PCMCIA NIC and Inet connection

Sat May 24 13:43:45 PDT 2003

Here is the requested information, hope it helps as I have exhausted 
searching on www.freebsd.org/search/

rc.conf
# -- sysinstall generated deltas -- # Wed May 21 22:30:25 2003
# Created: Wed May 21 22:30:25 2003
# Enable network daemons for user convenience.
# Please make all changes to this file, not to /etc/defaults/rc.conf.
# This file now contains just the overrides from /etc/defaults/rc.conf.
kern_securelevel_enable="NO"
linux_enable="YES"
moused_enable="YES"
nfs_reserved_port_only="YES"
saver="daemon"
sendmail_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
pccard_enable="YES"
----------------------------------------------
DMESG

thugged# dmesg
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 4.8-RELEASE #0: Thu Apr  3 10:53:38 GMT 2003
    root at freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 2.00GHz (1993.54-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7

Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory  = 266797056 (260544K bytes)
config> di bt0
config> di aic0
config> di aha0
config> di adv0
config> q
avail memory = 254357504 (248396K bytes)
pnpbios: Bad PnP BIOS data checksum
Preloaded elf kernel "kernel" at 0xc051d000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc051d09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 9 entries at 0xc00fdf30
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82845 (i845 GMCH) SVGA controller> mem 
0xe0000000-0xe007ffff,0xf0000000-0xf7ffffff irq 10 at device 2.0 on pci0
agp0: detected 892k stolen memory
agp0: aperture size is 128M
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0x1cc0-0x1cdf irq 10 
at device 29.0 on pci0
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0x1ce0-0x1cff irq 11 
at device 29.1 on pci0
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 10
pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
pci2: <PCI bus> on pcib1
pci2: <unknown card> (vendor=0x14e4, dev=0x4401) at 1.0 irq 10
pcic0: <TI PCI-1510 PCI-CardBus Bridge> irq 10 at device 4.0 on pci2
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI12XX PCI Config Reg: [pwr save][FUNC pci int + CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
isab0: <PCI to ISA bridge (vendor=8086 device=24c0)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 ATA100 controller> port 
0x2020-0x202f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x24c3) at 31.3 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24c5) at 31.5 irq 10
pci0: <unknown card> (vendor=0x8086, dev=0x24c6) at 31.6 irq 10
orm0: <Option ROMs> at iomem 
0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xce7ff,0xdf800-0xdffff,0xe0000-0xe3fff 
on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ad2: 28615MB <HITACHI_DK23EA-30> [58140/16/63] at ata1-master UDMA100
acd0: CD-RW <HL-DT-STCD-RW/DVD-ROM GCC-4240N> at ata0-master PIO4
Mounting root from ufs:/dev/ad2s3a
pccard: card inserted, slot 0
pccard: card removed, slot 0
pccard: card inserted, slot 0
ed1 at port 0x300-0x31f irq 10 flags 0x80000 slot 0 on pccard0
ed1: address 00:04:5a:09:dd:00, type Linksys (16 bit)
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
thugged#
----------------------------------------------------------------------------
/boot/kernel.conf

di bt0
di aic0
di aha0
di adv0
q
--------------------------------------------------------------------------
****Note kernel.conf doesnt mention ed1***  what does this mean?

Thanks for taking the time to check out my problem :)

>From: "Kevin Oberman" <oberman at es.net>
>To: "Nucking Futs" <nuckingfutsto at hotmail.com>
>Subject: Re: PCMCIA NIC and Inet connection Date: Fri, 23 May 2003 20:41:33 
>-0700
>
> > From: "Nucking Futs" <nuckingfutsto at hotmail.com>
> > Date: Fri, 23 May 2003 19:02:06 -0400
> > Sender: owner-freebsd-mobile at freebsd.org
> >
> >    I have installed FBSD 4.8 on my Dell notebook Inspiron 1100. The 
>internal
> > NIC is not recognized at all (best as I can tell) so I am trying to use 
>a
> > PCMCIA Linksys model PCM100 PC card. The card is on the supported 
>hardware
> > list found here
> > http://www.freebsd.org/releases/4.8R/hardware-i386.html#ETHERNET As you
> > might has guessed I'm writing because I cant get the card to function
> > correctly. During a normal install of FBSD on a workstation with a PCI 
>NIC
> > the DHCP scan finds the Road Runner connection from my router 
>automatically
> > and I'm set up with internet connectivity, end of story.
> >
> >   The PCMCIA card was not recognized during install so after reading an
> > archive I added pccard_enable="YES" to /etc/rc.conf.  This made the card 
>to
> > be recognized during boot up with a "Beep." I then went  back into the 
>post
> > install configuration via /stand/sysinstall and attempted to configure
> > additional network interfaces and when doing so the choice "ed1 <3C503
> > compatible PCMCIA>" showed up.  I let it automatically configure DHCP 
>and it
> > found my connection and  I had internet connectivity!  After a reboot I 
>had
> > no internet connectivity again.  In order to get connectivity again I 
>had to
> > go to /etc/rc.conf and delete the line ifconfig_ed1="DHCP" and
> > hostname="hostname" and go through the automatic configuration which i
> > described above.  Again if I reboot I lose inet connectivity.  What do I
> > need to add or do differently to make this work?  Thanks in advance for 
>any
> > assistance.
>
>There are a few details missing that would help.
>1. dmesg
>2. rc.conf
>
>I see you are configuring ed1. Unless you have another ed interface, it
>should be ed0. What is the device line for ed in you kernel config?  It
>should probably be just"device ed" since PCCards are basically PCI
>devices and the the configuration for the device in the GENERIC kernel
>is for an ISA device.
>
>Once this is done, the card should become ed0 and the rc.conf line
>should be changed to ifconfig_ed0="DHCP".
>
>Also, if you extract and reinsert the card, what happens? (Same effect
>can be achieved with "pccardc power 0 0;sleep 10;pccardc power 0 1" (This
>assumes that you are plugging the card into slot 0, normally the upper
>slot.) The output could be very useful.
>
>Hope all of this helps.
>
>R. Kevin Oberman, Network Engineer
>Energy Sciences Network (ESnet)
>Ernest O. Lawrence Berkeley National Laboratory (Berkeley Lab)
>E-mail: oberman at es.net			Phone: +1 510 486-8634

_________________________________________________________________
Add photos to your messages with MSN 8. Get 2 months FREE*.  
http://join.msn.com/?page=features/featuredemail