cbb0: bad Vcc request. ctrl=0x33, status=0x30000b20
Alan Evans
evans.alan at sbcglobal.net
Wed Dec 17 08:54:43 PST 2003
I get the following when I insert an netgear WAG511 on an IBM T20cbb0: bad Vcc request. ctrl=0x33, status=0x30000b20cbb_power: 3Vfound-> vendor=0x168c, dev=0x0013, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a, irq=222 powerspec 2 supports D0 D3 current D0ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 oncardbus0ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3ath0: bpf attachedath0: bpf attachedath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpsath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbpsath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps24Mbps 36Mbps 48Mbps 54Mbpsath0: turbo rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpsath0: bpf attachedath0: 802.11 address: 00:09:5b:69:fa:3aIs the error about "bad Vcc req
uest"
harmless? What does it mean? ShouldI updateto a more current version of FreeBSD?Thanks,Alan Evans.ps.The output of uname -a is;FreeBSD laptop.sbcglobal.net 5.2-BETA FreeBSD 5.2-BETA #1: Tue Dec 1620:45:31 PST 2003 root at laptop.sbcglobal.net:/usr/src/sys/i386/compile/laptop i386And the dmesg of verbose is;Copyright (c) 1992-2003 The FreeBSD Project.Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rightsreserved.FreeBSD 5.2-BETA #1: Tue Dec 16 20:45:31 PST 2003 root at laptop.sbcglobal.net:/usr/src/sys/i386/compile/laptopPreloaded elf kernel "/boot/kernel/kernel" at 0xc07da000.Calibrating clock(s) ... i8254 clock: 1193159 HzCLK_USE_I8254_CALIBRATION not specified - using default frequencyTimecounter "i8254" frequency 1193182 Hz quality 0Calibrating TSC clock ... TSC clock: 796540606 HzCPU: Intel Pentium III (796.54-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x686 Stepping = 6
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>real memory = 268369920 (255 MB)Physical memory chunk(s):0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)0x0000000000826000 - 0x000000000fb49fff, 254951424 bytes (62244 pages)avail memory = 255234048 (243 MB)bios32: Found BIOS32 Service Directory header at 0xc00f71e0bios32: Entry = 0xfd820 (c00fd820) Rev = 0 Len = 1pcibios: PCI BIOS entry at 0xfd7b0+0x19fpnpbios: Found PnP BIOS data at 0xc00f7210pnpbios: Entry = f0000:b1ef Rev = 1.0pnpbios: Event flag at 4b4Other BIOS signatures found:wlan: <802.11 Link Layer>null: <null device, zero device>random: <entropy source>mem: <memory & I/O>Pentium Pro MTRR support enabledath_hal: <Atheros Hardware Access Layer>version 0.9.6.3acpi0: <PTLTD RSDT > on motherboardpci_open(1): mode 1 addr port (0x0cf8) is 0x80000058pci_open(1a): mode1res=0x80000
000
(0x80000000)pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)pcibios: BIOS version 2.10Using $PIR table, 11 entries at 0xc00fdee0PCI-Only Interrupts: noneLocation Bus Device Pin Link IRQsembedded 0 7 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 7 B 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 0 7 C 0x62 3 4 5 6 7 9 10 11 12 14 15embedded 0 7 D 0x63 3 4 5 6 7 9 10 11 12 14 15embedded 0 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 0 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15embedded 0 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15embedded 0 1 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 1 B 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 1 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 2 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 2 B 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 0 5 A
0x60
3 4 5 6 7 9 10 11 12 14 15slot 1 0 3 A 0x62 3 4 5 6 7 9 10 11 12 14 15slot 1 0 3 B 0x62 3 4 5 6 7 9 10 11 12 14 15embedded 0 4 A 0x60 3 4 5 6 7 9 10 11 12 14 15embedded 0 4 B 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 0 4 C 0x62 3 4 5 6 7 9 10 11 12 14 15embedded 0 4 D 0x63 3 4 5 6 7 9 10 11 12 14 15slot 2 8 0 A 0x60 3 4 5 6 7 9 10 11 12 14 15slot 2 8 0 B 0x61 3 4 5 6 7 9 10 11 12 14 15slot 2 8 0 C 0x62 3 4 5 6 7 9 10 11 12 14 15slot 2 8 0 D 0x63 3 4 5 6 7 9 10 11 12 14 15embedded 8 1 A 0x61 3 4 5 6 7 9 10 11 12 14 15embedded 8 2 A 0x62 3 4 5 6 7 9 10 11 12 14 15acpi_bus_number: root bus has no _BBN, assuming 0AcpiOsDerivePciId: bus 0 dev 7 func 0acpi_bus_number: root bus has no _BBN, assuming 0AcpiOsDerivePciId: bus 0 dev 0 func 0acpi_bus_number: root bus has no _BBN, assuming 0AcpiOsDerivePciId: bus 0 dev 7 func 3acpi_bus_
