HP nx9005 and Netgear WG511T

[Kirill Ponomarew]

Please, switch to plain text content type.

On Sat, Aug 20, 2005 at 04:43:35PM +0200, Dylan Wylie wrote:
> Did it work on any previous builds? My 5212 ath woks fine with a
> build from the 13th.

I didn't try this NIC on another releases than 7 current.

> ath0: Atheros 5212 mem 0x88000000-0x8800ffff irq 10 at device 0.0 on cardbus0
> ath0: [GIANT-LOCKED]
> ath0: Ethernet address: 00:0d:54:98:a8:35
> ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3

> This is a 3com CRPAG175.  Why don't I see any ghz info in yours?
> Could a 'faulty' radio produce both of your error messages, I
> wonder?  Isn't there a radio on/off switch somewhere? What about
> ifconfig's txpower switch or powersave?  Just shoot'n.  Did this
> card EVER work?

You're able to run it on HP Compaq nx9005 ?

I'm afraid there is something more broken than ath driver.  After
unplugging the card, I'm also getting on console:

ath0: ath_reset: unable to reset hardware; hal status 3229953940
ath0: hardware error; resetting
ath0: ath_chan_set: unable to reset channel 6 (2437 Mhz)
ath0: ath_reset: unable to reset hardware; hal status 3229953940
ath0: detached

-Kirill