mini-PCI Cards dont work
Torsten Kötting
Amnesia at t-online.de
Sun Jun 8 04:44:57 PDT 2003
Hi there,
i installed RC5.1 on my laptop 1 week ago. It works fine so far but the
mini-PCI wlan card doesnt work.
Its a Cisco Aironet 350. The driver does find the card but when I activate
its interface an0 I get a timeout message, the cpu-load jumps to 100% and I
need to reset the laptop. After checking several mailarchives and trying
older firmwares for the MPI350 without having any success I thought I give
up on the MPI350 and buy an Orinoco wlan card, again MiniPCI. I was sure I
have solved my probs now but I was wrong. Exactly the same problem appears
now with the Orinoco Card. The Driver finds it, after activating the wi0
interface the system crashes.
I dont know what to do now :/ both card work fine in the XP-Installation on
the same laptop, but I finally wanted to get rid of windows and installing
FreeBSD was supposed to be the final attempt. Its a Gericom laptop build on
standart desktop hardware, SIS645DX chipset. I compiled a new kernel with a
mini-configuration but it didnt help.
Please help ...
.. thanks in advance
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #1: Sat Jun 7 21:18:51 GMT 2003
root at smoke.phibes.net:/usr/src/sys/i386/compile/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0727000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0727294.
Calibrating clock(s) ... i8254 clock: 1193127 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
Calibrating TSC clock ... TSC clock: 2141110188 Hz
Timecounter "TSC" frequency 2141110188 Hz
CPU: Intel(R) Pentium(R) 4 CPU 2.53GHz (2141.11-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf27 Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA
,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 534708224 (509 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x000000000074e000 - 0x000000001f4d2fff, 517492736 bytes (126341 pages)
avail memory = 511643648 (487 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f69c0
bios32: Entry = 0xfd880 (c00fd880) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xfd880+0x138
pnpbios: Found PnP BIOS data at 0xc00f6a20
pnpbios: Entry = f0000:a964 Rev = 1.0
Other BIOS signatures found:
wlan: <802.11 Link Layer>
null: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <PTLTD RSDT > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80001504
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=06461039)
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fdf40
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 5 A 0x43 3 4 5 9 10 11 15
slot 1 0 5 B 0x44 3 4 5 9 10 11 15
slot 2 0 6 A 0x44 3 4 5 9 10 11 15
embedded 0 10 A 0x42 3 4 5 6 7 9 10 11 12 14 15
embedded 0 1 A 0x41 3 4 5 6 9 10 11 15
embedded 0 1 B 0x42 3 4 5 6 9 10 11 15
embedded 0 2 A 0x41 3 4 5 9 10 11 15
embedded 0 2 B 0x42 3 4 5 9 10 11 15
embedded 0 2 C 0x43 3 4 5 9 10 11 15
embedded 0 2 D 0x44 3 4 5 9 10 11 15
embedded 0 3 A 0x60 3 4 5 9 10 11 15
embedded 0 3 B 0x61 3 4 5 9 10 11 15
embedded 0 3 C 0x62 3 4 5 9 10 11 15
embedded 0 3 D 0x63 3 4 5 9 10 11 15
embedded 0 4 A 0x44 3 4 5 9 10 11 15
AcpiOsDerivePciId: bus 0 dev 2 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 4, width = 2
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 4, width = 2
Timecounter "ACPI-fast" frequency 3579545 Hz
AcpiOsDerivePciId: bus 0 dev 0 func 0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.1.1
\\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.2.1
\\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.2.2
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.2.3
\\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0
\\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1
\\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2
\\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.4.0
\\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.5.0
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.5.1
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.6.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.10.0
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.1.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.1.1
