PCMCIA issues
Giuseppe Argentieri
giuseppe.argentieri at spiro.fisica.unipd.it
Tue Jul 5 14:21:32 GMT 2005
Hi all,
I have problems with cardbus on my laptop running FreeBSD 5.4
Sometimes I get "Bad vcc request" errors and sometimes not. In any case
the slot doesn't work and my Prism2.5 wireless card is not detected.
Googling around I found that some people solved these issues passing
opportune values in /boot/loader.conf
I tried many combinations changing hw.cbb.start_memory,
hw.pci.enable_io_modes=1, hw.acpi.host_mem_start, etc. with no success.
I tried the latest 6.0-CURRENT snapshot, too. But nothing.
This is the 5.4 verbose dmesg (I don't know why first part of
/var/run/dmesg.boot has been cut away):
bios32: Entry = 0xe89f0 (c00e89f0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xe6000+0x2a04
pnpbios: Found PnP BIOS data at 0xc00ff020
pnpbios: Entry = ea000:40a2 Rev = 1.0
pnpbios: Event flag at ea01e
pnpbios: OEM ID 8224744e
Other BIOS signatures found:
crypto: <crypto core>
wlan: <802.11 Link Layer>
null: <null device, zero device>
io: <I/O>
random: <entropy source, Software, Yarrow>
VESA: information block
56 45 53 41 00 03 6f 0e 00 c0 01 00 00 00 22 00
00 01 ef 01 00 02 8a 87 00 c0 a4 87 00 c0 ac 87
00 c0 2e 01 0e 01 0f 01 31 01 33 01 34 01 41 01
43 01 44 01 51 01 53 01 54 01 00 01 1d 01 1e 01
VESA: 40 mode(s) found
VESA: v3.0, 31680k memory, flags:0x1, mode table:0xc08f46e2 (1000022)
VESA: S3 Graphics ProSavage DDR Family BIOS
VESA: S3 Garphics Incorporated. VBE 3.0 Rev 0.0
mem: <memory>
netsmb_dev: loaded
splash: image at 0xc08f587c, size:787510
splash_bmp: beyond screen capacity (1024x768, 256 colors)
splash_bmp: beyond screen capacity (1024x768, 256 colors)
bmp_start(): splash_mode:261
splash: image decoder found: splash_bmp
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <INSYDE RSDT_000> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31561106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fe840
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 16 A 0x01 3 5 7 9 10 11
embedded 0 16 B 0x02 3 5 7 9 10 11
embedded 0 16 C 0x03 3 5 7 9 10 11
embedded 0 16 D 0x05 3 5 7 9 10 11
embedded 0 17 C 0x03 3 5 7 9 10 11
embedded 0 17 D 0x05 3 5 7 9 10 11
embedded 0 18 A 0x01 3 5 7 9 10 11
embedded 0 12 A 0x03 3 5 7 9 10 11
slot 1 0 10 A 0x05 3 5 7 9 10 11
embedded 1 0 A 0x01 3 5 7 9 10 11
embedded 1 0 B 0x02 3 5 7 9 10 11
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
acpi_ec0: <Embedded Controller: GPE 0x1> port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 80 us
acpi_ec0: info: new max delay is 310 us
acpi_ec0: info: new max delay is 340 us
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU (2 Cx states)> on acpi0
powernow0: <PowerNow! K7> on cpu0
powernow0: STATUS: 0xb0b0b00150615
powernow0: STATUS: maxfid: 0x15
powernow0: STATUS: startvid: 0x0b
powernow: 0 1782000kHz FID 15 VID 0b
powernow: 1 1584000kHz FID 02 VID 0c
powernow: 2 1320000kHz FID 0e VID 0e
powernow: 3 1056000kHz FID 0a VID 0e
powernow: 4 792000kHz FID 06 VID 0e
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKD irq 0: [ 3 4 5 7 10 11 14 15] 0+ low,level,sharable 0.10.0
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 10 11 14 15] 5+ low,level,sharable 0.12.0
\\_SB_.PCI0.LNKA irq 0: [ 3 4 5 7 10 11 14 15] 11+ low,level,sharable 0.16.0
\\_SB_.PCI0.LNKB irq 0: [ 3 4 5 7 10 11 14 15] 10+ low,level,sharable 0.16.1
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 10 11 14 15] 5+ low,level,sharable 0.16.2
\\_SB_.PCI0.LNKD irq 0: [ 3 4 5 7 10 11 14 15] 0+ low,level,sharable 0.16.3
\\_SB_.PCI0.LNKC irq 0: [ 3 4 5 7 10 11 14 15] 5+ low,level,sharable 0.17.2
\\_SB_.PCI0.LNKD irq 0: [ 3 4 5 7 10 11 14 15] 0+ low,level,sharable 0.17.3
\\_SB_.PCI0.LNKA irq 0: [ 3 4 5 7 10 11 14 15] 11+ low,level,sharable 0.18.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base b0000000, size 27, enabled
found-> vendor=0x1106, dev=0x3156, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb091, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base 0c000000, size 12, enabled
