5.2-CURRENT still not working on my mitac 8080

[John Baldwin]

On Wednesday 14 July 2004 02:57 pm, David W. Chapman Jr. wrote:
> John Baldwin wrote:
> >On Wednesday 14 July 2004 09:25 am, David W. Chapman Jr. wrote:
> >>When I boot in safe mode here is the console output
> >>
> >>pir0: <PCI Interrupt Routing Table: 9 Entries> on motherboard
> >>$PIR: BIOS IRQ 10 for 1.4.INTA does not match link 0x61 irq 5
> >>pci0: <PCI bus> on pcib0
> >
> >Look for a BIOS upgrade.  It sounds like your BIOS has badly busted
> > interrupt routing.
>
> I think I can get one, I don't have a problem running 4.X though, would
> that be consistent with the problem you described?

4.x isn't smart enough to ask the BIOS how to route interrupts from the BIOS 
tables, it just assumes that the way it booted is ok.

-- 
John Baldwin <jhb at FreeBSD.org>  <><  http://www.FreeBSD.org/~jhb/
"Power Users Use the Power to Serve"  =  http://www.FreeBSD.org