directoriesoptions MD_ROOT # MD is a potential
> root device
> options NFSCLIENT # Network Filesystem Client
> options NFSSERVER # Network Filesystem Server
> options NFS_ROOT # NFS usable as /, requires
> NFSCLIENT
> options MSDOSFS # MSDOS Filesystem
> options CD9660 # ISO 9660 Filesystem
> options PROCFS # Process filesystem (requires
> PSEUDOFS)options PSEUDOFS # Pseudo-filesystem
> framework
> options GEOM_GPT # GUID Partition Tables.
> options COMPAT_43 # Compatible with BSD 4.3 [KEEP
> THIS!]
> options COMPAT_FREEBSD4 # Compatible with FreeBSD4
> options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
> options KTRACE # ktrace(1) support
> options SYSVSHM # SYSV-style shared memory
> options SYSVMSG # SYSV-style message queues
> options SYSVSEM # SYSV-style semaphores
> options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time
> extensions
> options KBD_INSTALL_CDEV # install a CDEV entry in /dev
> options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~128k to driver.
> options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
> # output. Adds ~215k to driver.
> options ADAPTIVE_GIANT # Giant mutex is adaptive.
> device isa
> device pci
> device fdc
> device ata
> device atadisk # ATA disk drives
> device ataraid # ATA RAID drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID # Static device numbering
> device atapicam
> device scbus # SCSI bus (required for SCSI)
> device ch # SCSI media changers
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device cd # CD
> device pass # Passthrough device (direct SCSI access)
> device ses # SCSI Environmental Services (and SAF-TE)
> device atkbdc # AT keyboard controller
> device atkbd # AT keyboard
> device psm # PS/2 mouse
> device vga # VGA video card driver
> device splash # Splash screen and screen saver support
> device sc
> device npx
> device pmtimer
> device cbb # cardbus (yenta) bridge
> device pccard # PC Card (16-bit) bus
> device cardbus # CardBus (32-bit) bus
> device sio # 8250, 16[45]50 based serial ports
> device ppc
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device miibus # MII bus support
> device bge # Broadcom BCM570xx Gigabit Ethernet
> device wlan # 802.11 support
> device an # Aironet 4500/4800 802.11 wireless NICs.
> device awi # BayStack 660 and others
> device ral # Ralink Technology RT2500 wireless NICs.
> device wi # WaveLAN/Intersil/Symbol 802.11
> wireless NICs.
> device iwi
> device loop # Network loopback
> device mem # Memory and kernel memory devices
> device io # I/O device
> device random # Entropy device
> device ether # Ethernet support
> device tun # Packet tunnel.
> device pty # Pseudo-ttys (telnet etc)
> device md # Memory "disks"
> device gif # IPv6 and IPv4 tunneling
> device faith # IPv6-to-IPv4 relaying (translation)
> device bpf # Berkeley packet filter
> device uhci # UHCI PCI->USB interface
> device ohci # OHCI PCI->USB interface
> device ehci # EHCI PCI->USB interface (USB 2.0)
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus and da
> device ums # Mouse
> device ural # Ralink Technology RT2500USB wireless NICs
> device urio # Diamond Rio 500 MP3 player
> device uscanner # Scanners
> device firewire # FireWire bus code
> device sbp # SCSI over FireWire (Requires scbus and da)
>
>
> That's my loader.conf:
> lbe# cat /boot/loader.conf
> agp_load="YES"
> snd_ich_load="YES"
> acpi_fujitsu_load="YES"
> cpufreq_load="YES"
> acpi_video_load="YES"
> smbus_load="YES"
> iicsmb_load="YES"
> bktr_load="YES"
>
>
> That's what I get from a dmesg:
>
> Copyright (c) 1992-2005 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 6.0-BETA1 #2: Wed Jul 20 13:49:44 CEST 2005
> root at lbe.example.org:/usr/obj/usr/src/sys/LBE
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Pentium(R) M processor 1.60GHz (1600.06-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x6d6 Stepping = 6
>
> Features=0xafe9f9bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,PBE>
> Features2=0x180<EST,TM2>
> real memory = 527368192 (502 MB)
> avail memory = 506732544 (483 MB)
