spigen problem
Ian Lepore
ian at freebsd.org
Sun May 19 16:58:10 UTC 2019
On Sun, 2019-05-19 at 09:03 -0700, Adrian Chadd wrote:
> hi!
>
> this looks ok to me. I'll go commit this tonight.
>
>
> -a
>
I actually think it's horrible and we should fix the real problem of
supporting hardware that can only do unidirectional transfers. But,
doing so is a pretty big job. I've got some ideas on it, but it's not
something that's going to get finished in a week or two.
-- Ian
> On Mon, 29 Apr 2019 at 19:03, Mori Hiroki <yamori813 at yahoo.co.jp>
> wrote:
> >
> > Hi.
> >
> > I'm sorry. This is mtk_spi_v1.c issue. Current code hard depend
> > flash access.
> >
> > I add workadound for this code and put review.
> >
> > https://reviews.freebsd.org/D20101
> >
> > Thanks
> >
> > Hiroki Mori
> >
> > ----- Original Message -----
> > > From: Emmanuel Vadot <manu at bidouilliste.com>
> > > To: Ian Lepore <ian at freebsd.org>
> > > Cc: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> > > Date: 2019/4/30, Tue 03:23
> > > Subject: Re: spigen problem
> > >
> > > On Mon, 29 Apr 2019 12:13:41 -0600
> > > Ian Lepore <ian at freebsd.org> wrote:
> > >
> > > > On Mon, 2019-04-29 at 19:57 +0200, Emmanuel Vadot wrote:
> > > > > On Mon, 29 Apr 2019 11:34:34 -0600
> > > > > Ian Lepore <ian at freebsd.org> wrote:
> > > > >
> > > > > > On Tue, 2019-04-30 at 02:18 +0900, Mori Hiroki wrote:
> > > > > > > Hi
> > > > > > >
> > > > > > > I add small spi lcd on RT3050. This lcd controller is
> > >
> > > S6D0151.
> > > > > > >
> > > > > > > S6D0151 transfer is tree byte command then tree byte
> > > > data.
> > > > > > >
> > > > > > > I use spigen mruby rapper. This rapper use
> > >
> > > SPIGENIOC_TRANSFER.
> > > > > > >
> > > > > > > I try to send tree byte command. But spi transfer is six
> > >
> > > byte.
> > > > > > >
> > > > > > > This is reason.
> > > > > > >
> > > > > > > sys/dev/spibus/spigen.c
> > > > > > >
> > > > > > > error = copyin(st->st_command.iov_base,
> > >
> > > transfer.tx_cmd,
> > > > > > > transfer.tx_cmd_sz = transfer.rx_cmd_sz = st-
> > > > > > > > st_command.iov_len);
> > > > > > >
> > > > > > >
> > > > > > > This lcd not work six byte transfer.
> > > > > > >
> > > > > > > How do I fix this ?
> > > > > > >
> > > > > > > Regards
> > > > > > >
> > > > > > > Hiroki Mori
> > > > > > >
> > > > > >
> > > > > > I'm not sure what you mean by "This is the reason",
> > >
> > > that code sets
> > > > > > up
> > > > > > the transfer for exactly as many bytes as you requested in
> > > > > > st_command.iov_len. If you set that to three bytes, only
> > > > three
> > > > > > bytes
> > > > > > will be transfered.
> > > > > >
> > > > > > -- Ian
> > > > >
> > > > > I guess that Mori-San wants to transfer 3 bytes but receive
> > > > 6, if
> > > > > it's
> > > > > that you need to set tx_cmd_sz with dummy bytes count too.
> > > > The tx
> > > > > buffer will also need to contain the dummy bytes values.
> > > > >
> > > >
> > > > If you mean send 3 command bytes and read back 3 response
> > > > bytes, then
> > > > set st_command.iov_len to 3 and st_data.iov_len to 3.
> > > >
> > > > -- Ian
> > >
> > > Ah right, forgot about command/data being splitted.
> > >
> > > --
> > > Emmanuel Vadot <manu at bidouilliste.com> <manu at freebsd.org>
> > > _______________________________________________
> > > freebsd-mips at freebsd.org mailing list
> > > https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> > > To unsubscribe, send any mail to
> > > "freebsd-mips-unsubscribe at freebsd.org"
> > >
> >
> > _______________________________________________
> > freebsd-mips at freebsd.org mailing list
> > https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> > To unsubscribe, send any mail to "
> > freebsd-mips-unsubscribe at freebsd.org"
>
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to "
> freebsd-mips-unsubscribe at freebsd.org"
More information about the freebsd-mips
mailing list