Subset of power patch: subtractive decoding
Jesse Guardiani
jesse at wingnet.net
Tue Jan 13 14:54:04 PST 2004
M. Warner Losh wrote:
> I've teased out the subtractive bridge decoding patches from the
> larger power patches. Please test them and let me know how things
> go. This eliminates hw.pci.allow_unsupported_io_range by fixing the
> underlying problem this was kludging around. Please test it and let
> me know how it is working for you. It should only make things better,
> and make nothing worse.
>
> This won't fix the other problems that the more complete power patches
> attempt to fix.
>
> http://people.freebsd.org/~imp/pci-subtractive.diff
>
> Warner
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to "freebsd-mobile-unsubscribe at freebsd.org"
Well, on my IBM A30p this patch mostly works. However, if I try to boot
with my pcmcia 56k 3Com Megahertz 3CXM756 installed the machine hangs.
In fact, if I insert the card after a successfull boot the machine hangs,
but removing the card immediately fixes the hang.
Here's the message it prints before it hangs:
pcib2: device pccard0 requested decoded memory range 0xc0200000-0xcfffffff
And here's my verbose dmesg.boot:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RC1 #1: Tue Jan 13 17:06:09 EST 2004
jesse at trevarthan.int.wingnet.net:/usr/src/sys/i386/compile/TREVARTHAN
Preloaded elf kernel "/boot/kernel/kernel" at 0xc086c000.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc086c278.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc086c324.
Preloaded elf module "/boot/kernel/apm.ko" at 0xc086c3d0.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc086c478.
Calibrating clock(s) ... i8254 clock: 1193165 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1198987285 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU 1200MHz (1198.99-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402063360 (383 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001788bfff, 382099456 bytes (93286 pages)
avail memory = 380850176 (363 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f7420
bios32: Entry = 0xfd7e0 (c00fd7e0) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd770+0x18e
pnpbios: Found PnP BIOS data at 0xc00f7480
pnpbios: Entry = f0000:a15c Rev = 1.0
pnpbios: Event flag at 4b4
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: Other PM system enabled.
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Using $PIR table, 14 entries at 0xc00fdeb0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 1 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 1 2 2 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 B 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 3 D 0x63 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15
slot 2 9 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 9 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 9 2 B 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 2 8 A 0x68 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 A 0x60 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 29 D 0x6b 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12 14 15
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12 14 15
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base d0000000, size 28, enabled
found-> vendor=0x8086, dev=0x3575, revid=0x02
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x3576, revid=0x02
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0020, cachelnsz=0 (dwords)
lattimer=0x60 (2880 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 00001800, size 5, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 0:29 INTA BIOS irq 9
found-> vendor=0x8086, dev=0x2482, revid=0x01
bus=0, slot=29, func=0
class=0c-03-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
map[20]: type 4, range 32, base 00001820, size 5, enabled
pci_cfgintr_valid: BIOS irq 11 is valid
pci_cfgintr: 0:29 INTB BIOS irq 11
found-> vendor=0x8086, dev=0x2484, revid=0x01
bus=0, slot=29, func=1
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=11
map[20]: type 4, range 32, base 00001840, size 5, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 0:29 INTC BIOS irq 9
found-> vendor=0x8086, dev=0x2487, revid=0x01
bus=0, slot=29, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=9
found-> vendor=0x8086, dev=0x2448, revid=0x41
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x248c, revid=0x01
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00001860, size 4, enabled
found-> vendor=0x8086, dev=0x248a, revid=0x01
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[20]: type 4, range 32, base 00001880, size 5, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:31 INTB BIOS irq 5
found-> vendor=0x8086, dev=0x2483, revid=0x01
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type 4, range 32, base 00001c00, size 8, port disabled
map[14]: type 4, range 32, base 000018c0, size 6, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:31 INTB BIOS irq 5
found-> vendor=0x8086, dev=0x2485, revid=0x01
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
map[10]: type 4, range 32, base 00002400, size 8, port disabled
map[14]: type 4, range 32, base 00002000, size 7, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 0:31 INTB BIOS irq 5
found-> vendor=0x8086, dev=0x2486, revid=0x01
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0000, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=5
agp0: <Intel 82830 host to AGP bridge> mem 0xd0000000-0xdfffffff at device 0.0 on pci0
agp0: allocating GATT for aperture of size 228M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xc0100000-0xc01fffff
pcib1: prefetched decode 0xe0000000-0xe7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base e0000000, size 27, enabled
map[14]: type 4, range 32, base 00003000, size 8, enabled
map[18]: type 1, range 32, base c0100000, size 16, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 1:0 INTA BIOS irq 9
found-> vendor=0x1002, dev=0x4c59, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0387, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x1800-0x181f irq 9 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB Receiver, rev 1.10/16.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x1840-0x185f irq 9 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <PCIBIOS PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 8
pcib2: I/O decode 0x4000-0x8fff
pcib2: memory decode 0xc0200000-0xcfffffff
pcib2: prefetched decode 0xe8000000-0xf00fffff
pcib2: Subtractively decoded bridge.
