Xircom Realport 5.1

[Michael Keller]

Thanks for the reply.  I did add these items to /boot/loader.conf.  I am
still having the same problem.

Here is an example of what I am getting.  I hand-typed this, but I can get
my dmesg over to floppy and post it, if you think it will help.

cardbus1: Bad header in rom 0: [0] 0000
cardbus1: Resource not specified in CIS: id=10, size=80
cardbus1: Resource not specified in CIS: id=14, size=800
cardbus1: Resource not specified in CIS: id=18, size=800
dc0: <Xircom X3201 10/100BaseTX> port 0x1000-0x107f mem
0x20000000-0x200007ff,0x20000800-0x20000fff irq 11 at device 0.0 on cardbus1
dc0: No station address in CIS!
device_probe_and_attach: dc0 attach returned 6
cbb1: Cardbus card activation failed

Any help is greatly appreciated!

-----Original Message-----
From: James R. Higgins [mailto:sysop at bat21.net] 
Sent: Tuesday, July 22, 2003 9:58 PM
To: 'Michael Keller'; freebsd-mobile at freebsd.org
Subject: RE: Xircom Realport 5.1

Just add hw.cbb.start_memory to /boot/loader.conf.  Fot the 600x use the
following setting:

hw.pci.allow_unsupported_io_range=1
hw.cbb.start_memory=0x20000000

-----Original Message-----
From: owner-freebsd-mobile at freebsd.org
[mailto:owner-freebsd-mobile at freebsd.org] On Behalf Of Michael Keller
Sent: Tuesday, July 22, 2003 6:51 PM
To: freebsd-mobile at freebsd.org
Subject: Xircom Realport 5.1




Hi, I have the EXACT same setup (Thinkpad 600X with Xircom RBE-100).  I
= am getting the same errors.  Were you able to get it?  Sorry for my =
ignorance, but I do not know how or where to change the
hw.cbb.start_memory.  I = have been on Google for a week on this,
changing things in the = /boot/device.hints and loader.conf.  Any help
would be appreciated.


_______________________________________________
freebsd-mobile at freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe at freebsd.org"