pcib0: matched entry for 0.10.INTA (src \\_SB_.PCI0.LNKD)
pcib0: possible interrupts: 3 4 5 7 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKD (references 3, priority 43413):
interrupts: 11 10 5 7 4 3 15 14
penalty: 90 90 140 5090 5090 5090 50090 50090
\\_SB_.PCI0.LNKC (references 3, priority 43413):
interrupts: 11 10 5 7 4 3 15 14
penalty: 90 90 140 5090 5090 5090 50090 50090
\\_SB_.PCI0.LNKA (references 2, priority 28942):
interrupts: 11 10 5 7 4 3 15 14
penalty: 90 90 140 5090 5090 5090 50090 50090
\\_SB_.PCI0.LNKB (references 1, priority 14471):
interrupts: 11 10 5 7 4 3 15 14
penalty: 90 90 140 5090 5090 5090 50090 50090
pcib0: slot 10 INTA routed to irq 11 via \\_SB_.PCI0.LNKD
found-> vendor=0x1217, dev=0x6972, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0087, statreg=0x0410, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0xc0 (48000 ns), maxlat=0x05 (1250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f0000000, size 11, enabled
map[14]: type 1, range 32, base f0004000, size 14, enabled
pcib0: matched entry for 0.12.INTA (src \\_SB_.PCI0.LNKC)
pcib0: possible interrupts: 3 4 5 7 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKC (references 3, priority 43695):
interrupts: 10 11 5 7 4 3 15 14
penalty: 180 210 230 5180 5180 5180 50180 50180
\\_SB_.PCI0.LNKA (references 2, priority 29130):
interrupts: 10 11 5 7 4 3 15 14
penalty: 180 210 230 5180 5180 5180 50180 50180
\\_SB_.PCI0.LNKB (references 1, priority 14565):
interrupts: 10 11 5 7 4 3 15 14
penalty: 180 210 230 5180 5180 5180 50180 50180
pcib0: slot 12 INTA routed to irq 5 via \\_SB_.PCI0.LNKC
found-> vendor=0x104c, dev=0x8026, revid=0x00
bus=0, slot=12, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001200, size 5, enabled
pcib0: matched entry for 0.16.INTA (src \\_SB_.PCI0.LNKA)
pcib0: possible interrupts: 3 4 5 7 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKA (references 2, priority 29317):
interrupts: 10 11 5 7 4 3 15 14
penalty: 270 300 350 5270 5270 5270 50270 50270
\\_SB_.PCI0.LNKB (references 1, priority 14658):
interrupts: 10 11 5 7 4 3 15 14
penalty: 270 300 350 5270 5270 5270 50270 50270
pcib0: slot 16 INTA routed to irq 11 via \\_SB_.PCI0.LNKA
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[20]: type 4, range 32, base 00001300, size 5, enabled
found-> vendor=0x1106, dev=0x3038, revid=0x80
bus=0, slot=16, func=1
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x16 (660 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base f4000000, size 8, enabled
pcib0: matched entry for 0.16.INTD (src \\_SB_.PCI0.LNKD)
pcib0: slot 16 INTD is already routed to irq 11
found-> vendor=0x1106, dev=0x3104, revid=0x82
bus=0, slot=16, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
found-> vendor=0x1106, dev=0x3177, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x008f, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 00001100, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=17, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000e000, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC)
pcib0: slot 17 INTC is already routed to irq 5
found-> vendor=0x1106, dev=0x3059, revid=0x50
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e100, size 8, enabled
pcib0: matched entry for 0.17.INTC (src \\_SB_.PCI0.LNKC)
pcib0: slot 17 INTC is already routed to irq 5
found-> vendor=0x1106, dev=0x3068, revid=0x80
bus=0, slot=17, func=6
class=07-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000e200, size 8, enabled
map[14]: type 1, range 32, base f0008000, size 8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.LNKA)
pcib0: slot 18 INTA is already routed to irq 11
found-> vendor=0x1106, dev=0x3065, revid=0x74
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x0210, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA XN266 (Apollo Pro266) host to PCI bridge> mem 0xb0000000-0xb7ffffff at device 0.0 on pci0
agp0: Reserved 0x8000000 bytes for rid 0x10 type 3 at 0xb0000000
