onion omega2+

[Outback Dingo]

On Tue, May 9, 2017 at 3:42 PM, Mike Wolman <mike at wolman.co.uk> wrote:
>
> Ok got somewhere with this
>
>
> USB_STORAGE: 1 Storage Device(s) found
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
> *
> *
> Reading file "kernel.MT7628_FDT.uImage"
> *
> **
> **
> **
> **
> **
> **
> **
> **
> **
> **
> ******
> ******
> ******************************************************************************************************************************************************************************************************************
> ****
> *
> FAT: 5654824 Bytes read
> Omega2 # go
> Usage:
> go      - start application at address 'addr'
>
> Omega2 # go 0x80001000
> ## Starting application at 0x80001000 ...
>
>
>
> I have tried with:
>
> Omega2 # go 0x80001100
> ## Starting application at 0x80001100 ...
>
>
>
> I have tried using the 0x80001000 for fatload as well:
>
>
> USB_STORAGE: 1 Storage Device(s) found
> Omega2 # help fatload
> fatload <interface> <dev[:part]>  <addr> <filename> [bytes]
>     - load binary file 'filename' from 'dev' on 'interface'
>       to address 'addr' from dos filesystem
>
> Reading file "kernel.MT7628_FDT.uImage"
> *
> **
> **
> **
> **
> **
> **
> **
> **
> **
> **
> ******
> ******
> ******************************************************************************************************************************************************************************************************************
> ****
> *
> FAT: 5654824 Bytes read
> Omega2 # go 0x80001100
> ## Starting application at 0x80001100 ...
>
>
>
> However:
>
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
> *
> *
> Reading file "kernel.MT7628_FDT.uImage"
> *
> **
> **
> **
> **
> **
> **
> **
> **
> **
> **
> ******
> ******
> ******************************************************************************************************************************************************************************************************************
> ****
> *
> FAT: 5654824 Bytes read
> Omega2 # bootm 0x80800000
> ## Booting image at 80800000 ...
>    Image Name:   FreeBSD
>    Image Type:   MIPS Linux Kernel Image (uncompressed)
>    Data Size:    5654760 Bytes =  5.4 MB
>    Load Address: 80001000
>    Entry Point:  80001100
>    Verifying Checksum ... OK
> OK
> No initrd
> ## Transferring control to Linux (at address 80001100) ...
> ## Giving linux memsize in MB, 128
>
> Starting kernel ...
>
>
> But it doesnt go any further
>



I had a similar situation on a device, it wasnt printing output to the
screen but was actually booted
i think you might need a patch for u-boot ... i could be off base here
but sounds quite similiar