\\_SB_.PCI0.LPC_.LNKA irq 3: [ 5 10 11] low,level,sharable 0.2.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.2.1
\\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.2.2
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.2.3
\\_SB_.PCI0.LPC_.LNKE irq 9: [ 4 5 10 11] low,level,sharable 0.3.0
\\_SB_.PCI0.LPC_.LNKF irq 11: [ 4 5 10 11] low,level,sharable 0.3.1
\\_SB_.PCI0.LPC_.LNKG irq 10: [ 4 5 10 11] low,level,sharable 0.3.2
\\_SB_.PCI0.LPC_.LNKH irq 5: [ 4 5 10 11] low,level,sharable 0.3.3
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.4.0
\\_SB_.PCI0.LPC_.LNKC irq 9: [ 3 4 5 9 10 11] low,level,sharable 0.5.0
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.5.1
\\_SB_.PCI0.LPC_.LNKD irq 11: [ 3 4 5 7 9 10 11] low,level,sharable
0.6.0
\\_SB_.PCI0.LPC_.LNKB irq 4: [ 3 4 5 7 9 10 11] low,level,sharable
0.10.0
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 1, range 32, base e0000000, size 27, enabled
found-> vendor=0x1039, dev=0x0646, revid=0x00
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0001, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0000, cachelnsz=0 (dwords)
lattimer=0x63 (2970 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x1039, dev=0x0008, revid=0x04
bus=0, slot=2, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 1, range 32, base e8004000, size 12, enabled
pcib0: matched entry for 0.2.INTB (source \\_SB_.PCI0.LPC_.LNKB)
pcib0: slot 2 INTB is routed to irq 4
found-> vendor=0x1039, dev=0x7007, revid=0x00
bus=0, slot=2, func=3
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x0c (3000 ns)
intpin=b, irq=4
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 000001f0, size 3, enabled
map[14]: type 4, range 32, base 000003f4, size 2, enabled
map[18]: type 4, range 32, base 00000170, size 3, enabled
map[1c]: type 4, range 32, base 00000374, size 2, enabled
map[20]: type 4, range 32, base 00002400, size 4, enabled
found-> vendor=0x1039, dev=0x5513, revid=0x00
bus=0, slot=2, func=5
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0200, cachelnsz=0 (dwords)
lattimer=0x80 (3840 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
map[10]: type 4, range 32, base 00001400, size 8, enabled
map[14]: type 4, range 32, base 00001080, size 7, enabled
pcib0: matched entry for 0.2.INTC (source \\_SB_.PCI0.LPC_.LNKC)
pcib0: slot 2 INTC is routed to irq 9
found-> vendor=0x1039, dev=0x7012, revid=0xa0
bus=0, slot=2, func=7
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=c, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base e8005000, size 12, enabled
pcib0: matched entry for 0.3.INTA (source \\_SB_.PCI0.LPC_.LNKE)
pcib0: slot 3 INTA is routed to irq 9
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=a, irq=9
map[10]: type 1, range 32, base e8006000, size 12, enabled
pcib0: matched entry for 0.3.INTB (source \\_SB_.PCI0.LPC_.LNKF)
pcib0: slot 3 INTB is routed to irq 11
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=b, irq=11
map[10]: type 1, range 32, base e8007000, size 12, enabled
pcib0: matched entry for 0.3.INTC (source \\_SB_.PCI0.LPC_.LNKG)
pcib0: slot 3 INTC is routed to irq 10
found-> vendor=0x1039, dev=0x7001, revid=0x0f
bus=0, slot=3, func=2
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=c, irq=10
map[10]: type 1, range 32, base e8008000, size 12, enabled
pcib0: matched entry for 0.3.INTD (source \\_SB_.PCI0.LPC_.LNKH)
pcib0: slot 3 INTD is routed to irq 5
found-> vendor=0x1039, dev=0x7002, revid=0x00
bus=0, slot=3, func=3
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0002, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x50 (20000 ns)
intpin=d, irq=5
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000f800, size 8, enabled
map[14]: type 1, range 32, base e8009000, size 12, enabled
pcib0: matched entry for 0.4.INTA (source \\_SB_.PCI0.LPC_.LNKD)
pcib0: slot 4 INTA is routed to irq 11
found-> vendor=0x1039, dev=0x0900, revid=0x91
bus=0, slot=4, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0xad (5190 ns), mingnt=0x34 (13000 ns), maxlat=0x0b (2750 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 00001c00, size 8, enabled
map[14]: type 1, range 32, base e8000000, size 14, enabled