agp0: allocating GATT for aperture of size 256M
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xdfff
pcib1: memory decode 0xe0000000-0xefffffff
pcib1: prefetched decode 0xa0000000-0xafffffff
ACPI PCI link initial configuration:
\\_SB_.PCI0.LNKA irq*11: [ 3 4 5 7 10 11 14 15] 11+ low,level,sharable 1.0.0
\\_SB_.PCI0.LNKB irq 0: [ 3 4 5 7 10 11 14 15] 10+ low,level,sharable 1.0.1
pci1: <ACPI PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base e0080000, size 19, enabled
pcib1: device (null) requested decoded memory range 0xe0080000-0xe00fffff
map[14]: type 3, range 32, base a8000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xa8000000-0xafffffff
pcib1: matched entry for 1.0.INTA (src \\_SB_.PCI0.LNKA)
pcib1: slot 0 INTA is already routed to irq 11
found-> vendor=0x5333, dev=0x8d04, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0230, cachelnsz=4 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
acpi_video0: <ACPI video extension> mem 0xa8000000-0xafffffff,0xe0080000-0xe00fffff irq 11 at device 0.0 on pci1
found LCD panel(110), detectable by BIOS, head #0
found CRT monitor(100), detectable by BIOS, head #0
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> mem 0xc000000-0xc000fff irq 11 at device 10.0 on pci0
cbb0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xc000000
cbb0: Found memory at 0c000000
cbb0: Secondary bus is 2
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: cbb_power: 0V
cbb0: bad Vcc request. ctrl=0xff0088, status=0xffffffff
cbb_power: 0V
cbb0: PCI Configuration space:
0x00: 0x69721217 0x04100087 0x06070000 0x00022000
0x10: 0x0c000000 0x020000a0 0x20020200 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffd
0x30: 0x00000001 0x0000fffd 0x00000001 0x0540010b
0x40: 0x10e710cf 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00000000 0x00000000 0x00000000 0x088c1882
0x90: 0x00000002 0x00000000 0x00000000 0x00000000
0xa0: 0xfe020001 0x00c04000 0x00000000 0x00000015
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00000000 0x00000000 0x00000000 0x00000000
0xd0: 0x08004000 0x028203ea 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: <Texas Instruments TSB43AB21/A/AI/A-EP> mem 0xf0004000-0xf0007fff,0xf0000000-0xf00007ff irq 5 at device 12.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xf0000000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:c0:9f:00:00:04:08:79
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:c0:9f:04:08:79
fwe0: bpf attached
fwe0: Ethernet address: 02:c0:9f:04:08:79
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
uhci0: <VIA 83C572 USB controller> port 0x1200-0x121f irq 11 at device 16.0 on pci0
uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1200
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0x1300-0x131f at device 16.1 on pci0
uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0x1300
pcib0: matched entry for 0.16.INTB (src \\_SB_.PCI0.LNKB)
pcib0: possible interrupts: 3 4 5 7 10 11 14 15
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.LNKB (references 2, priority 29547):
interrupts: 10 11 5 7 4 3 15 14
penalty: 360 500 530 5360 5360 5360 50360 50360
pcib0: slot 16 INTB routed to irq 10 via \\_SB_.PCI0.LNKB
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 16.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 8235 UDMA133 controller> port 0x1100-0x110f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 17.1 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x1100
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata1: [MPSAFE]
pci0: <multimedia, audio> at device 17.5 (no driver attached)
pci0: <simple comms> at device 17.6 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xe200-0xe2ff mem 0xf0008000-0xf00080ff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe200
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x0005be, model 0x0004, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:c0:9f:22:29:f0
vr0: [GIANT-LOCKED]
acpi_tz0: <Thermal Zone> on acpi0