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base 50000000, size 12, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 2:0 INTA BIOS irq 9
found-> vendor=0x1180, dev=0x0478, revid=0xa0
bus=2, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 50100000, size 12, enabled
pci_cfgintr_valid: BIOS irq 5 is valid
pci_cfgintr: 2:0 INTB BIOS irq 5
found-> vendor=0x1180, dev=0x0478, revid=0xa0
bus=2, slot=0, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0107, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x80 (32000 ns), maxlat=0x07 (1750 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base c0201000, size 11, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 2:0 INTC BIOS irq 9
found-> vendor=0x1180, dev=0x0522, revid=0x00
bus=2, slot=0, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0106, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 3, range 32, base f0000000, size 12, enabled
pci_cfgintr_valid: BIOS irq 9 is valid
pci_cfgintr: 2:2 INTA BIOS irq 9
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=2, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=9
powerspec 2 supports D0 D3 current D0
map[10]: type 1, range 32, base c0200000, size 12, enabled
map[14]: type 4, range 32, base 00008000, size 6, enabled
pci_cfgintr_valid: BIOS irq 10 is valid
pci_cfgintr: 2:8 INTA BIOS irq 10
found-> vendor=0x8086, dev=0x1031, revid=0x41
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
cbb0: <RF5C478 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 9 at device 0.0 on pci2
pcib2: device cbb0 requested decoded memory range 0x50000000-0x50000fff
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04781180 0x02100107 0x060700a0 0x00824000
0x10: 0x50000000 0x020000dc 0xb0050302 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000109
0x40: 0x01841014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x04800001 0x00000000 0x04630464 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x000a0000 0x00000000 0x00f00000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x01841014 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C478 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 5 at device 0.1 on pci2
pcib2: device cbb1 requested decoded memory range 0x50100000-0x50100fff
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04781180 0x02100107 0x060700a0 0x00824000
0x10: 0x50100000 0x020000dc 0xb0080602 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x07000205
0x40: 0x01841014 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x04800001 0x00000000 0x04630464 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x000a0000 0x00000000 0x00f00000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x01841014 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
pci2: <serial bus, FireWire> at device 0.2 (no driver attached)
wi0: <Intersil Prism2.5> mem 0xf0000000-0xf0000fff irq 9 at device 2.0 on pci2
pcib2: device wi0 requested decoded memory range 0xf0000000-0xf0000fff
wi0: 802.11 address: 00:20:e0:8a:90:61
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.2)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port 0x8000-0x803f mem 0xc0200000-0xc0200fff irq 10 at device 8.0 on pci2
pcib2: device fxp0 requested decoded memory range 0xc0200000-0xc0200fff
fxp0: using memory space register mapping
fxp0: Ethernet address 00:d0:59:aa:70:ec
fxp0: PCI IDs: 8086 1031 1014 0209 0041
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1860-0x186f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 31.1 on pci0
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: reset tp1 mask=03 ostat0=50 ostat1=00
ata1-master: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1-slave: stat=0x00 err=0x01 lsb=0x14 msb=0xeb
ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0xc<ATAPI_SLAVE,ATAPI_MASTER>
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1880-0x189f irq 5 at device 31.3 on pci0
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x18c0-0x18ff,0x1c00-0x1cff irq 5 at device 31.5 on pci0
pcm0: <Cirrus Logic CS4299 AC97 Codec (id = 0x43525936)>
pcm0: Codec features headphone, 20 bit DAC, 18 bit ADC, 6 bit master volume, Crystal Semi 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP
pcm0: sndbuf_setmap 2c1000, 4000; 0xe38ed000 -> 2c1000
pcm0: sndbuf_setmap 2c5000, 4000; 0xe38f1000 -> 2c5000
pci0: <simple comms> at device 31.6 (no driver attached)
