DWL-660 issues in FreeBSD

[Drew Broadley]

Drew Broadley wrote:

> Drew Broadley wrote:
>
>> Drew Broadley wrote:
>>
>>> I have purchased a DWL-660 (seeing it worked in FreeBSD for othe 
>>> rpeople
>>> and uses prism2, which I find out now that they changed it in newer
>>> revisions *sigh*)
>>>
>>> I cannot get a connection to my AP. dstumbler can pick it up and check
>>> the signal strength no problems.
>>>
>>>> ifconfig wi0 up ssid HOME channel 6
>>>
>>>
>>>
>>>
>>> Gives me:
>>>
>>> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
>>>        inet6 fe80::205:5dff:fe24:9617%wi0 prefixlen 64 scopeid 0x4
>>>        ether 00:05:5d:24:96:17
>>>        media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
>>>        status: no carrier
>>>        ssid HOME 1:HOME
>>>        stationname "FreeBSD WaveLAN/IEEE node"
>>>        channel 6 authmode OPEN powersavemode OFF powersavesleep 100
>>>        rtsthreshold 2312 protmode CTS
>>>        wepmode OFF weptxkey 1
>>>        wepkey 1:40-bit wepkey 2:40-bit wepkey 3:40-bit wepkey 4:40-bit
>>>
>>>>>>>>>>>>>> Note the: status: no carrier
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>
>> I can only get a "state: associated" with "mediaopt monitor" on the 
>> ifconfig line.
>>
>> Any ideas anyone ?
>>
>
> dmesg with hw.pccard.debug=1 and hw.pccard.cis_debug=1
>
> Jun 19 18:51:52 taz kernel: pccard0: chip_socket_enable
> Jun 19 18:51:53 taz kernel: pccard0: read_cis
> Jun 19 18:51:54 taz kernel: cis mem map 0xe675a000 (resource: 0x80000000)
> Jun 19 18:51:54 taz kernel: pccard0: CIS tuple chain:
> Jun 19 18:51:54 taz kernel: CISTPL_DEVICE type=null speed=null
> Jun 19 18:51:54 taz kernel: 01 03 00 00 ff
> Jun 19 18:51:54 taz kernel: CISTPL_DEVICE_A type=sram speed=ext
> Jun 19 18:51:54 taz kernel: 17 04 67 5a 08 ff
> Jun 19 18:51:54 taz kernel: unhandled CISTPL 1d
> Jun 19 18:51:54 taz kernel: 1d 05 01 67 5a 08 ff
> Jun 19 18:51:54 taz kernel: CISTPL_VERS_1
> Jun 19 18:51:54 taz kernel: 15 50 05 00 44 2d 4c 69 6e 6b 00 44 2d 4c 
> 69 6e
> Jun 19 18:51:54 taz kernel: 6b 20 41 69 72 20 44 57 4c 2d 36 36 30 20 
> 57 69
> Jun 19 18:51:54 taz kernel: 72 65 6c 65 73 73 20 50 43 20 43 61 72 64 
> 00 56
> Jun 19 18:51:54 taz kernel: 65 72 73 69 6f 6e 20 30 31 2e 30 31 00 00 
> 00 00
> Jun 19 18:51:54 taz kernel: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
> 00 00
> Jun 19 18:51:54 taz kernel: 00 ff
> Jun 19 18:51:54 taz kernel: CISTPL_MANFID
> Jun 19 18:51:54 taz kernel: 20 04 56 01 02 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCID
> Jun 19 18:51:54 taz kernel: 21 02 06 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 02 01 07
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 05 02 40 42 0f 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 05 02 80 84 1e 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 05 02 60 ec 53 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 05 02 c0 d8 a7 00
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 02 03 07
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 08 04 06 00 05 5d 24 96 17
> Jun 19 18:51:54 taz kernel: CISTPL_FUNCE
> Jun 19 18:51:54 taz kernel: 22 02 05 01
> Jun 19 18:51:54 taz kernel: CISTPL_CONFIG
> Jun 19 18:51:54 taz kernel: 1a 07 03 01 e0 03 00 00 01
> Jun 19 18:51:54 taz kernel: CISTPL_CFTABLE_ENTRY
> Jun 19 18:51:54 taz kernel: 1b 0f c1 01 19 76 c5 4b d5 19 36 36 05 46 
> 7f ff
> Jun 19 18:51:54 taz kernel: ff
> Jun 19 18:51:54 taz kernel: CISTPL_END
> Jun 19 18:51:54 taz kernel: ff
> Jun 19 18:51:54 taz kernel: cis mem map e675a000
> Jun 19 18:51:54 taz kernel: CISTPL_LINKTARGET expected, code 04 observed
> Jun 19 18:51:54 taz kernel: pccard0: check_cis_quirks
> Jun 19 18:51:54 taz kernel: pccard0: CIS version PC Card Standard 5.0
> Jun 19 18:51:54 taz kernel: pccard0: CIS info: D-Link, D-Link Air 
> DWL-660 Wireless PC Card, Version 01.01,
> Jun 19 18:51:54 taz kernel: pccard0: Manufacturer code 0x156, product 0x2
> Jun 19 18:51:54 taz kernel: pccard0: function 0: network adapter, ccr 
> addr 3e0 mask 1
> Jun 19 18:51:54 taz kernel: pccard0: function 0, config table entry 1: 
> I/O card; irq mask ffff; iomask 6, iospa
> ce 0-3f; io16 irqpulse irqlevel
> Jun 19 18:51:54 taz kernel: pccard0: functions scanning
> Jun 19 18:51:54 taz kernel: pccard0: Card has 1 functions. pccard_mfc 
> is 0
> Jun 19 18:51:54 taz kernel: pccard0: I/O rid 0 start 0 end ffffffff
> Jun 19 18:51:54 taz kernel: pccard0: ccr_res == 80000000-800003ff, 
> base=3e0
> Jun 19 18:51:54 taz kernel: pccard0: function 0 CCR at 0 offset 3e0: 
> 41 80 22 ff, ff ff ff ff, ff
> Jun 19 18:51:54 taz kernel: wi0: <D-Link D-Link Air DWL-660 Wireless 
> PC Card> at port 0x2080-0x20bf irq 11 func
> tion 0 config 1 on pccard0
> Jun 19 18:51:54 taz kernel: wi0: [GIANT-LOCKED]
> Jun 19 18:51:54 taz kernel: wi0: using Lucent Technologies, WaveLAN/IEEE
> Jun 19 18:51:54 taz kernel: wi0: Lucent Firmware: Station (8.10.1)
> Jun 19 18:51:54 taz kernel: wi0: Ethernet address: 00:05:5d:24:96:17
> Jun 19 18:51:54 taz kernel: wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
> Jun 19 18:51:54 taz kernel: pccard0: function 0 CCR at 0 offset 3e0 
> mask 1: 41 80 22 ff, ff ff ff ff, ff
>
>
When issuing "ifconfig wi0 up ssid HOME" I get this in /var/log/messages:
Jun 19 20:55:02 taz kernel: wi_newstate: INIT -> INIT

Surely tthis is meant to go beyond INIT ?
- Drew