> bktr_mem: memory holder loaded
> npx0: [FAST]
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> acpi0: <FUJ FJNB185> on motherboard
> acpi0: Power Button (fixed)
> pci_link0: <ACPI PCI Link LNKA> irq 11 on acpi0
> pci_link1: <ACPI PCI Link LNKB> irq 11 on acpi0
> pci_link2: <ACPI PCI Link LNKC> irq 11 on acpi0
> pci_link3: <ACPI PCI Link LNKD> irq 11 on acpi0
> pci_link4: <ACPI PCI Link LNKE> irq 11 on acpi0
> pci_link5: <ACPI PCI Link LNKF> irq 11 on acpi0
> pci_link6: <ACPI PCI Link LNKG> irq 0 on acpi0
> pci_link7: <ACPI PCI Link LNKH> irq 11 on acpi0
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xfc08-0xfc0b on acpi0
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pci0: <base peripheral> at device 0.1 (no driver attached)
> pci0: <base peripheral> at device 0.3 (no driver attached)
> acpi_video0: <ACPI video extension> port 0x1800-0x1807 mem
> 0xd8000000-0xdfffffff,0xd0000000-0xd007ffff irq 11 at device 2.0 on pci0
> pci0: <display> at device 2.1 (no driver attached)
> uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1820-0x183f
> irq 11 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1840-0x185f
> irq 11 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0x1860-0x187f
> irq 11 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> mem
> 0xd0100000-0xd01003ff irq 11 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> usb3: EHCI version 1.0
> usb3: companion controllers, 2 ports each: usb0 usb1 usb2
> usb3: <Intel 82801DB/DBL/DBM (ICH4) USB 2.0 controller> on ehci0
> usb3: USB revision 2.0
> uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub3: 6 ports with 6 removable, self powered
> pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> cbb0: <PCI-CardBus Bridge> irq 11 at device 10.0 on pci1
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> cbb1: <PCI-CardBus Bridge> irq 11 at device 10.1 on pci1
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pci1: <base peripheral> at device 10.2 (no driver attached)
> cbb2: <PCI-CardBus Bridge> at device 10.3 on pci1
> cardbus2: <CardBus bus> on cbb2
> pccard2: <16-bit PCCard bus> on cbb2
> bge0: <Broadcom BCM5705M Gigabit Ethernet, ASIC rev. 0x3003> mem
> 0xd0200000-0xd020ffff irq 11 at device 12.0 on pci1
> miibus0: <MII bus> on bge0
> brgphy0: <BCM5705 10/100/1000baseTX PHY> on miibus0
> brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,
> 1000baseTX-FDX, auto
> bge0: Ethernet address: 00:0b:5d:4c:4e:b9
> iwi0: <Intel(R) PRO/Wireless 2200BG> mem 0xd0215000-0xd0215fff irq 11 at
> device 13.0 on pci1
> iwi0: Ethernet address: 00:0e:35:28:4e:18
> fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem
> 0xd0216000-0xd02167ff,0xd0210000-0xd0213fff irq 11 at device 14.0 on pci1
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:00:0e:10:02:90:a7:76
> fwohci0: Phy 1394a available S400, 1 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> fwohci0: Initiate bus reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH4 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1810-0x181f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata1: <ATA channel 1> on atapci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pcm0: <Intel ICH4 (82801DB)> port 0x1c00-0x1cff,0x18c0-0x18ff mem
> 0xd0100c00-0xd0100dff,0xd0100800-0xd01008ff irq 11 at device 31.5 on pci0
> pcm0: [GIANT-LOCKED]
> pcm0: <Unknown AC97 Codec (id = 0x414c4770)>
> pci0: <simple comms, generic modem> at device 31.6 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> acpi_cmbat0: <Control Method Battery> on acpi0
> acpi_cmbat1: <Control Method Battery> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio1 port 0x2e8-0x2ef,0x400-0x43f irq 3 drq 3 on acpi0
> sio1: type 16550A
> ppc0: <Standard parallel printer port> port 0x378-0x37f,0x778-0x77b irq
> 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> acpi_fujitsu0: <Fujitsu Function Buttons> on acpi0
> acpi_fujitsu0: Couldn't query volume level
> acpi_fujitsu0: Couldn't init button states
> acpi_fujitsu0: Couldn't initialize button states!