eisa0: <EISA bus> on motherboard
eisa0: unknown card @H at 0000 (0x01000000) at slot 1
pnpbios: 23 devices, largest 238 bytes
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x24-0x25, size=0x2, align=0x1
PNP0c02: adding io range 0x28-0x29, size=0x2, align=0x1
PNP0c02: adding io range 0x2c-0x2d, size=0x2, align=0x1
PNP0c02: adding io range 0x30-0x31, size=0x2, align=0x1
PNP0c02: adding io range 0x34-0x35, size=0x2, align=0x1
PNP0c02: adding io range 0x38-0x39, size=0x2, align=0x1
PNP0c02: adding io range 0x3c-0x3d, size=0x2, align=0x1
PNP0c02: adding io range 0x50-0x53, size=0x4, align=0x1
PNP0c02: adding io range 0x72-0x73, size=0x2, align=0x1
PNP0c02: adding io range 0x74-0x75, size=0x2, align=0x1
PNP0c02: adding io range 0x76-0x77, size=0x2, align=0x1
PNP0c02: adding io range 0x80-0x80, size=0x1, align=0x1
PNP0c02: adding io range 0x90-0x91, size=0x2, align=0x1
PNP0c02: adding io range 0x92-0x92, size=0x1, align=0x1
PNP0c02: adding io range 0x93-0x9f, size=0xd, align=0x1
PNP0c02: adding io range 0xa4-0xa5, size=0x2, align=0x1
PNP0c02: adding io range 0xa8-0xa9, size=0x2, align=0x1
PNP0c02: adding io range 0xac-0xad, size=0x2, align=0x1
PNP0c02: adding io range 0xb0-0xb1, size=0x2, align=0x1
PNP0c02: adding io range 0xb2-0xb3, size=0x2, align=0x1
PNP0c02: adding io range 0xb4-0xb5, size=0x2, align=0x1
PNP0c02: adding io range 0xb8-0xb9, size=0x2, align=0x1
PNP0c02: adding io range 0xbc-0xbd, size=0x2, align=0x1
PNP0c02: adding io range 0x15e0-0x15ef, size=0x10, align=0x8
PNP0c02: adding io range 0x1600-0x167f, size=0x80, align=0x8
PNP0c02: adding fixed memory32 range 0xffc00000-0xffffffff, size=0x400000
pnpbios: handle 1 device ID PNP0c02 (020cd041)
PNP0c01: adding fixed memory32 range 0-0x9ffff, size=0xa0000
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x100000-0x17ffffff, size=0x17f00000
pnpbios: handle 2 device ID PNP0c01 (010cd041)
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x81-0x8f, size=0xf, align=0x1
PNP0200: adding io range 0xc0-0xdf, size=0x20, align=0x1
PNP0200: adding dma mask 0x10
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: adding irq mask 0x1
pnpbios: handle 5 device ID PNP0100 (0001d041)
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: adding irq mask 0x100
pnpbios: handle 6 device ID PNP0b00 (000bd041)
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: adding irq mask 0x2
pnpbios: handle 7 device ID PNP0303 (0303d041)
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: adding irq mask 0x2000
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 9 device ID PNP0800 (0008d041)
PNP0a03: adding io range 0xcf8-0xcff, size=0x8, align=0x1
pnpbios: handle 10 device ID PNP0a03 (030ad041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0x1000-0x105f, size=0x60, align=0x1
PNP0c02: adding io range 0x1060-0x107f, size=0x20, align=0x1
PNP0c02: adding io range 0x1180-0x11bf, size=0x40, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb80000-0xffbfffff, size=0x80000
INT0800: adding fixed memory32 range 0xffb00000-0xffb7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa80000-0xffafffff, size=0x80000
INT0800: adding fixed memory32 range 0xffa00000-0xffa7ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff980000-0xff9fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff900000-0xff97ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff880000-0xff8fffff, size=0x80000
INT0800: adding fixed memory32 range 0xff800000-0xff87ffff, size=0x80000
INT0800: adding fixed memory32 range 0xff000000-0xff07ffff, size=0x80000
pnpbios: handle 12 device ID INT0800 (0008d425)
PNP0c02: adding memory32 range 0xdc000-0xdffff, size=0x4000, align=0x4000
pnpbios: handle 13 device ID PNP0c02 (020cd041)
pnpbios: handle 14 device ID PNP0c02 (020cd041)
PNP0c02: adding fixed memory32 range 0xd2000-0xd3fff, size=0x2000
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0680: adding io range 0x1f0-0x1f7, size=0x8, align=0x1
PNP0680: adding io range 0x3f6-0x3f6, size=0x1, align=0x1
PNP0680: adding irq mask 0x4000
PNP0680: adding io range 0x1860-0x1867, size=0x8, align=0x1
pnpbios: handle 16 device ID PNP0680 (8006d041)
PNP0680: adding io range 0x170-0x177, size=0x8, align=0x1
PNP0680: adding io range 0x376-0x376, size=0x1, align=0x1
PNP0680: adding irq mask 0x8000
PNP0680: adding io range 0x1868-0x186f, size=0x8, align=0x1
pnpbios: handle 17 device ID PNP0680 (8006d041)
