netgear ma311 failures (wi0 driver)

[vizion communication]

OK guys thanks for all the help

I have now successfully updated the MA311 to latest version.
The PCI card is in the slot recognized as wi0.

dmesg identifies the card--

I have made the entry in rc.conf  ifconfig_wi0="DHCP"

Does anyone know a good way of ensuring that wi0 only
accepted communications from a specific access point (mac
address and ssid)?

David


----- Original Message -----
From: "Doug Barton" <DougB at FreeBSD.org>
To: "Mike Jackson" <mjj at isorauta.ntc.nokia.com>
Cc: <freebsd-mobile at freebsd.org>
Sent: Monday, April 21, 2003 9:54 AM
Subject: Re: netgear ma311 failures (wi0 driver)


> On Mon, 21 Apr 2003, Mike Jackson wrote:
>
> > ext Doug Barton (DougB at freebsd.org) wrote:
> > >
> > > What firware revision are your cards? If you're using
less than 1.4.9 on
> > > the 311, you're likely to have problems. I posted
recently on upgrading
> > > both my 401 and 311 to 1.5.6, and I'm not having any
problems with the 311
> > > in a 4.8 box. Haven't had a chance to try -current on
the server though.
> >
> > Hi,
> >  The ma401 has 1.03.06.00. I don't know what the ma311
has. Is there a
> > way to determine this in a freebsd box? Or do I need to
boot a dos boot
> > disk or what?
>
> You should see something like this either in
/var/run/dmesg.boot, or
> possibly in /var/log/messages:
>
> wi0: Intersil Firmware: Primary 1.01.01, Station 1.05.06
>
> HTH,
>
> Doug
>
> --
>
>     This .signature sanitized for your protection
> _______________________________________________
> freebsd-mobile at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-mobile
> To unsubscribe, send any mail to
"freebsd-mobile-unsubscribe at freebsd.org"
>