can not get mib from ar8316 on etherswitch

[Mori Hiroki]

Hi

I think this change have no compatibility.
But Atheros switch code use 32Bit address 
value at register access.

I make get mib script by mruby for AR8316 and RTL8366.

https://github.com/ZRouter/ZRouter/tree/yamori813_modify/profiles/estools/files/usr/local/bin


I use this script on bsnmp-ucd.


----- Original Message -----
> From: Mori Hiroki <yamori813 at yahoo.co.jp>
> To: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Cc: 
> Date: 2020/4/1, Wed 13:21
> Subject: can not get mib from ar8316 on etherswitch
> 
> Hi
> 
> I try to get mib from AR8316. But I can not get value.
> 
> AR8316 mib start from 0x20000. This is over 16bit.
> 
> But member is only 16Bit in sys/dev/etherswitch/etherswitch.h.
> 
> struct etherswitch_reg {
>         uint16_t        reg;
>         uint32_t        val;
> 
> };
> 
> I think good that is change to uint32_t at reg.
> 
> Do you think this ?
> 
> Thanks
> 
> Hiroki Mori
> 
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips 
> To unsubscribe, send any mail to 
> "freebsd-mips-unsubscribe at freebsd.org"
>