Problem upgrading Tosh from FBSD4 to FBSD5

[Tuc at T-B-O-H]

Hi,

	Following http://www.freebsd.org/releases/5.3R/migration-guide.html and
I ran into a problem. When I boot to single user mode It sticks and can't get 
farther. I'm typing this by hand....

atapci0: <Intel PIIX4 UDMA33 controller> port 0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 5.1 on pci0
atapci0: Lazy allocation of 0x10 bytes rid 0x20 type 4 at 0
ata0: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376

	What now? Its a brick!

		Thanks, Tuc