Antwort: HELP FBSD WONT BOOT Toshiba Satelite A30

[Peter Wood]

Eric,

I've got a Sat Pro A10, 4.9 worked fine on it, but 5.X didn't without changing
a setting. Try shoving the following in your loader.rc. 

[xenon:~]# cat /usr/remotesystems/cobalt/boot/loader.rc
set hw.pci.enable_io_modes="0"

Disabling APCI had no effect for me, I'm not sure what the above actually
does, but it worked for me. Worth a shot :).

Kind regards,

Peter.
-- 
Peter Wood <peter at alastria.net> :: Tel +44 7974 799440

On Thu, 20 May 2004 18:56:35 +0930, you wrote:

>Krill
>
>I have tried disbabling ACPI from both the loader and the Beastie menu
>When I disable acpi from the loader and also set
>hw.pci.allow_unsupported_io_range="1"
>I just get the spining /|-\ characters until its stops hung then it reboots
>after say a minute with no explaination of why etc
>
>Eric
>----- Original Message -----
>From: "Kirill Bezzubets" <kirill at solaris.ru>
>To: "Eric Parsonage" <eric at eparsonage.com>
>Cc: <orm.hager at sercon.de>; <freebsd-mobile at freebsd.org>
>Sent: Thursday, May 20, 2004 4:31 PM
>Subject: Re: Antwort: HELP FBSD WONT BOOT Toshiba Satelite A30
>
>
>> On Thu, May 20, 2004 at 07:52:29AM +0930, Eric Parsonage wrote:
>>
>> > To All those that replied thanks.
>> >
>> > Some have asked if I have used a boot manager. Unfortunately I am not
>even
>> > at that stage I havent managed to boot from the CD and do an install.
>Some
>> > asked if I tried booting without ACPI and yes I have tried all of the
>> > prompts.
>> >
>> > To Orm in particular
>> >
>> > I have been using FBSD for about 4 years and never had to use the loader
>> > prompt until now so I probably have done this wrong.
>> >
>> > I entered the loader prompt  and typed
>> >
>> > >>set hw.pci.allow_unsupported_io_range="1"
>> >
>> > then I typed
>> >
>> > boot and I got the same result the machine hung then after a few seconds
>> > rebooted. I suspect it has something to do with ACPI since it says
>> >
>> > /boot/kernel/acpi.ko text=0x3f088 data= (then some more numbers I cant
>> > /read before it reboots
>> >
>> > Any more suggestions would be most welcome
>> >
>>
>> Try to boot without acpi.
>> Check out the archives how to do this from loader prompt.
>>
>> Or, if you have Beastie menu - choose boot with ACPI disabled.
>>
>> --
>> BR,
>> Kirill Bezzubets                                CASE-RIPE CASE-RIPN
>> CTO / Head Of N.O.C.                            mailto:kirill at solaris.ru
>> Solaris ISP & Telecommunications Co. Ltd        http://www.solaris.ru
>>
>>
>
>_______________________________________________
>freebsd-mobile at freebsd.org mailing list
>http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
>To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"