More power patches
Norikatsu Shigemura
nork at FreeBSD.org
Fri Jan 9 16:35:52 PST 2004
On Wed, 07 Jan 2004 17:10:23 -0700 (MST)
"M. Warner Losh" <imp at bsdimp.com> wrote:
> I've updated the power patches. This includes the
> transparent/secondary bridge support and tweaks to the last version.
I tested on SHARP Mebius MURAMASA PC-MT2-F1(PentiumIII with i830MG).
But not work like 20040101 version.
1. fwochi/ehci can't read VERSION INFO, so don't attach.
2. cardbus is not available (cardbus bridge looks good).
if Compact Flash card is/isnot available, it don't probe.
3. suspend is OK. but resume is NG.
SEE ALSO: my dmesg (problem marked '* * * * * ...')
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.2-CURRENT #65: Fri Jan 9 06:06:02 JST 2004
nork at pelsia.ninth-nine.com:/usr/obj/usr/src/sys/PELSIA
Preloaded elf kernel "/boot/kernel/kernel" at 0xc08be000.
Preloaded elf module "/boot/kernel/splash_bmp.ko" at 0xc08be2f0.
Preloaded elf module "/boot/kernel/vesa.ko" at 0xc08be3a0.
Preloaded elf module "/boot/kernel/md.ko" at 0xc08be44c.
Preloaded elf module "/boot/kernel/if_rl.ko" at 0xc08be4f4.
Preloaded elf module "/boot/kernel/miibus.ko" at 0xc08be5a0.
Preloaded elf module "/boot/kernel/if_wi.ko" at 0xc08be64c.
Preloaded elf module "/boot/kernel/wlan.ko" at 0xc08be6f8.
Preloaded elf module "/boot/kernel/rc4.ko" at 0xc08be7a4.
Preloaded elf module "/boot/kernel/pccard.ko" at 0xc08be84c.
Preloaded elf module "/boot/kernel/snd_ich.ko" at 0xc08be8f8.
Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc08be9a4.
Preloaded elf module "/boot/kernel/usb.ko" at 0xc08bea50.
Preloaded elf module "/boot/kernel/ugen.ko" at 0xc08beaf8.
Preloaded elf module "/boot/kernel/umass.ko" at 0xc08beba4.
Preloaded elf module "/boot/kernel/cam.ko" at 0xc08bec50.
Preloaded elf module "/boot/kernel/agp.ko" at 0xc08becf8.
Preloaded elf module "/boot/kernel/accf_data.ko" at 0xc08beda0.
Preloaded elf module "/boot/kernel/accf_http.ko" at 0xc08bee50.
Preloaded elf module "/boot/kernel/random.ko" at 0xc08bef00.
Preloaded elf module "/boot/kernel/if_fwe.ko" at 0xc08befac.
Preloaded elf module "/boot/kernel/firewire.ko" at 0xc08bf058.
Preloaded elf module "/boot/kernel/snd_uaudio.ko" at 0xc08bf108.
Preloaded elf module "/boot/kernel/cardbus.ko" at 0xc08bf1b8.
Preloaded elf module "/boot/kernel/exca.ko" at 0xc08bf264.
Preloaded elf module "/boot/kernel/cbb.ko" at 0xc08bf310.
Preloaded elf module "/boot/kernel/sysvmsg.ko" at 0xc08bf3b8.
Preloaded elf module "/boot/kernel/sysvsem.ko" at 0xc08bf464.
Preloaded elf module "/boot/kernel/sysvshm.ko" at 0xc08bf510.
Preloaded elf module "/boot/kernel/aio.ko" at 0xc08bf5bc.
Preloaded elf module "/boot/kernel/sbp.ko" at 0xc08bf664.
Preloaded elf module "/boot/kernel/sbp_targ.ko" at 0xc08bf70c.
Preloaded elf module "/boot/kernel/dcons_crom.ko" at 0xc08bf7bc.
