Compaq Evo N410c sound?

stan stanb at panix.com
Sat Aug 23 05:45:44 PDT 2003


On Sat, Aug 23, 2003 at 07:53:15AM +0200, Robert Blacqui?re wrote:
> On Fri, Aug 22, 2003 at 06:11:29PM -0400, stan wrote:
> <snip>
> > 
> > ./MAKEDEV sndo with the cwd == /dev, right?
> > 
> > Just did that, still no sound :-(
> > 
> 
> Mmh what does cat /dev/sndstat tells you and does the sound card get
> listed in the dmesg? May be it is not the correct sound driver? 
> After looking on the compaq support site, it looks like you have a ich3
> buildin soundcard. If you try to do kldload snd_ich, is sound working?
> 

YHanks for checking on thta. Using the right module should help :-)

OK, I've loaded that module, and we are "closer" Here is some data:


Script started on Sat Aug 23 08:16:36 2003
You have mail.
brown2#	dmesg
 count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay doo long; resetting byte count
xsmintr: out of sync (0000 != 0008).
psMintr: discard a byte (1).
psmintr: delay too long; resetting byte count
xsmintr: out of sync (0000 != 0008).
psmintr: disca\M-rd a byte (1).
psmintr: d%lay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmint\M-r: out of rync (0000 != 0008).
psmintr: discard a byte (1).\^B<118>Aug 23 04:40:33 brown2 /kernel: psmintr: delay too long; resetting byte count
psmintr: d%lay too"long; resetting byte count
psmintr: out of sync(0000 != 00 8).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psMintr: discard a byte (1).
psmintr: lelay too long; resetting byte count
psmint\M-r: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: nut of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out ob sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; reseuting byte count
`smiNtr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
psmintr: delay too long; resetting byte count
psmintr: out of sync (0000 != 0008).
psmintr: discard a byte (1).
pcm0: <Intel 82801CA (ICH3)> port 0x4400-0x443f,0x4000-0x40ff irq 5 at device 31.5 on pci0
pcm0: <unknown ac97 c\^?dec> (id=0x41445363)
pcm0: measured ac97 link rate at 55922 Hz
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #13: Sun Aug  3 13:39:53 EDT 2003
    root at brown2.fas.com:/usr/obj/usr/src/sys/BROWN2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1196.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268238848 (261952K bytes)
avail memory = 256491520 (250480K bytes)
Preloaded elf kernel "kernel" at 0xc046c000.
Preloaded elf module "snd_maestro3.ko" at 0xc046c09c.
Preloaded elf module "snd_pcm.ko" at 0xc046c140.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0x40080000-0x40080fff irq 10 at device 2.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x40100000-0x40100fff irq 10 at device 2.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <USB controller> at 2.2 irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem 0x40180000-0x40180fff irq 11 at device 3.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x40000000-0x4001ffff,0x40200000-0x40200fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:d0:59:c6:41:bf
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x11c1, dev=0x045c) at 4.1 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM DV28EB 01> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted
WARNING: R/W mount denied.  Filesystem is not clean - run fsck
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 4 
done
Uptime: 8m49s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #13: Sun Aug  3 13:39:53 EDT 2003
    root at brown2.fas.com:/usr/obj/usr/src/sys/BROWN2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1196.14-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268238848 (261952K bytes)
avail memory = 256491520 (250480K bytes)
Preloaded elf kernel "kernel" at 0xc046c000.
Preloaded elf module "snd_maestro3.ko" at 0xc046c09c.
Preloaded elf module "snd_pcm.ko" at 0xc046c140.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0x40080000-0x40080fff irq 10 at device 2.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x40100000-0x40100fff irq 10 at device 2.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <USB controller> at 2.2 irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem 0x40180000-0x40180fff irq 11 at device 3.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x40000000-0x4001ffff,0x40200000-0x40200fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:d0:59:c6:41:bf
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x11c1, dev=0x045c) at 4.1 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM DV28EB 01> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ltmdm0: <Lucent Winmodem> port 0x2040-0x2047 mem 0x40280000-0x40280fff irq 5 at device 4.1 on pci2
ltmdm0: type Virtual 16550A
ltmdm0: detached
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 7 
done
Uptime: 10m1s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #13: Sun Aug  3 13:39:53 EDT 2003
    root at brown2.fas.com:/usr/obj/usr/src/sys/BROWN2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1196.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268238848 (261952K bytes)
avail memory = 256634880 (250620K bytes)
Preloaded elf kernel "kernel" at 0xc0449000.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0x40080000-0x40080fff irq 10 at device 2.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x40100000-0x40100fff irq 10 at device 2.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <USB controller> at 2.2 irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem 0x40180000-0x40180fff irq 11 at device 3.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x40000000-0x4001ffff,0x40200000-0x40200fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:d0:59:c6:41:bf
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x11c1, dev=0x045c) at 4.1 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <unknown card> (vendor=0x8086, dev=0x2485) at 31.5 irq 5
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM DV28EB 01> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
ltmdm0: <Lucent Winmodem> port 0x2040-0x2047 mem 0x40280000-0x40280fff irq 5 at device 4.1 on pci2
ltmdm0: type Virtual 16550A
ltmdm0: detached
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped

syncing disks... 7 
done
Uptime: 2m34s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 4.8-STABLE #13: Sun Aug  3 13:39:53 EDT 2003
    root at brown2.fas.com:/usr/obj/usr/src/sys/BROWN2
Timecounter "i8254"  frequency 1193182 Hz
CPU: Intel(R) Pentium(R) III Mobile CPU      1200MHz (1196.15-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6b1  Stepping = 1
  Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 268238848 (261952K bytes)
avail memory = 256507904 (250496K bytes)
Preloaded elf kernel "kernel" at 0xc0468000.
Preloaded elf module "snd_ich.ko" at 0xc046809c.
Preloaded elf module "snd_pcm.ko" at 0xc046813c.
Pentium Pro MTRR support enabled
md0: Malloc disk
apm0: <APM BIOS> on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82830 host to AGP bridge> mem 0x60000000-0x6fffffff at device 0.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=3576)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <ATI model 4c59 graphics accelerator> at 0.0 irq 11
pcib2: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci2: <PCI bus> on pcib2
ohci0: <NEC uPD 9210 USB controller> mem 0x40080000-0x40080fff irq 10 at device 2.0 on pci2
usb0: OHCI version 1.0, legacy support
usb0: <NEC uPD 9210 USB controller> on ohci0
usb0: USB revision 1.0
uhub0: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0x40100000-0x40100fff irq 10 at device 2.1 on pci2
usb1: OHCI version 1.0, legacy support
usb1: <NEC uPD 9210 USB controller> on ohci1
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pci2: <USB controller> at 2.2 irq 10
pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem 0x40180000-0x40180fff irq 11 at device 3.0 on pci2
pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
pccard0: <PC Card 16-bit bus (classic)> on pcic0
fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0x2000-0x203f mem 0x40000000-0x4001ffff,0x40200000-0x40200fff irq 5 at device 4.0 on pci2
fxp0: Ethernet address 00:d0:59:c6:41:bf
inphy0: <i82555 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci2: <unknown card> (vendor=0x11c1, dev=0x045c) at 4.1 irq 5
isab0: <PCI to ISA bridge (vendor=8086 device=248c)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 ATA100 controller> port 0x4440-0x444f,0-0x3,0-0x7,0-0x3,0-0x7 irq 11 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pcm0: <Intel 82801CA (ICH3)> port 0x4400-0x443f,0x4000-0x40ff irq 5 at device 31.5 on pci0
pcm0: <unknown ac97 codec> (id=0x41445363)
orm0: <Option ROM> at iomem 0xc0000-0xcdfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x3 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: parallel port not found.
ata1-slave: ATAPI identify retries exceeded
ad0: 28615MB <HITACHI_DK23DA-30> [58140/16/63] at ata0-master UDMA33
acd0: DVD-ROM <Compaq DVD-ROM DV28EB 01> at ata1-master PIO4
pcm0: measured ac97 link rate at 55925 Hz
Mounting root from ufs:/dev/ad0s1a
ltmdm0: <Lucent Winmodem> port 0x2040-0x2047 mem 0x40280000-0x40280fff irq 5 at device 4.1 on pci2
ltmdm0: type Virtual 16550A
brown2#	kldstat
Id Refs Address    Size     Name
 1    6 0xc0100000 3470e8   kernel
 2    1 0xc0448000 4c74     snd_ich.ko
 3    1 0xc044d000 1957c    snd_pcm.ko
 4    1 0xc1704000 2000     star_saver.ko
 5    1 0xc1708000 15000    linux.ko
 6    1 0xc173d000 7d000    ltmdm.ko
brown2#	cat /dev/sndstat
FreeBSD Audio Driver (newpcm)
Installed devices:
pcm0: <Intel 82801CA (ICH3)> at io 0x4000, 0x4400 irq 5 bufsz 16384 (1p/1r/0v channels duplex)
brown2#	^Dexit

Script done on Sat Aug 23 08:17:33 2003

So, as you can see this does appear to be the correct module.

The bad news is that, with this module loaded, if I start mp3blaster, the system locks up, and
must be power cycled to recover.

What else might I have wrong?

-- 
"They that would give up essential liberty for temporary safety deserve
neither liberty nor safety."
						-- Benjamin Franklin


More information about the freebsd-mobile mailing list