acpi problem

[Dan Cojocar]

	Hello,

	I get this acpi error:
ACPI-0335: *** Error: Cannot release Mutex [MUT1], not acquired
ACPI-1303: *** Error: Method execution failed [\\_TZ_.THRM._TMP] (Node 0xc40c19c0), AE_AML_MUTEX_NOT_ACQUIRED

I have a HP ze4560, please help me, to fix this.
Thanks.

Ps. Please CC me, i'm not on this list.

Here is my dmesg:

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #5: Tue May 11 20:59:16 EEST 2004
    root at Dexter.DexterLab.Net:/usr/obj/usr/src/sys/FREE
Preloaded elf kernel "/boot/kernel/kernel" at 0xc083a000.
Preloaded elf module "/boot/kernel/cd9660.ko" at 0xc083a21c.
Preloaded elf module "/boot/kernel/linprocfs.ko" at 0xc083a2c8.
Preloaded elf module "/boot/kernel/procfs.ko" at 0xc083a378.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc083a424.
Preloaded elf module "/boot/kernel/msdosfs.ko" at 0xc083a4d0.
Preloaded elf module "/boot/kernel/pfsync.ko" at 0xc083a57c.
Preloaded elf module "/boot/kernel/pflog.ko" at 0xc083a628.
Preloaded elf module "/boot/kernel/pf.ko" at 0xc083a6d4.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc083a77c.
Preloaded elf module "/boot/kernel/if_sis.ko" at 0xc083a828.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc083a8d4.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: mobile AMD Athlon(tm) XP2500+ (1855.20-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0480000<MP,AMIE,DSP,3DNow!>
real memory  = 502202368 (478 MB)
avail memory = 481759232 (459 MB)
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [GIANT-LOCKED]
pcibios: BIOS version 2.10
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
unknown: I/O range not supported
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
cpu0: <ACPI CPU (2 Cx states)> port 0x530-0x537 on acpi0
acpi_tz0: <Thermal Zone> port 0x530-0x537 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib0: slot 2 INTA is routed to irq 9
pcib0: slot 6 INTA is routed to irq 5
pcib0: slot 8 INTA is routed to irq 3
pcib0: slot 9 INTA is routed to irq 9
pcib0: slot 10 INTA is routed to irq 11
pcib0: slot 12 INTA is routed to irq 10
pcib0: slot 18 INTA is routed to irq 11
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib1: slot 5 INTA is routed to irq 10
drm0: <ATI Radeon RS100 Mobility U1> port 0x9000-0x90ff mem 0xe0100000-0xe010ffff,0xe8000000-0xefffffff irq 10 at device 5.0 on pci1
info: [drm] Initialized radeon 1.10.0 20020828 on minor 0
pci0: <serial bus, USB> at device 2.0 (no driver attached)
pcm0: <Acer Labs M5451> port 0x8400-0x84ff mem 0xe0007000-0xe0007fff irq 5 at device 6.0 on pci0
pcm0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8400
pcm0: <Conexant CX20468 AC97 Codec>
pcm0: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <simple comms> at device 8.0 (no driver attached)
pci0: <network> at device 9.0 (no driver attached)
pci0: <bridge, PCI-CardBus> at device 10.0 (no driver attached)
fwohci0: vendor=104c, dev=8026
fwohci0: <1394 Open Host Controller Interface> mem 0xe0000000-0xe0003fff,0xe0009000-0xe00097ff irq 10 at device 12.0 on pci0
fwohci0: Reserved 0x800 bytes for rid 0x10 type 3 at 0xe0009000
fwohci0: [GIANT-LOCKED]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:0d:9d:71:9e:59:e6:24
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:0d:9d:59:e6:24
fwe0: Ethernet address: 02:0d:9d:59:e6:24
fwohci0: Initiate bus reset
fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
atapci0: <AcerLabs Aladdin UDMA100 controller> port 0x8080-0x808f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 16.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x8080
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: at 0x1f0 irq 14 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: at 0x170 irq 15 on atapci0
pci0: <bridge, PCI-unknown> at device 17.0 (no driver attached)
sis0: <NatSemi DP8381[56] 10/100BaseTX> port 0x8c00-0x8cff mem 0xe000a000-0xe000afff irq 11 at device 18.0 on pci0
sis0: Reserved 0x100 bytes for rid 0x10 type 4 at 0x8c00
sis0: Silicon Revision: DP83816A
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: Ethernet address: 00:0d:9d:59:95:d4
sis0: [GIANT-LOCKED]
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: failed to get status.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
acpi_ec0: <Embedded Controller: GPE 0x18> port 0x66,0x62 on acpi0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xdb000-0xdbfff,0xcf000-0xcf7ff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounter "TSC" frequency 1855197374 Hz quality 800
Timecounters tick every 10.000 msec
ad0: 38154MB <ST94011A> [77520/16/63] at ata0-master UDMA100
acd0: CDRW <HL-DT-STCD-RW/DVD DRIVE GCC-4241N> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
pflog0: promiscuous mode enabled
    ACPI-0335: *** Error: Cannot release Mutex [MUT1], not acquired
    ACPI-1303: *** Error: Method execution failed [\\_TZ_.THRM._TMP] (Node 0xc40c19c0), AE_AML_MUTEX_NOT_ACQUIRED
pci0: driver added
pci0:2:0: reprobing on driver added
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
pci0: driver added
pci0:2:0: reprobing on driver added
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> mem 0xe0006000-0xe0006fff irq 9 at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0006000
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
pci0: driver added
pci0:8:0: reprobing on driver added
pci0:9:0: reprobing on driver added
pci0:10:0: reprobing on driver added
pci0:17:0: reprobing on driver added
pci1: driver added
psm0: failed to get status (doopen).