Xircom Driver Issue

[Scott Mitchell]

On Tue, Dec 06, 2005 at 11:28:03PM -0800, Lakshminarayanan Sundareswaran wrote:
> Hi All,
> 
> I'm new to FreeBSD. I recently installed FreeBSD 6.0 in my Laptop. The
> installation completed successfully, but I was not able to configure the
> network. Later on I found that my xe driver was not loading properly. The xe
> driver is compiled into the kernel. During boot I'm getting the following
> error message:
> 
> module_register: module pccard/xe already exists!
> Module pccard/xe failed to register already exists
> 
> ed1: <Xircom 10/100 Network PC Card> at port 0x100-0x10f iomem
> 0x88000000-0x88000fff irq 11 function 0 config 1 on pccard0
> device _attach: ed1 attach returned 6
> 
> I'm using a Xircom (XE2000) 32bit PCMCIA 10/100 Ethernet only card.
> 
> Can anyone pls help mein resolveing the issue?

I don't think I can help with the real problem, but this is nothing to do
with xe - your card is a CardBus device that wants to work with the ed
driver.  That said, I know there are some outstanding annoyances with xe
I need to look at...

	Scott

-- 
===========================================================================
Scott Mitchell           | PGP Key ID | "Eagles may soar, but weasels
Cambridge, England       | 0x54B171B9 |  don't get sucked into jet engines"
scott at fishballoon.org | 0xAA775B8B |      -- Anon