modules needed for AR9132 NIC

[Adrian Chadd]

Hi,

It sounds like the hints stuff hasn't been done for it to initialise
the new way to grab the eeprom calibraton data. Take a look at what
changed in AR933X / CARAMBOLA2 hints.
On Wed, 4 Jul 2018 at 16:50, Piotr Kubaj <pkubaj at anongoth.pl> wrote:
>
> I already found out about that, but...
> # kldload if_ath_ahb
> ath0: Vendor=0x168c, Device=0x000b
> ath0: Vendor=0x168c, Device=0x000b
> ath0: <Atheros 9130> at mem 0x180c0000-0x180effff irq 0 on nexus0
> ath0: unable to attach hardware; HAL status 8
> Unimplemented nexus_teardown_intr at /home/pkubaj/freebsd/sys/mips/mips/nexus.c:511
> device_attach: ath0 attach returned 6
> # kldstat
> Id Refs Address        Size Name
>  1   39        0x0   4e6010 kernel
>  2    2        0x0     4c80 bridgestp.ko
>  3    1        0x0     7af0 if_bridge.ko
>  4    1        0x0      314 if_ath.ko
>  5    1        0x0     1bc0 if_ath_pci.ko
>  6   11        0x0    113e0 ath_hal.ko
>  7    3        0x0    331c0 ath_main.ko
>  8    2        0x0      5a4 ath_dfs.ko
>  9    7        0x0    68340 wlan.ko
> 10    2        0x0     3c54 ath_rate.ko
> 11    1        0x0    66690 ath_hal_ar9300.ko
> 12    1        0x0    39ac0 ath_hal_ar5416.ko
> 13    2        0x0    25a30 ath_hal_ar5212.ko
> 14    1        0x0     e3d0 ath_hal_ar5211.ko
> 15    1        0x0     a564 ath_hal_ar5210.ko
> 16    1        0x0     5500 wlan_ccmp.ko
> 17    1        0x0      bb0 if_ath_ahb.ko
>
> I added "options INTRNG" to my kernel config, so that this "Unimplemented nexus_teardown_intr" code path isn't taken, but now I get several errors during compilation, so I guess that was a mistake.
>
> On 18-07-04 16:39:42, Adrian Chadd wrote:
> >Hi,
> >
> >You should also load ath_hal_ar5212 and ath_hal_ar5416. That should do it!
> >
> >
> >-a
> >
> >On Wed, 4 Jul 2018 at 13:10, Piotr Kubaj via freebsd-wireless
> ><freebsd-wireless at freebsd.org> wrote:
> >>
> >> Hi all,
> >>
> >> what are the kernel modules necessary for running AR9132 card (present on TL-WR1043ND v1.x)?
> >>
> >> I'm currently loading if_ath_ahb, ath_hal, ath_main, ath_dfs and ath_rate, but the only line with ath0 in dmesg is:
> >> ath0: Vendor=0x168c, Device=0x000b
> >>
> >> and that's all.
> >>
> >> I'm running CURRENT from today.
> >>
> >> --
> >>  _________________________________________
> >> / Try to be the best of whatever you are, \
> >> \ even if what you are is no good.        /
> >>  -----------------------------------------
> >>         \   ^__^
> >>          \  (oo)\_______
> >>             (__)\       )\/\
> >>                 ||----w |
> >>                 ||     ||
> >
> >--
> >This message has been scanned for viruses and
> >dangerous content by MailScanner, and is
> >believed to be clean.
> >
>
> --
>  ________________________________________
> / The light at the end of the tunnel is  \
> \ the headlight of an approaching train. /
>  ----------------------------------------
>         \   ^__^
>          \  (oo)\_______
>             (__)\       )\/\
>                 ||----w |
>                 ||     ||