Preloaded elf module "/boot/kernel/uart.ko" at 0xc08bf86c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc08bf918.
Calibrating clock(s) ... i8254 clock: 1193159 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 996683179 Hz
CPU: Mobile Intel(R) Pentium(R) III CPU - M 1000MHz (996.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6b4 Stepping = 4
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 527958016 (503 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009dfff, 643072 bytes (157 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c26000 - 0x000000001ede5fff, 505151488 bytes (123328 pages)
0x000000001f700000 - 0x000000001f777fff, 491520 bytes (120 pages)
avail memory = 506757120 (483 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f6590
bios32: Entry = 0xfd870 (c00fd870) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd870+0x13a
pnpbios: Found PnP BIOS data at 0xc00f65c0
pnpbios: Entry = f0000:7d19 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
null: <null device, zero device>
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 40 00
00 01 7d 00 00 01 2b 01 00 01 3d 01 00 01 59 01
00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
VESA: 13 mode(s) found
VESA: v3.0, 8000k memory, flags:0x1, mode table:0xc06d2d20 (1000040)
VESA: Almador Graphics Chip Accelerated VGA BIOS
VESA: Intel Corporation Almador Graphics Controller Hardware Version 0.0
module_register_init: MOD_LOAD (splash_bmp, 0xc06ca8d0, 0) error 2
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000f904
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=35758086)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 30 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 30 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 30 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 30 D 0x63 3 4 5 6 7 9 10 11 12
embedded 2 0 A 0x62 3 4 5 7 9 10 11
embedded 2 0 B 0x63 3 4 5 7 9 10 11
embedded 2 0 C 0x69 3 4 5 7 9 10 11
embedded 2 1 A 0x68 3 4 5 7 9 10 11
slot 1 2 3 A 0x60 3 4 5 7 9 10 11
slot 1 2 3 B 0x6b 3 4 5 7 9 10 11
embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12
embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12
embedded 0 31 A 0x62 3 4 5 6 7 9 10 11 12
embedded 0 31 B 0x61 3 4 5 6 7 9 10 11 12
embedded 2 4 A 0x60 3 4 5 6 7 9 10 11 12
embedded 2 4 B 0x63 3 4 5 6 7 9 10 11 12
embedded 2 4 C 0x6a 3 4 5 6 7 9 10 11 12
embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12
embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12
embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12
AcpiOsDerivePciId: bus 2 dev 0 func 0
AcpiOsDerivePciId: bus 2 dev 0 func 1
AcpiOsDerivePciId: bus 0 dev 31 func 0
acpi0: Power Button (fixed)
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 8, width = 6
ACPI timer looks BAD min = 2, max = 10, width = 8
ACPI timer looks BAD min = 2, max = 5, width = 3
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks BAD min = 2, max = 9, width = 7
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_cmbat0: <Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.2.0
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.29.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 0.29.1
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.29.2
\\_SB_.PCI0.LPCB.LNKH irq 0: [ 3] low,level,sharable 0.29.3
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.31.0
\\_SB_.PCI0.LPCB.LNKB irq 9: [ 9] low,level,sharable 0.31.1
---- before setting priority for links ------------
\\_SB_.PCI0.LPCB.LNKH:
interrupts: 3
penalty: 1110
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LPCB.LNKH:
interrupts: 3
penalty: 1110
references: 1
priority: 1110
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.2.0
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 0.29.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 0.29.1