number:
root bus has no _BBN, assuming 0AcpiOsDerivePciId: bus 0 dev 2 func 0acpi_bus_number: root bus has no _BBN, assuming 0AcpiOsDerivePciId: bus 0 dev 2 func 1acpi0: Power Button (fixed)ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 7, width = 5ACPI timer looks BAD min = 2, max = 6, width = 4ACPI timer looks BAD min = 2, max = 6, width = 4Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0acpi_cpu0: <CPU> on acpi0acpi_tz0: <Thermal Zone> on acpi0acpi_lid0: <Control Method Lid Switch> on acpi0acpi_button0: <Sleep Button> on acpi0pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff o
n
acpi0---- initial configuration ------------------------\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.1.0\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.1\\_SB_.LNKC irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.0\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.1\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.5.0\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.7.3---- before setting priority for links ---------------- before fixup boot-disabled links ----------------- after fixup boot-disabled links ------------------ arbitrated configuration ---------------------\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.1.0\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.0\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.2.1\\_SB_.LN
KC irq
11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.0\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.3.1\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.5.0\\_SB_.LNKD irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 0.7.3pci0: <ACPI PCI bus> on pcib0pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabledfound-> vendor=0x8086, dev=0x7190, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)found-> vendor=0x8086, dev=0x7191, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x001f, statreg=0x0220, cachelnsz=0 (dwords) lattimer=0x80 (3840 ns), mingnt=0x8c (35000 ns), maxlat=0x00 (0ns) map[10]: type 1, range 32, base 50000000, size 12, enabledpcib0: matched entry for 0.2.INTA (s
ource
\\_SB_.LNKA)pcib0: slot 2 INTA is routed to irq 11found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=0 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x06(1500 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base 50100000, size 12, enabledpcib0: matched entry for 0.2.INTB (source \\_SB_.LNKB)pcib0: slot 2 INTB is routed to irq 11found-> vendor=0x104c, dev=0xac1b, revid=0x03 bus=0, slot=2, func=1 class=06-07-00, hdrtype=0x02, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0xc0 (48000 ns), maxlat=0x06(1500 ns) intpin=b, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8120000, size 12, enabled map[14]: type 4, range 32, base 00001800, s
ize 6,
enabled map[18]: type 1, range 32, base e8100000, size 17, enabledpcib0: matched entry for 0.3.INTA (source \\_SB_.LNKC)pcib0: slot 3 INTA is routed to irq 11found-> vendor=0x8086, dev=0x1229, revid=0x09 bus=0, slot=3, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0013, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0x42 (1980 ns), mingnt=0x08 (2000 ns), maxlat=0x38(14000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 00001840, size 3, enabled map[14]: type 1, range 32, base e8121000, size 12, enabledpcib0: matched entry for 0.3.INTA (source \\_SB_.LNKC)pcib0: slot 3 INTA is routed to irq 11found-> vendor=0x115d, dev=0x000c, revid=0x00 bus=0, slot=3, func=1 class=07-00-02, hdrtype=0x00, mfdev=1 cmdreg=0x0003, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=
11
powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base e8122000, size 12, enabled map[14]: type 1, range 32, base e8000000, size 20, enabledpcib0: matched entry for 0.5.INTA (source \\_SB_.LNKA)pcib0: slot 5 INTA is routed to irq 11found-> vendor=0x1013, dev=0x6003, revid=0x01 bus=0, slot=5, func=0 class=04-01-00, hdrtype=0x00, mfdev=0 cmdreg=0x0002, statreg=0x0410, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0x18(6000 ns) intpin=a, irq=11 powerspec 2 supports D0 D1 D2 D3 current D0found-> vendor=0x8086, dev=0x7110, revid=0x02 bus=0, slot=7, func=0 class=06-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001850, size 4, enabledfound-> vendor=0x8086, dev=0x7111, revid=0x01 bus=0, slot=7, func=1
class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 00001860, size 5, enabledpcib0: matched entry for 0.7.INTD (source \\_SB_.LNKD)pcib0: slot 7 INTD is routed to irq 11found-> vendor=0x8086, dev=0x7112, revid=0x01 bus=0, slot=7, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=11 map[90]: type 4, range 32, base 00001040, size 4, enabledfound-> vendor=0x8086, dev=0x7113, revid=0x03 bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem0xf8000000-0xfbffffff at d
evice
0.0 on pci0agp0: allocating GATT for aperture of size 64Mpcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0pcib1: secondary bus 1pcib1: subordinate bus 1pcib1: I/O decode 0xf000-0xfffpcib1: memory decode 0xf0000000-0xf7ffffffpcib1: prefetched decode 0xfff00000-0xfffff---- initial configuration ------------------------\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1---- before setting priority for links ---------------- before fixup boot-disabled links ----------------- after fixup boot-disabled links ------------------ arbitrated configuration ---------------------\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.0\\_SB_.LNKB irq 11: [ 3 4 5 6 7 9 10 11] low,level,sharable 1.0.1pci1: <ACPI PCI bus> on pcib1pci1: physical bus=1 map[10]: type 1, range 32, base f0000000, size 27, enabledpcib1: matched entry for 1.0.INTA (s
ource
\\_SB_.LNKA)pcib1: slot 0 INTA is routed to irq 11found-> vendor=0x5333, dev=0x8c12, revid=0x13 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0230, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x04 (1000 ns), maxlat=0xff (63750 ns) intpin=a, irq=11 powerspec 1 supports D0 D1 D2 D3 current D0pci1: <display, VGA> at device 0.0 (no driver attached)cbb0: <TI1450 PCI-CardBus Bridge> mem 0x50000000-0x50000fff irq 11 atdevice 2.0 on pci0cardbus0: <CardBus bus> on cbb0pccard0: <16-bit PCCard bus> on cbb0cbb0: [MPSAFE]cbb0: PCI Configuration space: 0x00: 0xac1b104c 0x02100007 0x06070003 0x00824008 0x10: 0x50000000 0x220000a0 0xb0040200 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0640010b 0x40: 0x01301014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x00000000 0x00000000 0x0000
0000
0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d079 0x00000000 0x80018080 0x00001000 0x90: 0x406602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000cbb1: <TI1450 PCI-CardBus Bridge> mem 0x50100000-0x50100fff irq 11 atdevice 2.1 on pci0cardbus1: <CardBus bus> on cbb1pccard1: <16-bit PCCard bus> on cbb1cbb1: [MPSAFE]cbb1: PCI Configuration space: 0x00: 0xac1b104c 0x02100007 0x06070003 0x00824008 0x10: 0x50100000 0x220000a0 0xb0070500 0xfffff000 0x20: 0x00000000 0xfffff000 0x00000000 0x0000fffc 0x30: 0x00000000 0x0000fffc 0x00000000 0x0640020b 0x40: 0x01301014 0x00000001 0x00000000 0x00000000 0x50: 0x00000000 0x00000000 0x00000000 0x00000000 0x60: 0x00000000 0x0000000
0
0x00000000 0x00000000 0x70: 0x00000000 0x00000000 0x00000000 0x00000000 0x80: 0x0844d079 0x00000000 0x80018080 0x00001000 0x90: 0x406602c0 0x00000000 0x00000000 0x00000000 0xa0: 0xfe110001 0x00c00000 0x00000000 0x00000000 0xb0: 0x00000000 0x00000000 0x00000000 0x00000000 0xc0: 0x00000000 0x00000000 0x00000000 0x00000000 0xd0: 0x00000000 0x00000000 0x00000000 0x00000000 0xe0: 0x00000000 0x00000000 0x00000000 0x00000000 0xf0: 0x00000000 0x00000000 0x00000000 0x00000000fxp0: <Intel 82559ER Pro/100 Ethernet> port 0x1800-0x183f mem0xe8100000-0xe811ffff,0xe8120000-0xe8120fff irq 11 at device 3.0 on pci0fxp0: using memory space register mappingfxp0: Ethernet address 00:10:a4:84:16:5ffxp0: PCI IDs: 8086 1229 8086 2408 0009fxp0: Dynamic Standby mode is disabledmiibus0: <MII bus> on fxp0inphy0: <i82555 10/100 media interface> on miibus0inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, autofxp0: bpf attachedpci0: <simple comms, UART> at device 3.1 (no driver attached)pc
