hostap TX fix in 5.x

[Scott Pilz]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1


	11mbit/half duplex 802.11b.. I've seen speeds at around
600KBytes/sec (4.6mbit/sec) which is about the best you can do - and isn't
bad by any means. As I explained below, the problem is with FBSD 5.X (all
the way to CURRENT), where I'm seeing the speeds drop from what they were
in 4.x to around 180KBytes/sec (or 1.4mbit/sec).


	Scott

On Thu, 29 Apr 2004, Brian Fundakowski Feldman wrote:

> Scott Pilz <scottp at tznet.com> wrote:
> > 	Has anyone found a fix for this problem yet?
> >
> > Affects: In FreeBSD-5.x / Current
> > Card Used: Prism 2.5, tried all firmware (from 1.3.9 to 1.7.2)
> >
> > While the interface (wi driver) is set to hostap, associated clients can
> > upload at 11mbit/sec but download a maximum at half of that (I'm seeing a
> > maximum being around 180KB/sec).
>
> I think you need to reevaluate testing procedures; there is no way you could
> be getting remotely close to 11mbit/s speeds.  Please provide more accurate
> figures for comparison or it's hard to guess what might be "wrong".
>
> --
> Brian Fundakowski Feldman                           \'[ FreeBSD ]''''''''''\
>   <> green at FreeBSD.org                               \  The Power to Serve! \
>  Opinions expressed are my own.                       \,,,,,,,,,,,,,,,,,,,,,,\
>
>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.4 (FreeBSD)

iD8DBQFAkRFH2REUg6gjWxgRAnG5AKDA4cDQxmSire/jqsh0b3hzkPgV4QCcCwc5
v+hY8uEoPTzNWraeDaTLNn8=
=MFcP
-----END PGP SIGNATURE-----