cbb: can't map IRQ...

[José Nicolás Castellano]

Sorry, now with CURRENT kernel, I can get in every device the next message
in dmesg:

pci0:<bridge,pci-unknown) at device 1.3(no driver attached)
$PIR:ROUTE_INTERRUPT failed

What is happening?

----- Original Message -----
From: "Russell Jackson" <rjackson at cserv62.csub.edu>
To: "Jos? Nicol?s Castellano" <nico at auditoriabalear.com>
Sent: Tuesday, March 09, 2004 10:52 PM
Subject: Re: cbb: can't map IRQ...


> On Tue, Mar 09, 2004 at 08:40:13PM +0100, Jos? Nicol?s Castellano wrote:
> > Hi,
> >
> > First I'm thankful to people to try to help me on IRC #FreeBSDhelp on
efnet,
> > and i would like to enter to this mailing list asking some questions:
> >
> > First, i'm in a trouble with a IBM ThinkPAD 560X I have 2 slots in my
PCMCIA
> > Card and FreeBSD Kernel can't detect cbb1 slot, cbb0 works fine, this is
the
> > output of dmesg :
> >
> > Copyright (c) 1992-2004 The FreeBSD Project.
> > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> >         The Regents of the University of California. All rights
reserved.
> > FreeBSD 5.2.1-RELEASE-p1 #0: Mon Mar  8 20:02:58 CET 2004
> >     root at x0riguer.noconname.org:/usr/obj/usr/src/sys/x0riguer
> > Preloaded elf kernel "/boot/kernel/kernel" at 0xc06b8000.
> > Timecounter "i8254" frequency 1193182 Hz quality 0
> > CPU: Pentium/P55C (quarter-micron) (231.78-MHz 586-class CPU)
> >   Origin = "GenuineIntel"  Id = 0x581  Stepping = 1
> >   Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
> > real memory  = 66912256 (63 MB)
> > avail memory = 59613184 (56 MB)
> > Intel Pentium detected, installing workaround for F00F bug
> > npx0: [FAST]
> > npx0: <math processor> on motherboard
> > npx0: INT 16 interface
> > pcibios: BIOS version 2.10
> > Using $PIR table, 4 entries at 0xc00fcc40
> > pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
> > pci0: <PCI bus> on pcib0
> > pci_cfgintr: 0:1 INTD BIOS irq 11
> > pci_cfgintr: 0:3 INTA BIOS irq 11
> > isab0: <PCI-ISA bridge> at device 1.0 on pci0
> > isa0: <ISA bus> on isab0
> > atapci0: <Intel PIIX4 UDMA33 controller> port 0xfcf0-0xfcff at device
1.1 on
> > pci
> > 0
> > ata0: at 0x1f0 irq 14 on atapci0
> > ata0: [MPSAFE]
> > ata1: at 0x170 irq 15 on atapci0
> > ata1: [MPSAFE]
> > uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x9000-0x901f irq
11
> > at de
> > vice 1.2 on pci0
> > usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
> > usb0: USB revision 1.0
> > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> > uhub0: 2 ports with 2 removable, self powered
> > pci0: <bridge, PCI-unknown> at device 1.3 (no driver attached)
> > cbb0: <TI1250 PCI-CardBus Bridge> mem 0x20822000-0x20822fff at device
2.0 on
> >  pci
> > 0
> > cardbus0: <CardBus bus> on cbb0
> > pci_cfgintr: 0:2 INTA routed to irq 11
> > cbb0: [MPSAFE]
> > ->cbb1: <TI1250 PCI-CardBus Bridge> mem 0x20821000-0x20821fff at device
2.1
> > on pci
> > 0
> > ->cardbus1: <CardBus bus> on cbb1
> > ->cbb: Unable to map IRQ...
> > device_probe_and_attach: cbb1 attach returned 12
> > pci0: <display, VGA> at device 3.0 (no driver attached)
> > orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
> > atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
> > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> > kbd0 at atkbd0
> > psm0: <PS/2 Mouse> irq 12 on atkbdc0
> > psm0: model Generic PS/2 mouse, device ID 0
> > sc0: <System console> at flags 0x100 on isa0
> > sc0: VGA <16 virtual consoles, flags=0x300>
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> > unknown: <PNP0303> can't assign resources (port)
> > unknown: <PNP0f13> can't assign resources (irq)
> > unknown: <PNP0c02> can't assign resources (port)
> > unknown: <PNP0e03> can't assign resources (port)
> > Timecounter "TSC" frequency 231777070 Hz quality 800
> > Timecounters tick every 10.000 msec
> > GEOM: create disk ad0 dp=0xc15f4b60
> > ad0: 3909MB <IBM-DTCA-24090> [7944/16/63] at ata0-master UDMA33
> > Mounting root from ufs:/dev/ad0s1a
> > rl0: <RealTek 8139 10/100BaseTX> port 0x1000-0x10ff mem
> > 0x88000000-0x880001ff ir
> > q 11 at device 0.0 on cardbus0
> > rl0: Ethernet address: 00:10:60:58:27:e2
> > miibus0: <MII bus> on rl0
> > rlphy0: <RealTek internal media interface> on miibus0
> > rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> >
> > ...
> >
> > If you can see i can load a pcmcia card in slot 0 but works bad in slot
1. I
> > tried to disable ACPI from boot, I imagine that i have to change IRQ
> > assignment from boot... but i don't know how to do it. In this case...
> > anyone can help me how can i see irq in every device and how to change
it
> > from boot and from kernel?
> >
> > - Another question is the error:
> >
> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
> > unknown: <PNP0303> can't assign resources (port)
> > unknown: <PNP0f13> can't assign resources (irq)
> > unknown: <PNP0c02> can't assign resources (port)
> > unknown: <PNP0e03> can't assign resources (port)
> >
> > what is this? How can i see what is it and fix it...