onion omega2+

[Aleksandr Rybalko]

Hi guys!

Ed, please check kernel entry point from ELF binary.
Some time ago I noticed that offset may vary, IIRC it was between 0x100 and
0x120.
But did not get time to resolve it.
So problem can be just wrong entry point address.

Thanks!

2017-11-16 2:37 GMT+02:00 Ed Maste <emaste at freebsd.org>:

> On 15 November 2017 at 15:52, Mike Wolman <mike at wolman.co.uk> wrote:
> >
> > Im not sure why the boot didnt continue for you - i had a fair bit of
> > trouble getting things going initially with the load address and entry
> point
> > stuff but those settings worked for me - but the looks of things you have
> > done everything as I did - im not sure why you cant get it to go any
> further
> > - tbh I think after various randomish attempts and hints from the mips
> list
> > found the correct load address.
>
> Ok, hopefully some others can give this a try on another Omega 2 (2+).
>
> > Just checking are your trying this on the Omega2 or the Omega2Plus? Also
> I
> > was using a ral (editmax) wifi usb dongle and a usb hub - I cant
> remember if
> > I removed the usb memory key before booting but maybe worth messing with
> usb
> > devices after loading stuff from the memory key and before booting.
>
> Ok, we can certainly give that a try. It should be an Omega2Plus; I
> got it with the Kickstarter maker kit
> _______________________________________________
> freebsd-mips at freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-mips
> To unsubscribe, send any mail to "freebsd-mips-unsubscribe at freebsd.org"
>



-- 
WBW
-------
Rybalko Aleksandr <ray at ddteam.net>