i0:
<multimedia, audio> at device 5.0 (no driver attached)PCI-ISA bridge with incorrect subclass 0x80PCI-ISA bridge with incorrect subclass 0x80isab0: <PCI-ISA bridge> at device 7.0 on pci0isa0: <ISA bus> on isab0atapci0: <Intel PIIX4 UDMA33 controller> port 0x1850-0x185f at device7.1 on pci0ata0: reset tp1 mask=03 ostat0=50 ostat1=00ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00ata0-slave: stat=0x00 err=0x01 lsb=0x00 msb=0x00ata0: reset tp2 mask=03 stat0=50 stat1=00 devices=0x1<ATA_MASTER>ata0: at 0x1f0 irq 14 on atapci0ata0: [MPSAFE]ata1: reset tp1 mask=03 ostat0=00 ostat1=00ata1-master: stat=0x00 err=0x00 lsb=0x00 msb=0x00ata1-slave: stat=0x00 err=0x00 lsb=0x00 msb=0x00ata1: reset tp2 mask=03 stat0=00 stat1=00 devices=0x0ata1: at 0x170 irq 15 on atapci0ata1: [MPSAFE]uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1860-0x187f irq11 at device 7.2 on pci0usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0usb0: USB revision 1.0uhub0: Intel UHCI root hub, class 9
/0, rev
1.00/1.00, addr 1uhub0: 2 ports with 2 removable, self poweredpci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed (disabled)atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0atkbd: the current kbd controller command byte 0047atkbd: keyboard ID 0x54ab (2)kbd0 at atkbd0kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000psm0: unable to allocate IRQpsmcpnp0 irq 12 on acpi0psm0: current command byte:0047psm0: <PS/2 Mouse> irq 12 on atkbdc0psm0: model Generic PS/2 mouse, device ID 0-00, 2 buttonspsm0: config:00000000, flags:00000000, packet size:3psm0: syncmask:c0, syncbits:00fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0fdc0: FIFO enabled, 8 bytes thresholdfd0: <1440-KB 3.5" drive> on fdc0 drive 0sio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may n
ot be
enabledsio0: irq maps: 0x1 0x1 0x1 0x1sio0: probe failed test(s): 1 4 6 9ppc0: using extended I/O port rangeppc0: SPPppc0 port 0x3bc-0x3c3 irq 7 on acpi0ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE modeppbus0: <Parallel port bus> on ppc0plip0: <PLIP network interface> on ppbus0plip0: bpf attachedlpt0: <Printer> on ppbus0lpt0: Interrupt-driven portppi0: <Parallel I/O> on ppbus0unknown: not probed (disabled)sio0: irq maps: 0x1 0x1 0x1 0x1sio0: probe failed test(s): 1 4 6 9acpi_ec0: <Embedded Controller: GPE 0x9, GLK> port 0x66,0x62 on acpi0unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed (disabled)acpi_ec0: info: new max delay is 4 usacpi_ec0: info: new max delay is 6 usacpi_cmbat0: <Control Method Battery> on acpi0acpi_ec0: info: new max delay is 11 usacpi_cmbat1: <Control Method Battery> on acpi0acpi_acad0: <AC Adapter> on acpi0unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed
(disabled)sio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may not be enabledsio0: irq maps: 0x1 0x1 0x1 0x1sio0: probe failed test(s): 1 4 6 9unknown: not probed (disabled)sio0: irq maps: 0x1 0x1 0x1 0x1sio0: probe failed test(s): 1 4 6 9unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed (disabled)unknown: not probed (disabled)npx0: [FAST]npx0: <math processor> on motherboardnpx0: INT 16 interfaceata: ata0 already exists; skipping itata: ata1 already exists; skipping itatkbdc: atkbdc0 already exists; skipping itfdc: fdc0 already exists; skipping itppc: ppc0 already exists; skipping itTrying Read_Port at 203Trying Read_Port at 243Trying Read_Port at 283Trying Read_Port at 2c3Trying Read_Port at 303Trying Read_Port at 343Trying Read_Port at 383Trying Read_Port at 3c3sc: sc0 already exists; skipping itvga: vga0 already exists; skipping itisa_probe_children: disabling PnP devicesisa_probe_children: probing non-PnP devicesorm0: <Option
ROMs>