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.29.2
\\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 0.29.3
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 0.31.0
\\_SB_.PCI0.LPCB.LNKB irq 9: [ 9] low,level,sharable 0.31.1
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
pci0:0:0: setting power state D0
found-> vendor=0x8086, dev=0x3575, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2010, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:2:0: setting power state D0
map[10]: type 3, range 32, base e8000000, size 27, enabled
map[14]: type 1, range 32, base e0000000, size 19, enabled
pcib0: matched entry for 0.2.INTA (source \\_SB_.PCI0.LPCB.LNKA)
pcib0: slot 2 INTA is routed to irq 5
found-> vendor=0x8086, dev=0x3577, revid=0x04
bus=0, slot=2, func=0
class=03-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 1 supports D0 D1 D3 current D0
pci0:2:1: setting power state D0
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 1, range 32, base e0080000, size 19, enabled
found-> vendor=0x8086, dev=0x3577, revid=0x00
bus=0, slot=2, func=1
class=03-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x05 (1250 ns)
powerspec 1 supports D0 D1 D3 current D0
found-> vendor=0x8086, dev=0x2448, revid=0x42
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
pci0:31:0: setting power state D0
found-> vendor=0x8086, dev=0x248c, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
pci0:31:1: setting power state D0
map[10]: type 4, range 32, base 00000000, size 3, enabled
map[18]: type 4, range 32, base 00000000, size 3, enabled
map[20]: type 4, range 32, base 00001800, size 4, enabled
map[24]: type 1, range 32, base 00000000, size 10, memory disabled
found-> vendor=0x8086, dev=0x248a, revid=0x02
bus=0, slot=31, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
pci0:31:3: setting power state D0
map[20]: type 4, range 32, base 00001820, size 5, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x2483, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
pci0:31:5: setting power state D0
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 4, range 32, base 00001840, size 6, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x2485, revid=0x02
bus=0, slot=31, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
pci0:31:6: setting power state D0
map[10]: type 4, range 32, base 00002000, size 8, enabled
map[14]: type 4, range 32, base 00001880, size 7, enabled
pcib0: matched entry for 0.31.INTB (source \\_SB_.PCI0.LPCB.LNKB)
pcib0: slot 31 INTB is routed to irq 9
found-> vendor=0x8086, dev=0x2486, revid=0x02
bus=0, slot=31, func=6
class=07-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=9
agp0: <Intel 82830M (830M GMCH) SVGA controller> mem 0xe0000000-0xe007ffff,0xe8000000-0xefffffff irq 5 at device 2.0 on pci0
agp0: Bus reserved 0x8000000 bytes for rid 0x10 type 3 at 0xe8000000
agp0: Bus reserved 0x80000 bytes for rid 0x14 type 3 at 0xe0000000
agp0: detected 8060k stolen memory
agp0: aperture size is 128M
pci0: <display> at device 2.1 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pcib1: secondary bus 2
pcib1: subordinate bus 2
pcib1: I/O decode 0x3000-0x3fff
pcib1: memory decode 0xe0200000-0xe02fffff
pcib1: prefetched decode 0xe0500000-0xe05fffff
pcib1: Subtractively decoded bridge.
---- initial configuration ------------------------
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 2.0.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.0.1
\\_SB_.PCI0.LPCB.LNKF irq 0: [ 10] low,level,sharable 2.0.2
\\_SB_.PCI0.LPCB.LNKE irq 3: [ 3] low,level,sharable 2.1.0
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.3.0
\\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 2.3.1
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.4.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.4.1
\\_SB_.PCI0.LPCB.LNKG irq 5: [ 5] low,level,sharable 2.4.2
