orinoco wavelan (bronze) and vadem isa pcmcia bridge woes?

[Alexi Papaleonardos]

Trying to get the orinoco wavelan and an old vadem ISA-PCMCIA bridge to work
under 5.1-RELEASE.  It bears noting that the whole thing worked wonderfully
under 4.0-RELEASE with the exact same hardware.  I'm not nearly well-versed
enough in NEWCARD to understand what's going on here, but below is the dmesg
(with pcmcia debugging flag on in /boot/loader.conf).  If anyone has any
ideas that would be great!
Thanks,
Alexi.

Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-RELEASE #0: Fri Jun 13 00:55:00 GMT 2003
    root at ajiao.alexi.us:/usr/src/sys/i386/compile/AJIAO-FW
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0693000.
Timecounter "i8254"  frequency 1193182 Hz
Timecounter "TSC"  frequency 167046444 Hz
CPU: Pentium/P55C (167.05-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x544  Stepping = 4
  Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory  = 41943040 (40 MB)
avail memory = 33796096 (32 MB)
bios32: Bad BIOS32 Service Directory
Intel Pentium detected, installing workaround for F00F bug
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 10.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 15.0 on pci0
isa0: <ISA bus> on isab0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 at port 0x3e0 iomem 0xd0000-0xd1fff irq 3 on isa0
pcic0: controller 0 (Intel 82365SL Revision 1) has sockets A and B
pcic0: controller 1 (Intel 82365SL Revision 1) has socket A only
pccard0: <16-bit PCCard bus> on pcic0
pccard1: <16-bit PCCard bus> on pcic0
pccard2: <16-bit PCCard bus> on pcic0
pcic0: bus_space_alloc range 0x0330-0x03ff (probed)
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA (mono) <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3b0-0x3cf iomem 0xa0000-0xbffff on isa0
ep0: <3Com 3C509-TP EtherLink III> at port 0x300-0x30f irq 10 on isa0
ep0: Ethernet address 00:20:af:26:3f:c5
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0501> can't assign resources (irq)
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <PNP0303> can't assign resources (port)
Timecounters tick every 10.000 msec
ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to
deny, logging limited to 100 packets/entry by default
pccard2: 80 READY
ad0: 810MB <QUANTUM TRB850A> [1646/16/63] at ata0-master PIO4
Mounting root from ufs:/dev/ad0s1a
pccard1: 40 CD af
pccard1: enqueing INSERTION event
pccard2: 80 READY
pccard1: insertion event
pccard1: pcic_chip_socket_enable cardtype mem 40
pcic_chip_mem_map window 0 bus 0+0+400 at card addr 0
pcic_chip_do_mem_map window 0: 0000 8000 0000
pcic_chip_do_mem_map window 0: 00d2 80d2 4000
cis mem map c00d2000
pccard1: CIS tuple chain:
CISTPL_DEVICE type=null speed=null
 01 03 00 00 ff
CISTPL_DEVICE_A type=sram speed=ext
 17 04 67 5a 08 ff
unhandled CISTPL 1d
 1d 05 01 67 5a 08 ff
CISTPL_VERS_1
 15 50 05 00 4c 75 63 65 6e 74 20 54 65 63 68 6e
 6f 6c 6f 67 69 65 73 00 57 61 76 65 4c 41 4e 2f
 49 45 45 45 00 56 65 72 73 69 6f 6e 20 30 31 2e
 30 31 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 ff
CISTPL_MANFID
 20 04 56 01 02 00
CISTPL_FUNCID
 21 02 06 00
CISTPL_FUNCE
 22 02 01 07
CISTPL_FUNCE
 22 05 02 40 42 0f 00
CISTPL_FUNCE
 22 05 02 80 84 1e 00
CISTPL_FUNCE
 22 02 03 07
CISTPL_FUNCE
 22 08 04 06 00 60 1d 04 a7 ab
CISTPL_FUNCE
 22 02 05 01
CISTPL_CONFIG
 1a 07 03 01 e0 03 00 00 01
CISTPL_CFTABLE_ENTRY
 1b 0f c1 01 19 76 c5 4b d5 19 36 36 05 46 7f ff
 ff
CISTPL_END
 ff
pcic_chip_do_mem_map window 0: 00d2 80d2 4000
cis mem map c00d2000
CISTPL_LINKTARGET expected, code 01 observed
pcic_chip_io_alloc map port 180+40
pccard1: Allocation failed for cfe 1
pccard1: pcic_chip_socket_enable cardtype mem 40
pccard1: No config entry could be allocated.