at iomem0xe0000-0xeffff,0xcc000-0xcd7ff,0xc0000-0xcbfff on isa0pmtimer0 on isa0adv0: not probed (disabled)aha0: not probed (disabled)aic0: not probed (disabled)bt0: not probed (disabled)cs0: not probed (disabled)ed0: not probed (disabled)fe0: not probed (disabled)ie0: not probed (disabled)le0: not probed (disabled)lnc0: not probed (disabled)pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0pcic1: not probed (disabled)sc0: <System console> at flags 0x100 on isa0sc0: VGA <16 virtual consoles, flags=0x300>sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)sio0: configured irq 4 not in bitmap of probed irqs 0sio0: port may not be enabledsio0: irq maps: 0x1 0x1 0x1 0x1sio0: probe failed test(s): 0 1 2 4 6 7 9sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0sio0: type 8250 or not respondingsio1: configured irq 3 not in bitmap of probed irqs 0sio1: port may not be enabledsio1: irq maps: 0x1 0x1 0x1 0x1sio1: probe failed test(s): 0 1 2 4 6 7 9sio1 failed to probe at port
0x2f8-0x2ff irq 3 on isa0sio2: not probed (disabled)sio3: not probed (disabled)sn0: not probed (disabled)vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff onisa0fb0: vga0, vga, type:VGA (5), flags:0x7007ffb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000fb0: init mode:24, bios mode:3, current mode:24fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32kVGA parameters upon power-up50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ffVGA parameters in BIOS for mode 2450 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ffEGA/VGA parameters to be used for mode 2450 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81bf 1f 00 4f 0d 0e 00 00 07 80 9c 0e 8f 28 1f 96b9 a3 ff 00 01 02 03 04 05 14 07 38 39
3a 3b
3c3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ffvt0: not probed (disabled)isa_probe_children: probing PnP devicesDevice configuration finished.procfs registeredTimecounter "TSC" frequency 796540606 Hz quality 800Timecounters tick every 10.000 mseclo0: bpf attachedacpi_cpu0: set speed to 100.0%acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%acpi_cmbat0: battery initialization startacpi_ec0: info: new max delay is 15 usacpi_cmbat0: battery initialization done, tried 1 timesacpi_cmbat1: battery initialization startacpi_acad0: acline initialization startacpi_acad0: On Lineacpi_acad0: acline initialization done, tried 1 timescbb0: bad Vcc request. ctrl=0x33, status=0x30000b20cbb_power: 3Vfound-> vendor=0x168c, dev=0x0013, revid=0x01 bus=2, slot=0, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0290, cachelnsz=8 (dwords) lattimer=0xa8 (5040 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns) intpin=a,
irq=222
powerspec 2 supports D0 D3 current D0ath0: <Atheros 5212> mem 0x88000000-0x8800ffff irq 11 at device 0.0 oncardbus0ath0: mac 5.6 phy 4.1 5ghz radio 1.7 2ghz radio 2.3ath0: bpf attachedath0: bpf attachedath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpsath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbpsath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps24Mbps 36Mbps 48Mbps 54Mbpsath0: turbo rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbpsath0: bpf attachedath0: 802.11 address: 00:09:5b:69:fa:3aata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pinata0-master: setting PIO4 on Intel PIIX4 chipata0-master: setting UDMA33 on Intel PIIX4 chipGEOM: create disk ad0 dp=0xc29cdc60ad0: <IC25N040ATCS05-0/CS4OA61A> ATA-5 disk at ata0-masterad0: 38154MB (78140160 sectors), 77520 C, 16 H, 63 S, 512 Bad0: 16 secs/int, 1 depth queue, UDMA33GEOM: new disk ad0ar: FreeBSD check1 failed[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:419295
87[1]
f:00 typ:6 s(CHS):1023/255/63 e(CHS):1023/254/63 s:41929650l:36210510[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0GEOM: Configure ad0s1, start 32256 length 21467948544 end 21467980799GEOM: Configure ad0s2, start 21467980800 length 18539781120 end40007761919GEOM: Configure ad0s1a, start 0 length 1073741824 end 1073741823GEOM: Configure ad0s1b, start 1073741824 length 536870912 end 1610612735GEOM: Configure ad0s1c, start 0 length 21467948544 end 21467948543GEOM: Configure ad0s1d, start 1610612736 length 5368709120 end6979321855GEOM: Configure ad0s1e, start 6979321856 length 3225419776 end10204741631GEOM: Configure ad0s1f, start 10204741632 length 11263206912 end21467948543Mounting root from ufs:/dev/ad0s1astart_init: trying /sbin/initLinux ELF exec handler installedacpi_cmbat1: battery initialization failed, giving up
More information about the freebsd-mobile
mailing list