---- before setting priority for links ------------
\\_SB_.PCI0.LPCB.LNKF:
interrupts: 10
penalty: 710
references: 1
priority: 0
---- before fixup boot-disabled links -------------
\\_SB_.PCI0.LPCB.LNKF:
interrupts: 10
penalty: 710
references: 1
priority: 710
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPCB.LNKC irq 10: [ 10] low,level,sharable 2.0.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.0.1
\\_SB_.PCI0.LPCB.LNKF irq 10: [ 10] low,level,sharable 2.0.2
\\_SB_.PCI0.LPCB.LNKE irq 3: [ 3] low,level,sharable 2.1.0
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.3.0
\\_SB_.PCI0.LPCB.LNKH irq 3: [ 3] low,level,sharable 2.3.1
\\_SB_.PCI0.LPCB.LNKA irq 5: [ 5] low,level,sharable 2.4.0
\\_SB_.PCI0.LPCB.LNKD irq 10: [ 10] low,level,sharable 2.4.1
\\_SB_.PCI0.LPCB.LNKG irq 5: [ 5] low,level,sharable 2.4.2
pci2: <ACPI PCI bus> on pcib1
pci2: physical bus=2
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x1180, dev=0x0476, revid=0xaa
bus=2, slot=0, func=0
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base 00000000, size 12, enabled
found-> vendor=0x1180, dev=0x0476, revid=0xaa
bus=2, slot=0, func=1
class=06-07-00, hdrtype=0x02, mfdev=1
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
pci2:0:2: setting power state D0
map[10]: type 1, range 32, base e0202000, size 11, enabled
pcib1: device (null) requested decoded memory range 0xe0202000-0xe02027ff
pcib1: matched entry for 2.0.INTC (source \\_SB_.PCI0.LPCB.LNKF)
pcib1: slot 0 INTC is routed to irq 10
found-> vendor=0x1180, dev=0x0552, revid=0x02
bus=2, slot=0, func=2
class=0c-00-10, hdrtype=0x00, mfdev=1
cmdreg=0x0102, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns)
intpin=c, irq=10
powerspec 2 supports D0 D3 current D0
pci2:1:0: setting power state D0
map[10]: type 4, range 32, base 00003000, size 8, enabled
pcib1: device (null) requested decoded I/O range 0x3000-0x30ff
map[14]: type 1, range 32, base e0202800, size 8, enabled
pcib1: device (null) requested decoded memory range 0xe0202800-0xe02028ff
pcib1: matched entry for 2.1.INTA (source \\_SB_.PCI0.LPCB.LNKE)
pcib1: slot 1 INTA is routed to irq 3
found-> vendor=0x10ec, dev=0x8139, revid=0x10
bus=2, slot=1, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0107, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x20 (8000 ns), maxlat=0x40 (16000 ns)
intpin=a, irq=3
powerspec 2 supports D0 D1 D2 D3 current D0
pci2:3:0: setting power state D0
map[10]: type 3, range 32, base e0500000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xe0500000-0xe0500fff
pcib1: matched entry for 2.3.INTA (source \\_SB_.PCI0.LPCB.LNKA)
pcib1: slot 3 INTA is routed to irq 5
found-> vendor=0x1260, dev=0x3873, revid=0x01
bus=2, slot=3, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0117, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci2:4:0: setting power state D0
map[10]: type 1, range 32, base e0200000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xe0200000-0xe0200fff
pcib1: matched entry for 2.4.INTA (source \\_SB_.PCI0.LPCB.LNKA)
pcib1: slot 4 INTA is routed to irq 5
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=4, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
pci2:4:1: setting power state D0
map[10]: type 1, range 32, base e0201000, size 12, enabled
pcib1: device (null) requested decoded memory range 0xe0201000-0xe0201fff
pcib1: matched entry for 2.4.INTB (source \\_SB_.PCI0.LPCB.LNKD)
pcib1: slot 4 INTB is routed to irq 10
found-> vendor=0x1033, dev=0x0035, revid=0x43
bus=2, slot=4, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
pci2:4:2: setting power state D0
map[10]: type 1, range 32, base e0202c00, size 8, enabled
pcib1: device (null) requested decoded memory range 0xe0202c00-0xe0202cff
pcib1: matched entry for 2.4.INTC (source \\_SB_.PCI0.LPCB.LNKG)
pcib1: slot 4 INTC is routed to irq 5
found-> vendor=0x1033, dev=0x00e0, revid=0x04