map[18]: type 1, range 32, base e8400000, size 22, enabled
pcib0: matched entry for 0.5.INTA (source \\_SB_.PCI0.LPC_.LNKC)
pcib0: slot 5 INTA is routed to irq 9
found-> vendor=0x14b9, dev=0xa504, revid=0x00
bus=0, slot=5, func=0
class=02-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x001b, statreg=0x0090, cachelnsz=4 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x04 (1000 ns)
intpin=a, irq=9
powerspec 2 supports D0 D1 D2 D3 current D0
pcib0: matched entry for 0.10.INTA (source \\_SB_.PCI0.LPC_.LNKB)
pcib0: slot 10 INTA is routed to irq 4
found-> vendor=0x1524, dev=0x1410, revid=0x00
bus=0, slot=10, func=0
class=06-07-00, hdrtype=0x02, mfdev=0
cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0xc0 (48000 ns), maxlat=0x03 (750 ns)
intpin=a, irq=4
powerspec 1 supports D0 D1 D2 D3 current D0
agp0: <SIS Generic host to PCI bridge> mem 0xe0000000-0xe7ffffff at device
0.0 on pci0
agp0: allocating GATT for aperture of size 128M
pcib1: <PCIBIOS PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xe8800000-0xe88fffff
pcib1: prefetched decode 0xf0000000-0xf7ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base f0000000, size 27, enabled
map[14]: type 4, range 32, base 00009000, size 8, enabled
map[18]: type 1, range 32, base e8800000, size 16, enabled
pci_cfgintr: can't route an interrupt to 1:0 INTA
found-> vendor=0x1002, dev=0x4c66, revid=0x01
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0283, statreg=0x02b0, cachelnsz=4 (dwords)
lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
fwohci0: vendor=1039, dev=7007
fwohci0: <1394 Open Host Controller Interface> mem 0xe8004000-0xe8004fff irq
4 at device 2.3 on pci0
fwohci0: latency timer 64 -> 64.
fwohci0: cache size 0 -> 8.
fwohci0: OHCI version 1.0 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:50:eb:1d:00:00:22:d5
fwohci0: resetting OHCI...done (loop=0)
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf864a002 -> 0xf864a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
if_fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:50:eb:00:22:d5
fwe0: bpf attached
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: loop=1, retry=0
fwohci0: fwphy_rddata: loop=1, retry=0
atapci0: <SiS 96X UDMA133 controller> port
0x2400-0x240f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 2.5
on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: after reset mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=51 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=10 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
pci0: <multimedia, audio> at device 2.7 (no driver attached)
ohci0: <SiS 5571 USB controller> mem 0xe8005000-0xe8005fff irq 9 at device
3.0 on pci0
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <SiS 5571 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1: <SiS 5571 USB controller> mem 0xe8006000-0xe8006fff irq 11 at device
3.1 on pci0
usb1: OHCI version 1.0, legacy support
usb1: SMM does not respond, resetting
usb1: <SiS 5571 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci2: <SiS 5571 USB controller> mem 0xe8007000-0xe8007fff irq 10 at device
3.2 on pci0
usb2: OHCI version 1.0, legacy support
usb2: SMM does not respond, resetting
usb2: <SiS 5571 USB controller> on ohci2
usb2: USB revision 1.0
uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 3.3 (no driver attached)
sis0: <SiS 900 10/100BaseTX> port 0xf800-0xf8ff mem 0xe8009000-0xe8009fff
irq 11 at device 4.0 on pci0
sis0: Ethernet address: 00:50:eb:1d:26:b5
miibus0: <MII bus> on sis0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sis0: bpf attached
an0: <Cisco Aironet MPI350> port 0x1c00-0x1cff mem
0xe8400000-0xe87fffff,0xe8000000-0xe8003fff irq 9 at device 5.0 on pci0
an0: got RSSI <-> dBM map
an0: Ethernet address: 00:07:50:d5:78:d0
an0: supported rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: bpf attached
cbb0: <PCI-CardBus Bridge> irq 4 at device 10.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: PCI Configuration space:
0x00: 0x14101524 0x02100007 0x06070000 0x00022000
0x10: 0x88000000 0x020000a0 0x20000000 0xfffff000
0x20: 0x00000000 0xfffff000 0x00000000 0xfffffffc