speaker0: <PC speaker> port 0x67,0x65,0x63,0x61 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 006f
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: unable to allocate IRQ
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
psm0: current command byte:006f
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model GlidePoint, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000008, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 73
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 1/0/0 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
vpo0: can't connect to the drive
imm0: (disconnect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
imm0: (connect) s1=0x38 s2=0x38, s3=0x38
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
ppc: ppc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
vt: vt0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xea000-0xeefff,0xc0000-0xcdfff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x221 0x221 0x221 0x221
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 11 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x221 0x221 0x221 0x221
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 11 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:261
fb0: window:0xdc342000 size:31680k gran:31680k, buf:0xdc342000 size:31680k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1791226861 Hz quality 800
Timecounters tick every 1.000 msec
IPv6 packet filtering initialized, unlimited logging
crypto: <crypto device>
crypto: assign driver 0, flags 6
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
Linux ELF exec handler installed
IPsec: Initialized Security Association Processing.
IP Filter: v3.4.35 initialized. Default = pass all, Logging = enabled
pflog0: bpf attached
lo0: bpf attached
pfsync0: bpf attached
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging unlimited
acpi_ec0: info: new max delay is 350 us
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: critically low charge!
Status is 0xffffffff
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8235 chip
ata0-master: setting UDMA100 on VIA 8235 chip
ad0: <IC25N040ATCS04-0/CA4OA71A> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on VIA 8235 chip
acd0: <QSI CD-RW/DVD-ROM SBW-242/UX08> CDRW drive at ata1 as master
acd0: read 2064KB/s (4126KB/s) write 4126KB/s (4126KB/s), 2048KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes: CDR, CDRW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
GEOM: new disk ad0
[0] f:00 typ:166 s(CHS):0/1/1 e(CHS):647/254/63 s:63 l:10410057
[1] f:80 typ:165 s(CHS):648/0/1 e(CHS):1023/254/63 s:10410120 l:14329980
[2] f:00 typ:169 s(CHS):1023/0/1 e(CHS):1023/254/63 s:24740100 l:10410120
[3] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:35150220 l:42989940
GEOM: Configure ad0s1, start 32256 length 5329949184 end 5329981439
GEOM: Configure ad0s2, start 5329981440 length 7336949760 end 12666931199
GEOM: Configure ad0s3, start 12666931200 length 5329981440 end 17996912639
GEOM: Configure ad0s4, start 17996912640 length 22010849280 end 40007761919
[0] f:08 typ:232 s(CHS):270/192/52 e(CHS):235/2/0 s:246698998 l:-851190991
[1] f:10 typ:1 s(CHS):821/91/3 e(CHS):32/16/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):367/33/12 s:1852400737 l:168624231
[3] f:45 typ:63 s(CHS):288/82/18 e(CHS):0/13/10 s:0 l:0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad0s2a, start 0 length 157286400 end 157286399
GEOM: Configure ad0s2b, start 157286400 length 268435456 end 425721855
GEOM: Configure ad0s2c, start 0 length 7336949760 end 7336949759
GEOM: Configure ad0s2d, start 425721856 length 524288000 end 950009855
GEOM: Configure ad0s2e, start 950009856 length 1048576000 end 1998585855
GEOM: Configure ad0s2f, start 1998585856 length 5338363904 end 7336949759
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MBREXT Slice 5 on ad0s4:
[0] f:00 typ:130 s(CHS):0/1/1 e(CHS):30/254/63 s:63 l:497952
[1] f:00 typ:5 s(CHS):31/0/1 e(CHS):127/254/63 s:498015 l:1558305