bus=2, slot=4, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0116, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x84 (3960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
cbb0: <RF5C476 PCI-CardBus Bridge> at device 0.0 on pci2
pcib1: device cbb0 requested decoded memory range 0xe0200000-0xe02fffff
cbb0: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0202d00
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib1: matched entry for 2.0.INTA (source \\_SB_.PCI0.LPCB.LNKC)
pcib1: slot 0 INTA is routed to irq 10
cbb0: [MPSAFE]
cbb0: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700aa 0x00824000
0x10: 0xe0202000 0x020000dc 0x20020100 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0400010a
0x40: 0x102913bd 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x102913bd 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
cbb1: <RF5C476 PCI-CardBus Bridge> at device 0.1 on pci2
pcib1: device cbb1 requested decoded memory range 0xe0200000-0xe02fffff
cbb1: Lazy allocation of 0x1000 bytes rid 0x10 type 3 at 0xe0203d00
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib1: matched entry for 2.0.INTB (source \\_SB_.PCI0.LPCB.LNKD)
pcib1: slot 0 INTB is routed to irq 10
cbb1: [MPSAFE]
cbb1: PCI Configuration space:
0x00: 0x04761180 0x02100007 0x060700aa 0x00824000
0x10: 0xe0203000 0x020000dc 0x20040300 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0400020a
0x40: 0x102913bd 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x00a00001 0x00000000 0x04630463 0x00000000
0x90: 0x00000000 0x00000000 0x00000000 0x00000000
0xa0: 0x00000000 0x00000000 0x00000000 0x00000000
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x102913bd 0x00000000 0x00000000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0xfe0a0001
0xe0: 0x24c04000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
fwohci0: <Ricoh R5C552> mem 0xe0202000-0xe02027ff irq 10 at device 0.2 on pci2
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 0 -> 8.
fwohci0: Bus reserved 0x800 bytes for rid 0x10 type 3 at 0xe0202000
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
fwohci0: OHCI version 0.0 (ROM=0)
fwohci0: invalid OHCI version
fwohci0: FireWire init failed with err=6
device_probe_and_attach: fwohci0 attach returned 5
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
rl0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x3000
rl0: <RealTek 8139 10/100BaseTX> port 0x3000-0x30ff mem 0xe0202800-0xe02028ff irq 3 at device 1.0 on pci2
pcib1: device rl0 requested decoded I/O range 0x3000-0x30ff
rl0: Ethernet address: 08:00:1f:b1:3b:fb
miibus0: <MII bus> on rl0
rlphy0: <RealTek internal media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
rl0: bpf attached
wi0: <Intersil Prism2.5> mem 0xe0500000-0xe0500fff irq 5 at device 3.0 on pci2
wi0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0500000
wi0: 802.11 address: 00:d0:59:44:a7:4d
wi0: using RF:PRISM2.5 MAC:ISL3874A(Mini-PCI)
wi0: Intersil Firmware: Primary (1.1.0), Station (1.4.3)
wi0: bpf attached
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
ohci0: <NEC uPD 9210 USB controller> mem 0xe0200000-0xe0200fff irq 5 at device 4.0 on pci2
ohci0: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0200000
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 1 port with 1 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xe0201000-0xe0201fff irq 10 at device 4.1 on pci2
ohci1: Bus reserved 0x1000 bytes for rid 0x10 type 3 at 0xe0201000
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 1 port with 1 removable, self powered
ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xe0202c00-0xe0202cff irq 5 at device 4.2 on pci2
ehci0: Bus reserved 0x100 bytes for rid 0x10 type 3 at 0xe0202c00
ehci_pci_attach: companion usb0
ehci_pci_attach: companion usb1
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
