wi0: couldn't reset prism2.5 core [DWL-520]

[Omer Ansari]

Folks,

Running 4.9-STABLE
trying to get:  
D-Link DWL-520 PCI 802.11b Wireless Adaptor to work.

While bootup, it goes through and detects the chipset,
on line 2, and then it waits for a long time after
timing out and spewing the errors in line 3 and 4 
the lines ennumerated:

(1) pci1: <PCI bus> on pcib1
(2) wi0: <Intersil Prism2.5> mem 0xf4200000-0xf4200fff
irq 9 at device 8.0 on pci1
(3) wi0: couldn't reset prism2.5 core.
(4) device_probe_and_attach: wi0 attach returned 6


Couldnt find much by searching the alias, nor on google.


Does anyone have any idea whats happening?

I've attached my dmesg output, as well as my kernel
configuration file. If there is anything else needed
let me know..



Thanks in advance!

Omer Ansari
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FOURDOTNINE
Type: application/octet-stream
Size: 9886 bytes
Desc: not available
Url : http://lists.freebsd.org/pipermail/freebsd-mobile/attachments/20040119/52d79d50/FOURDOTNINE.obj
-------------- next part --------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.9-STABLE #0: Mon Jan 19 12:13:36 EST 2004
    knail1 at r2dx:/usr/src/sys/compile/FOURDOTNINE
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel Pentium III (870.36-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 267321344 (261056K bytes)
config> di pcic0
No such device: pcic0
Invalid command or syntax.  Type `?' for help.
config> di sn0
config> di lnc0
config> di fe0
config> di ed0
config> di cs0
config> di bt0
No such device: bt0
Invalid command or syntax.  Type `?' for help.
config> di aic0
No such device: aic0
Invalid command or syntax.  Type `?' for help.
config> di aha0
No such device: aha0
Invalid command or syntax.  Type `?' for help.
config> di adv0
No such device: adv0
Invalid command or syntax.  Type `?' for help.
config> q
avail memory = 256499712 (250488K bytes)
Preloaded elf kernel "kernel" at 0xc0391000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc039109c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82810E (i810E GMCH) Host To Hub bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82810E (i810E GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 1.0 on pci0
pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci1: <PCI bus> on pcib1
wi0: <Intersil Prism2.5> mem 0xf4200000-0xf4200fff irq 9 at device 8.0 on pci1
wi0: couldn't reset prism2.5 core.
device_probe_and_attach: wi0 attach returned 6
xl0: <3Com 3c900B-TPO Etherlink XL> port 0x2000-0x207f mem 0xf4100000-0xf410007f irq 10 at device 10.0 on pci1
xl0: Ethernet address: 00:01:02:91:86:78
xl0: selecting 10baseT transceiver, half duplex
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0x10a0-0x10af at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1080-0x109f irq 11 at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
pcm0: <Intel ICH (82801AA)> port 0x1300-0x133f,0x1200-0x12ff irq 0 at device 31.5 on pci0
pci_cfgintr_search: linked (61) to configured irq 9 at 1:8:0
pci_cfgintr: 0:31 INTB routed to irq 9
pcm0: <Cirrus Logic CS4299 AC97 Codec>
orm0: <Option ROMs> at iomem 0xc0000-0xc9fff,0xd8000-0xdbfff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 39083MB <Maxtor 34098H4> [79408/16/63] at ata0-master UDMA66
acd0: DVD-ROM <TOSHIBA DVD-ROM SD-M1502> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s2a
/dev/vmmon: Module vmmon: registered with major=200 minor=0 tag=$Name: build-570 $
/dev/vmmon: Module vmmon: initialized
xl0: promiscuous mode enabled
vmnet1: promiscuous mode enabled