What do you think of the new 3COM cards with X-Jack ?

[Andreas Klemm]

Hi Warner,

somebody mentioned a "sio" patch from you which was required
to get his PCMCIA card to work via newbus.

Where are these patches available ?
Do you think these patches could help me ?
When do you think you'll committ them to -current ?

Maybe you already saw my report on -current.

The 3COM 3CCFE575BT doesn't work, is recognized but there
are errors popping up:

+----------------------------------------------------------------------
I tried now two -current snaps from:
- 2003-08-24
- 2003-09-08
 
In both snaps the card is recognized on boot. but cardbus
can't be activated.
 
In -current from 2003-09-08 boot messages:
 
cbb0: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib0: slot 11 INTA is routed to irq 11
cbb0: [MPSAFE]
cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pcib0: slot 11 INTB is routed to irq 11
cbb1: [MPSAFE]
[...]
pccard0: Allocation failed for cfe 0
[...]
cardbus1: Resource not specified in CIS: id=14, size=80
cardbus1: Resource not specified in CIS: id=18, size=80
xl0: <3Com 3c575B Fast Etherlink XL> port 0x1000-0x107f mem
0x88003000-0x8800307f,0x88003080-0x880030ff irq 11 at device 0.0 on cardbus1
xl0: reset didn't complete
xl0: command never completed!
xl0: command never completed!
xl0: eeprom failed to come ready
xl0: failed to read station address
device_probe_and_attach: xl0 attach returned 6
cbb1: CardBus card activation failed
[...]

I tried the 3COM Card in the PCMCIA Slot cbb0 as well on
my Toshiba Satellite PRO 4360. No difference.
+----------------------------------------------------------------------

	Andreas ///

-- 
Andreas Klemm - Powered by FreeBSD 5.1-CURRENT
Need a magic printfilter today ? -> http://www.apsfilter.org/