GEOM: Configure ad0s5, start 32256 length 254951424 end 254983679
MBREXT Slice 6 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):96/254/63 s:63 l:1558242
[1] f:00 typ:5 s(CHS):128/0/1 e(CHS):1023/254/63 s:2056320 l:15631245
GEOM: Configure ad0s6, start 255015936 length 797819904 end 1052835839
MBREXT Slice 7 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):972/254/63 s:63 l:15631182
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:17687565 l:385560
GEOM: Configure ad0s7, start 1052868096 length 8003165184 end 9056033279
MBREXT Slice 8 on ad0s4:
[0] f:80 typ:131 s(CHS):0/1/1 e(CHS):23/254/63 s:63 l:385497
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:18073125 l:979965
GEOM: Configure ad0s8, start 9056065536 length 197374464 end 9253439999
MBREXT Slice 9 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):60/254/63 s:63 l:979902
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:19053090 l:2923830
GEOM: Configure ad0s9, start 9253472256 length 501709824 end 9755182079
MBREXT Slice 10 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):181/254/63 s:63 l:2923767
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:21976920 l:7807590
GEOM: Configure ad0s10, start 9755214336 length 1496968704 end 11252183039
MBREXT Slice 11 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):485/254/63 s:63 l:7807527
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:29784510 l:738990
GEOM: Configure ad0s11, start 11252215296 length 3997453824 end 15249669119
MBREXT Slice 12 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):45/254/63 s:63 l:738927
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:30523500 l:385560
GEOM: Configure ad0s12, start 15249701376 length 378330624 end 15628031999
MBREXT Slice 13 on ad0s4:
[0] f:80 typ:131 s(CHS):0/1/1 e(CHS):23/254/63 s:63 l:385497
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:30909060 l:5863725
GEOM: Configure ad0s13, start 15628064256 length 197374464 end 15825438719
MBREXT Slice 14 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):364/254/63 s:63 l:5863662
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:36772785 l:4690980
GEOM: Configure ad0s14, start 15825470976 length 3002194944 end 18827665919
MBREXT Slice 15 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):291/254/63 s:63 l:4690917
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:41463765 l:979965
GEOM: Configure ad0s15, start 18827698176 length 2401749504 end 21229447679
MBREXT Slice 16 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):60/254/63 s:63 l:979902
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:42443730 l:546210
GEOM: Configure ad0s16, start 21229479936 length 501709824 end 21731189759
MBREXT Slice 17 on ad0s4:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):33/254/63 s:63 l:546147
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s17, start 21731222016 length 279627264 end 22010849279
[0] f:00 typ:130 s(CHS):0/1/1 e(CHS):30/254/63 s:63 l:497952
[1] f:00 typ:5 s(CHS):31/0/1 e(CHS):127/254/63 s:498015 l:1558305
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s4s1, start 32256 length 254951424 end 254983679
GEOM: Configure ad0s4s2, start 254983680 length 797852160 end 1052835839
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
MBREXT Slice 5 on ad0s4s2:
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):96/254/63 s:63 l:1558242
[1] f:00 typ:5 s(CHS):128/0/1 e(CHS):1023/254/63 s:2056320 l:15631245
GEOM: Configure ad0s4s5, start 32256 length 797819904 end 797852159
[0] f:00 typ:131 s(CHS):0/1/1 e(CHS):96/254/63 s:63 l:1558242
[1] f:00 typ:5 s(CHS):128/0/1 e(CHS):1023/254/63 s:2056320 l:15631245
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s4s2s1, start 32256 length 797819904 end 797852159
GEOM: Configure ad0s4s2s2, start 1052835840 length 8003197440 end 9056033279
acpi_cmbat0: battery initialization done, tried 2 times
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
--
http://swpat.ffii.org/
Giuseppe
More information about the freebsd-mobile
mailing list