Palm or equalient supported by FreeBSD

[Alexandre "Sunny" Kovalenko]

On Thu, 2004-11-04 at 10:38, Randy Bush wrote:
> i am not even getting the usb entries in log
> 
> # kldstat 
> Id Refs Address    Size     Name
>  1   29 0xc0400000 38a4e8   kernel
>  2    1 0xc078b000 6db8     linprocfs.ko
>  3    2 0xc0792000 1eadc    linux.ko
>  4    1 0xc07b1000 bc58     ipfw.ko
>  5    1 0xc07bd000 5e24     snd_ich.ko
>  6    2 0xc07c3000 1f4fc    sound.ko
>  7    1 0xc07e3000 4338     acpi_video.ko
>  8   15 0xc07e8000 5a808    acpi.ko
>  9    1 0xc0843000 33bc     umct.ko
> 10    2 0xc0847000 3508     ucom.ko
> 11    1 0xc4452000 19000    radeon.ko
> 12    1 0xc446b000 11000    agp.ko
> 
> and, when the tungsten-t is p[lugged into the usb, 
> 
> # usbdevs -v
> Controller /dev/usb0:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
>  port 1 powered
>  port 2 powered
> Controller /dev/usb1:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
>  port 1 powered
>  port 2 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x0000), rev 1.00
>  port 1 powered
>  port 2 powered
> Controller /dev/usb3:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x0000), rev 1.00
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
>  port 5 powered
>  port 6 powered
> 
> can someone with the working palm tungsten environment post their
> recipe?  /etc/usbd.conf, kldstat, jpilot pref/settings/device, etc?
> 
> thanks.
> 
> randy
> 
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
> _______________________________________________
> freebsd-usb at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-usb
> To unsubscribe, send any mail to "freebsd-usb-unsubscribe at freebsd.org"
First a disclaimer: I do not have working Tungsteen and even on my CLIE
I have to resort to the serial port sync ;) However, if I am not
mistaken, you would not see anything until you activate USB port on your
Palm somehow (e.g. hit "HotSync" button or have some other application
talk to it). 

On top of that, I would expect that you need uvisor.ko loaded to emulate
serial interface.

And while we are on the subject -- anyone out there figured out what to
do with 5.3/6.0 -- ttyUn/cuaUn devices are being created when you hit
"HotSync" and demolished promptly after sync is done, IMHO making
impossible to have daemon process looking out for the device.

---
Alexandre "Sunny" Kovalenko.