0x30: 0x00000000 0xfffffffc 0x00000000 0x0740010b
0x40: 0xb7321019 0x00000001 0x00000000 0x00000000
0x50: 0x00000000 0x00000000 0x00000000 0x00000000
0x60: 0x00000000 0x00000000 0x00000000 0x00000000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000
0x80: 0x0c44d021 0x00000000 0x00000000 0x000c1002
0x90: 0x404482c0 0x00000000 0x00000000 0x00000000
0xa0: 0xfe010001 0x00c00100 0x00000000 0x00000009
0xb0: 0x00000000 0x00000000 0x00000000 0x00000000
0xc0: 0x00001000 0x00800080 0x10080000 0x00000000
0xd0: 0x00000000 0x00000000 0x00000000 0x00000000
0xe0: 0x00000000 0x00000000 0x00000000 0x00000000
0xf0: 0x00000000 0x00000000 0x00000000 0x00000000
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: unable to allocate IRQ
psmcpnp0 irq 12 on acpi0
psm0: current command byte:0067
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:c0, syncbits:00
acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
acpi_acad0: <AC adapter> on acpi0
acpi_cmbat0: <Control method Battery> on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd0000-0xd7fff,0xc0000-0xcefff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0: cannot reserve I/O port range (6 ports)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 at port 0x3e0 iomem 0xa0000-0xa1fff irq 3 on isa0
pcic ident regs: 0xff 0xff 0xff 0xff
pcic_attach: attach found no sockets
device_probe_and_attach: pcic0 attach returned 6
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x801 0x801 0x801 0x801
sio0: probe failed test(s): 0 1 2 4 6 7 9
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x801 0x801 0x801 0x801
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this
adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 6f 4f 4f 93 55 83
97 1f 00 4f 0d 0e 00 00 07 80 8f 82 8f 28 1f 8f
98 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounters tick every 10.000 msec
lo0: bpf attached
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
system power profile changed to 'economy'
acpi_acad0: Off Line
acpi_cmbat0: battery initialization start
ad0: DMA limited to UDMA33, non-ATA66 cable or device
ad0: success setting UDMA33 on SiS 645DX chip
ad0: <HITACHI_DK23DA-40/00J0A0A1> ATA-5 disk at ata0-master
ad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
ad0: piomode=12 dmamode=34 udmamode=69 cblid=1
GEOM: new disk ad0
ar: FreeBSD check1 failed
ata1-master: piomode=12 dmamode=34 udmamode=66 dmaflag=1
ata1-master: success setting PIO4 on SiS 645DX chip
acd0: <QSI CD-RW/DVD-ROM SBW-241/VX11> CD-RW drive at ata1 as master
acd0: read 4125KB/s (32015KB/s) write 4136KB/s (4136KB/s), 2048KB buffer,
PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:61593147
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:61593210 l:16546950
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 31535691264 end 31535723519
GEOM: Configure ad0s2, start 31535723520 length 8472038400 end 40007761919
GEOM: Configure ad0s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s2b, start 268435456 length 1047224320 end 1315659775
GEOM: Configure ad0s2c, start 0 length 8472038400 end 8472038399
GEOM: Configure ad0s2d, start 1315659776 length 268435456 end 1584095231
GEOM: Configure ad0s2e, start 1584095232 length 268435456 end 1852530687
GEOM: Configure ad0s2f, start 1852530688 length 6619507712 end 8472038399
acpi_cmbat0: battery initialization done, tried 1 times
(probe0:sbp0:0:0:0): error 22
(probe0:sbp0:0:0:0): Unretryable Error
(probe1:sbp0:0:1:0): error 22
(probe1:sbp0:0:1:0): Unretryable Error
(probe2:sbp0:0:2:0): error 22
(probe2:sbp0:0:2:0): Unretryable Error
(probe3:sbp0:0:3:0): error 22
(probe3:sbp0:0:3:0): Unretryable Error
(probe4:sbp0:0:4:0): error 22
(probe4:sbp0:0:4:0): Unretryable Error
(probe5:sbp0:0:5:0): error 22
(probe5:sbp0:0:5:0): Unretryable Error
(probe6:sbp0:0:6:0): error 22
(probe6:sbp0:0:6:0): Unretryable Error
Mounting root from ufs:/dev/ad0s2a
start_init: trying /sbin/init
WARNING: /tmp was not properly dismounted
WARNING: /usr was not properly dismounted
WARNING: /var was not properly dismounted
splash: image decoder found: blank_saver
Linux ELF exec handler installed
Greetings
Torsten
More information about the freebsd-mobile
mailing list