orinoco gold card question :update on problem

[iCe]

Hey,

I read on some site or mailing list archive (maybe
even the one for this site) that to get /dev/card0
back (the device that my system couldnt find) you'd
have to compile  OLDCARD and build/install that
kernel. 

so i did, and well it worked. kinda. /dev/card0
exists, and pccard does not complain of not finding it
at startup. instead pccardc complains "invalid
argument" it looks to me like somewhere pccardc is
told to set the memory for the card and its doing it
wrong. but i dunno where or how to fix this. my dmesg
-a output is attached below, if anyone could give me a
hand it would be incredibly appreciated.


Thanks,
Joe Damato
ice799 at yahoo.com


dmesg -a output:


acpi_cmbat0: <Control method Battery> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on
acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82845 host to AGP bridge> mem
0xec000000-0xefffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver
attached)
uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A>
port 0x1800-0x181f irq 11 at device 29.0 on pci0
usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A>
on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B>
port 0x1820-0x183f irq 11 at device 29.1 on pci0
usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B>
on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C>
port 0x1840-0x185f irq 10 at device 29.2 on pci0
usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C>
on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00,
addr 1
uhub2: 2 ports with 2 removable, self powered
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib2: slot 3 INTA is routed to irq 11
pcic0: <Ricoh RL5C475 PCI-CardBus Bridge> irq 11 at
device 3.0 on pci2
pcic0: PCI Memory allocated: 0xe8200000
pccard0: <PC Card 16-bit bus (classic)> on pcic0
Allocating major#250 to "crd"
pci2: <serial bus, FireWire> at device 3.1 (no driver
attached)
fxp0: <Intel 82801CAM (ICH3) Pro/100 VE Ethernet> port
0x4000-0x403f mem 0xe8200000-0xe8200fff irq 10 at
device 8.0 on pci2
fxp0: Ethernet address 00:00:f0:76:88:db
miibus0: <MII bus> on fxp0
inphy0: <i82562ET 10/100 media interface> on miibus0
inphy0:  10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH3 UDMA100 controller> port
0x1860-0x186f,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver
attached)
pci0: <multimedia, audio> at device 31.5 (no driver
attached)
pci0: <simple comms> at device 31.6 (no driver
attached)
acpi_ec0: <embedded controller> port 0x66,0x62 on
acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60
irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 1 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in
COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <Option ROMs> at iomem
0xdc000-0xdffff,0xd8000-0xdbfff,0xd0000-0xd3fff,0xc0000-0xcffff
on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Timecounters tick every 10.000 msec
system power profile changed to 'economy'
Allocating major#249 to "devstat"
ad0: 28615MB <FUJITSU MHR2030AT> [58140/16/63] at
ata0-master UDMA100
acd0: CD-RW <Samsung CD-RW/DVD-ROM SN-308B> at
ata1-master PIO4
/etc/rc: WARNING: $kldxref_enable is not set properly
- see rc.conf(5).
Setup PC-CARD:
pccardc: 
ioctl (PIOCRWMEM)
: 
Invalid argument
 beep
 pccardd
.
Doing initial network setup:
 hostname
.
fxp0:
flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu
1500
	inet6 fe80::200:f0ff:fe76:88db%fxp0 prefixlen 64
tentative scopeid 0x1 
	inet 192.168.1.2 netmask 0xffffff00 broadcast
192.168.1.255
	ether 00:00:f0:76:88:db
	media: Ethernet autoselect (100baseTX <full-duplex>)
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu
16384
	inet6 ::1 prefixlen 128 
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3 
	inet 127.0.0.1 netmask 0xff000000 
Additional routing options:
.
hw.bus.devctl_disable: 
0
 -> 
1

Mounting NFS file systems:
.

__________________________________________________
Do you Yahoo!?
Yahoo! Tax Center - File online, calculators, forms, and more
http://tax.yahoo.com