> pmtimer0 on isa0
> orm0: <ISA Option ROM> at iomem 0xdc000-0xdffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounter "TSC" frequency 1600062995 Hz quality 800
> Timecounters tick every 1.000 msec
> ad0: 38154MB <Seagate ST94019A 3.05> at ata0-master UDMA100
> acd0: CDRW <TOSHIBA DVD-ROM SD-R2512/1F20> at ata1-master UDMA33
> ATA PseudoRAID loaded
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <TOSHIBA DVD-ROM SD-R2512 1F20> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad0s1a
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
> acpi_fujitsu0: Couldn't query method
>
>
> And that's what pciconf -lv says:
> hostb0 at pci0:0:0: class=0x060000 card=0x11d510cf chip=0x35808086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82852GM/GME/GMV/PM, 855GM/GME Montara Host-Hub Interface
> Bridge' class = bridge
> subclass = HOST-PCI
> none0 at pci0:0:1: class=0x088000 card=0x11d510cf chip=0x35848086 rev=0x02
> hdr=0x00 vendor = 'Intel Corporation'
> device = '82852GM/GME/GMV/PM, 855GM/GME Montara System Memory
> Controller'
> class = base peripheral
> none1 at pci0:0:3: class=0x088000 card=0x11d510cf chip=0x35858086 rev=0x02
> hdr=0x00 vendor = 'Intel Corporation'
> device = '82852GM/GME/GMV/PM, 855GM/GME Montara Configuration Process'
> class = base peripheral
> acpi_video0 at pci0:2:0: class=0x030000 card=0x128110cf chip=0x35828086
> rev=0x02 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated
> Graphics Device'
> class = display
> subclass = VGA
> none2 at pci0:2:1: class=0x038000 card=0x128110cf chip=0x35828086 rev=0x02
> hdr=0x00 vendor = 'Intel Corporation'
> device = '82852GM/GME/GMV/PM, 855GM/GME Montara Integrated
> Graphics Device'
> class = display
> uhci0 at pci0:29:0: class=0x0c0300 card=0x11ab10cf chip=0x24c28086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1'
> class = serial bus
> subclass = USB
> uhci1 at pci0:29:1: class=0x0c0300 card=0x11ab10cf chip=0x24c48086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2'
> class = serial bus
> subclass = USB
> uhci2 at pci0:29:2: class=0x0c0300 card=0x11ab10cf chip=0x24c78086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3'
> class = serial bus
> subclass = USB
> ehci0 at pci0:29:7: class=0x0c0320 card=0x11ab10cf chip=0x24cd8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB 2.0 EHCI
> Controller'
> class = serial bus
> subclass = USB
> pcib1 at pci0:30:0: class=0x060400 card=0x00000000 chip=0x24488086
> rev=0x83 hdr=0x01
> vendor = 'Intel Corporation'
> device = '82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI
> Bridge'
> class = bridge
> subclass = PCI-PCI
> isab0 at pci0:31:0: class=0x060100 card=0x00000000 chip=0x24cc8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DBM (ICH4-M) LPC Interface Bridge'
> class = bridge
> subclass = PCI-ISA
> atapci0 at pci0:31:1: class=0x01018a card=0x11ab10cf chip=0x24ca8086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DBM (ICH4-M) UltraATA/100 EIDE Controller'
> class = mass storage
> subclass = ATA
> none3 at pci0:31:3: class=0x0c0500 card=0x11ab10cf chip=0x24c38086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller'
> class = serial bus
> subclass = SMBus
> pcm0 at pci0:31:5: class=0x040100 card=0x127d10cf chip=0x24c58086 rev=0x03
> hdr=0x00 vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller'
> class = multimedia
> subclass = audio
> none4 at pci0:31:6: class=0x070300 card=0x10d110cf chip=0x24c68086
> rev=0x03 hdr=0x00
> vendor = 'Intel Corporation'
> device = '82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller'
> class = simple comms
> subclass = generic modem
> cbb0 at pci1:10:0: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00
> hdr=0x02 vendor = 'O2 Micro Inc'
> device = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
> class = bridge
> subclass = PCI-CardBus
> cbb1 at pci1:10:1: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00
> hdr=0x02 vendor = 'O2 Micro Inc'
> device = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
> class = bridge
> subclass = PCI-CardBus
> none5 at pci1:10:2: class=0x088000 card=0x11c410cf chip=0x71101217
> rev=0x00 hdr=0x00
> vendor = 'O2 Micro Inc'
> device = 'OZ711Mx MemoryCardBus Accelerator'
> class = base peripheral
> cbb2 at pci1:10:3: class=0x060700 card=0x11c410cf chip=0x72231217 rev=0x00
> hdr=0x02 vendor = 'O2 Micro Inc'
> device = 'OZ711M3 SmartCardBus MultiMediaBay Controller'
> class = bridge
> subclass = PCI-CardBus
> bge0 at pci1:12:0: class=0x020000 card=0x127910cf chip=0x165e14e4 rev=0x03
> hdr=0x00 vendor = 'Broadcom Corporation'
> device = 'BCM5705MA2 NetXtreme Gigabit Ethernet'
> class = network
> subclass = ethernet
> iwi0 at pci1:13:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05
> hdr=0x00 vendor = 'Intel Corporation'
> device = 'PRO/Wireless 2200BG Network Connection'
> class = network
> fwohci0 at pci1:14:0: class=0x0c0010 card=0x116210cf chip=0x8026104c
> rev=0x00 hdr=0x00
> vendor = 'Texas Instruments (TI)'
> device = 'TSB43AB21 1394a-2000 OHCI PHY/link-layer Controller'
> class = serial bus
> subclass = FireWire
>
> _______________________________________________
> freebsd-current at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-current
> To unsubscribe, send any mail to "freebsd-current-unsubscribe at freebsd.org"
More information about the freebsd-mobile
mailing list