IBM3780: adding irq mask 0x1000
pnpbios: handle 18 device ID IBM3780 (80374d24)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 19 device ID PNP0501 (0105d041)
IBM0071: adding dma mask 0x8
IBM0071: adding io range 0x2f8-0x2ff, size=0x8, align=0x8
IBM0071: adding irq mask 0x8
pnpbios: handle 20 device ID IBM0071 (71004d24)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x8
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 21 device ID PNP0700 (0007d041)
PNP0400: adding io range 0x3bc-0x3bf, size=0x4, align=0x4
PNP0400: adding irq mask 0x80
pnpbios: handle 23 device ID PNP0400 (0004d041)
pnpbios: handle 26 device ID PNP0e03 (030ed041)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
orm0: <Option ROMs> at iomem 0xe0000-0xeffff,0xdc000-0xdffff,0xd1000-0xd1fff,0xd0000-0xd0fff,0xc0000-0xcffff on isa0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x54ab (2)
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f
c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 91 4f 4f 95 57 0f
c0 1f 00 4f 0d 0e 00 00 07 80 90 83 8f 28 1f 8f
c1 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port found at 0x3bc
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at port 0x3bc-0x3c3 irq 7 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources (port)
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xff000000-0xff07ffff,0xff800000-0xff87ffff,0xff880000-0xff8fffff,0xff900000-0xff97ffff,0xff980000-0xff9fffff,0xffa00000-0xffa7ffff,0xffa80000-0xffafffff,0xffb00000-0xffb7ffff,0xffb80000-0xffbfffff on isa0
unknown: <PNP0c02> can't assign resources (memory)
unknown: <PNP0c02> at iomem 0xdc000-0xdffff on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x1f0-0x1f7 on isa0
unknown: <PNP0680> can't assign resources (port)
unknown: <PNP0680> at port 0x170-0x177 on isa0
unknown: <IBM3780> can't assign resources (irq)
unknown: <IBM3780> at irq 12 on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <IBM0071> can't assign resources (port)
unknown: <IBM0071> at port 0x2f8-0x2ff on isa0
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
ppc1: using normal I/O port range
ppc1: SPP
ppc1: <Standard parallel printer port> at port 0x3bc-0x3bf irq 7 on isa0
ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
plip0: bpf attached
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
unknown: <PNP0e03> failed to probe on isa0
Device configuration finished.
procfs registered
TSC timecounter disabled: APM enabled.
Timecounter "TSC" frequency 1198987285 Hz quality -1000
Timecounters tick every 10.000 msec
lo0: bpf attached
ata1: spurious interrupt - status=0x00 error=0x01
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
GEOM: create disk ad0 dp=0xc3b6a960
ad0: <IC25T048ATDA05-0/DA8OA76A> ATA-5 disk at ata0-master
ad0: 45780MB (93759120 sectors), 93015 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
GEOM: new disk ad0
[0] f:80 typ:7 s(CHS):0/1/1 e(CHS):1023/134/63 s:63 l:21455217
[1] f:00 typ:28 s(CHS):1023/255/63 e(CHS):1023/59/63 s:91098000 l:2661120
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:21455280 l:69633270
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 10985071104 end 10985103359
GEOM: Configure ad0s2, start 46642176000 length 1362493440 end 48004669439
GEOM: Configure ad0s3, start 10985103360 length 35652234240 end 46637337599
GEOM: Configure ad0s3a, start 0 length 314572800 end 314572799
GEOM: Configure ad0s3b, start 314572800 length 1073741824 end 1388314623
GEOM: Configure ad0s3c, start 0 length 35652234240 end 35652234239
GEOM: Configure ad0s3d, start 1388314624 length 8589934592 end 9978249215
GEOM: Configure ad0s3e, start 9978249216 length 1073741824 end 11051991039
GEOM: Configure ad0s3f, start 11051991040 length 24600243200 end 35652234239
ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata1-master: setting PIO4 on Intel ICH3 chip
ata1-master: setting UDMA33 on Intel ICH3 chip
acd0: <HL-DT-STDVD-ROM GDR8081N/0011> DVDROM drive at ata1 as master
acd0: read 1722KB/s (4134KB/s), 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
pcm0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
Linux ELF exec handler installed
linprocfs registered
--
Jesse Guardiani, Systems Administrator
WingNET Internet Services,
P.O. Box 2605 // Cleveland, TN 37320-2605
423-559-LINK (v) 423-559-5145 (f)
http://www.wingnet.net
More information about the freebsd-mobile
mailing list