PCCARD on Toshiba Satellite 5100 (5105)

[Bruce Mackay]

On Tue, 07 Oct 2003 10:19:52 +0200
Gabriele Cecchetti <gabriele at ing.unipi.it> wrote:

> I've istalled 5.1-RELEASE on Toshiba Satellite 5100-503 (the European 
> model of Satellite 5105...)
> When I boot I get the following messages:
> 
> ...
> cbb0: <TI1410 PCI-CardBus Bridge> at device 10.0 on pci2
> cardbus0: <CardBus bus> on cbb0
> pccard0: <16-bit PCCard bus> on cbb0
> pcib2: slot 10 INTA is routed to irq 10
> cbb0: bad Vcc request. ctrl=0xffffff88, status=0xffffffff
> cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
> cbb1: <ToPIC100 PCI-CardBus Bridge> at device 11.0 on pci2
> cardbus1: <CardBus bus> on cbb1
> pccard1: <16-bit PCCard bus> on cbb1
> pcib2: slot 11 INTA is routed to irq 11
> cbb1: bad Vcc request. ctrl=0xffffff88, status=0xffffffff
> cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
> cbb2: <ToPIC100 PCI-CardBus Bridge> at device 11.1 on pci2
> cardbus2: <CardBus bus> on cbb2
> pccard2: <16-bit PCCard bus> on cbb2
> pcib2: slot 11 INTB is routed to irq 10
> cbb2: bad Vcc request. ctrl=0xffffff88, status=0xffffffff
> cbb_power: CARD_VCC_0V and CARD_VPP_0V [44]
> ...
> 
> So the cardbus did not get inizialized well and I cannot see
> my wireless card and my CF card.
> 
> Any Suggestion ?
> 
> Thanks in Advance.
> Gabriele
> 

Hey Gabriele,

   I have toshiba myself and I was having, I believe, a similar problem to you.  I installed 5.1-RELEASE and wireless card would not work and I got the errors above.  I resolved it by updating to -CURRENT.  You can try that.  I did my get on Saturday October 4th.

   Now, I am no expert and there may be an easier way to do it.  If not you can give it a shot.  Now if I could just get my sound card working....

Bruce