usb2: EHCI version 0.0
usb2: wrong number of companions (0 != 2)
ehci0: USB init failed err=13
device_probe_and_attach: ehci0 attach returned 5
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port 0x1800-0x180f at device 31.1 on pci0
atapci0: Bus reserved 0x10 bytes for rid 0x20 type 4 at 0x1800
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
ichsmb0: <Intel 82801CA (ICH3) SMBus controller> port 0x1820-0x183f irq 9 at device 31.3 on pci0
ichsmb0: Bus reserved 0x20 bytes for rid 0x20 type 4 at 0x1820
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
pcm0: <Intel ICH3 (82801CA)> port 0x1840-0x187f,0x1c00-0x1cff irq 9 at device 31.5 on pci0
pcm0: Bus reserved 0x100 bytes for rid 0x10 type 4 at 0x1c00
pcm0: Bus reserved 0x40 bytes for rid 0x14 type 4 at 0x1840
pcm0: <Avance Logic ALC200 AC97 Codec (id = 0x414c4710)>
pcm0: Codec features headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, Realtek 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, reserved 1, AMAP, reserved 4
pcm0: sndbuf_setmap 210000, 4000; 0xe0216000 -> 210000
pcm0: sndbuf_setmap 220000, 4000; 0xe021a000 -> 220000
pci0: <simple comms> at device 31.6 (no driver attached)
pci0:31:6: setting power state D3
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Synaptics Touchpad, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 02 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
Timecounter "TSC" frequency 996683179 Hz quality 800
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to accept, logging unlimited
IPv6 packet filtering initialized, default to accept, unlimited logging
lo0: bpf attached
acpi_cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
cbb0: Unsupported card type detected
cbb1: Unsupported card type detected
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on Intel ICH3 chip
ata0-master: setting UDMA100 on Intel ICH3 chip
GEOM: create disk ad0 dp=0xc43df760
ad0: <HITACHI_DK23EA-60/00K2A0A1> ATA-5 disk at ata0-master
ad0: 57231MB (117210240 sectors), 116280 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
pcm0: measured ac97 link rate at 48000 Hz
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:20482812
[1] f:00 typ:15 s(CHS):1023/0/1 e(CHS):1023/254/63 s:20482875 l:10699290
[2] f:80 typ:165 s(CHS):1023/0/1 e(CHS):1023/254/63 s:31182165 l:43006005
[3] f:00 typ:169 s(CHS):1023/0/1 e(CHS):1023/254/63 s:74188170 l:43022070
GEOM: Configure ad0s1, start 32256 length 10487199744 end 10487231999
GEOM: Configure ad0s2, start 10487232000 length 5478036480 end 15965268479
GEOM: Configure ad0s3, start 15965268480 length 22019074560 end 37984343039
GEOM: Configure ad0s4, start 37984343040 length 22027299840 end 60011642879
MBREXT Slice 5 on ad0s2:
[0] f:00 typ:120 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:16002
[1] f:00 typ:5 s(CHS):1023/0/1 e(CHS):1023/254/63 s:16065 l:10683225
GEOM: Configure ad0s5, start 32256 length 8193024 end 8225279
MBREXT Slice 6 on ad0s2:
[0] f:00 typ:11 s(CHS):1023/1/1 e(CHS):1023/254/63 s:63 l:10683162
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s6, start 8257536 length 5469778944 end 5478036479
GEOM: Configure ad0s3a, start 0 length 2147483648 end 2147483647
GEOM: Configure ad0s3b, start 2147483648 length 1610612736 end 3758096383
GEOM: Configure ad0s3c, start 0 length 22019074560 end 22019074559
GEOM: Configure ad0s3d, start 3758096384 length 8589934592 end 12348030975
GEOM: Configure ad0s3e, start 12348030976 length 4294967296 end 16642998271
GEOM: Configure ad0s3f, start 16642998272 length 5376076288 end 22019074559
GEOM: Configure vol/root, start 0 length 2147483648 end 2147483647
GEOM: Configure vol/usr, start 0 length 8589934592 end 8589934591
GEOM: Configure vol/var, start 0 length 4294967296 end 4294967295
Mounting root from ufs:/dev/ad0s3a
start_init: trying /sbin/init
More information about the freebsd-mobile
mailing list