onion omega2+
Mori Hiroki
yamori813 at yahoo.co.jp
Tue May 9 13:21:08 UTC 2017
Hi.
One more.
Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
Omega2 # bootm 0x80800000
----- Original Message -----
> From: Mike Wolman <mike at wolman.co.uk>
> To: Mori Hiroki <yamori813 at yahoo.co.jp>; Aleksandr Rybalko <ray at ddteam.net>
> Cc: "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
> Date: 2017/5/9, Tue 22:01
> Subject: Re: onion omega2+
>
>
> No joy
>
> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
> *
> *
> Reading file "kernel.MT7628_FDT.uImage"
> *
> **
> **
> **
> **
> **
> **
> **
> **
> **
> **
> ******
> ******
> ******************************************************************************************************************************************************************************************************************
> ****
> *
> FAT: 5654824 Bytes read
> Omega2 # bootm
> ## Booting image at 80100000 ...
> Bad Magic Number,CE6AE7C4
>
> I am going to get a different usb memory stick and rebuild the kernel
> later on as i got an error when last writing to the usb memory key and
> its quite old now so just want to eliminate it from testing.
>
>
> On 09/05/2017 13:52, Mori Hiroki wrote:
>> Hi.
>>
>> This is my sample operation get image from network and boot.
>>
>> RT3052 # tftpboot 0x80800000 Planex_MZK-WNH_kernel.kbin.oldlzma.uboot
>> RT3052 # bootm
>>
>>
>> I don't use USB support U-Boot. But I think fatload command argument is
>> temporary memory address not kernel address.
>>
>> How about this.
>>
>> Omega2 # fatload usb 0:1 0x80800000 kernel.MT7628_FDT.uImage
>> Omega2 # bootm
>>
>> ----- Original Message -----
>>> From: Mike Wolman <mike at wolman.co.uk>
>>> To: Aleksandr Rybalko <ray at ddteam.net>; Mori Hiroki
> <yamori813 at yahoo.co.jp>
>>> Cc: "freebsd-mips at freebsd.org"
> <freebsd-mips at freebsd.org>
>>> Date: 2017/5/9, Tue 20:48
>>> Subject: Re: onion omega2+
>>>
>>>
>>>
>>>
>>> Is it possible to exclude the compression of the kernel/image for
>> now eg:
>>> mkimage -A mips -C none -O linux -T kernel -a 0x80001000 -e
>> 0x80001100 -n "FreeBSD" -d kernel.MT7628_FDT
>> kernel.MT7628_FDT.uImage
>>>
>>> I have just tried the above but when booting I get a Bad Magic
>> Number.
>>>
>>> Omega2 # fatload usb 0:1 0x80001000 kernel.MT7628_FDT.uImage
>>> *
>>> *
>>> Reading file "kernel.MT7628_FDT.uImage"
>>> *
>>> **
>>> **
>>> **
>>> **
>>> **
>>> **
>>> **
>>> **
>>> **
>>> **
>>> ******
>>> ******
>>>
> ******************************************************************************************************************************************************************************************************************
>>> ****
>>> *
>>> FAT: 5654824 Bytes read
>>> Omega2 # bootm 0x80001100
>>> ## Booting image at 80001100 ...
>>> Bad Magic Number,1C994480
>>> Omega2 #
>>>
>>>
>>> I have seen other examples starting a program directly with going to
>> the address but this didnt work either:
>>> Omega2 # go 0x80001100
>>> ## Starting application at 0x80001100 ...
>>>
>>> omega freezes here.
>>>
>>>
>>>
>>>
>>> On 09/05/2017 10:12, Aleksandr Rybalko wrote:
>>>
>>> Fix things in order :)
>> Currently you have problem with LZMA, serial port later.
>>>>
>> So, find version of lzma used to build linux firmware, MIPS routers world
> use about 5 incompatible versions. One of them, you can find here:
>>>>
> http://project.zrouter.org/hg/zrouter/file/9ac53695a44d/tools/oldlzma
>>>>
>>>>
>>>>
>>>>
>>>> 2017-05-09 7:03 GMT+03:00 Mori Hiroki
> <yamori813 at yahoo.co.jp>:
>>>>
>>>> Hi Mike
>>>>> Could you show u-boot printenv command result.
>>>>>
>>>>> Thanks
>>>>>
>>>>>
>>>>> ----- Original Message -----
>>>>>> From: Mike Wolman <mike at wolman.co.uk>
>>>>>> To: Mori Hiroki <yamori813 at yahoo.co.jp>;
> "freebsd-mips at freebsd.org" <freebsd-mips at freebsd.org>
>>>>>> Cc:
>>>>>> Date: 2017/5/9, Tue 10:30
>>>>>> Subject: Re: onion omega2+
>>>>>>
>>>>>> Hi Mori,
>>>>>>
>>>>>> When I compiled the world/kernel etc I used:
>>>>>>
>>>>>> X_DTS_FILE=OMEGA2P.dts KERNCONF=MT7628_FDT
>>>>>> ../freebsd-wifi-build/build/ bin/build ralink
>> buildkernel
>>>>>> I checked the serial stuff was the same as the
>> other configs in:
>>>>>> https://github.com/freebsd/ freebsd-wifi-build/
>>>>>> and they looked the same.
>>>>>>
>>>>>> The OMEGA2.dtsi file has:
>>>>>>
>>>>>> chosen {
>>>>>> bootargs =
> "console=ttyS0,115200";
>>>>>> };
>>>>>>
>>>>>>
>>>>>> And mt7628an.dtsi has: serial0 = &uartlite;
>>>>>>
>>>>>> I dont think im getting as far as worrying about
>> the serial console at
>>>>>> the moment and need to get the kernel to uncompress
>> first.
>>>>>> Mike.
>>>>>>
>>>>>>
>>>>>> On 09/05/2017 02:20, Mori Hiroki wrote:
>>>>>>> Hi Mike
>>>>>>>
>>>>>>> In FreeBSD is use serial0 dts item to console.
>>>>>>>
>>>>>>> I think good to use this at start.
>>>>>>>
>>>>>>> freebsd/sys/gnu/dts/mips/ MT7628.dts
>>>>>>>
>>>>>>> ----- Original Message -----
>>>>>>>> From: Mike Wolman <mike at wolman.co.uk>
>>>>>>>> To: Mori Hiroki <yamori813 at yahoo.co.jp>;
>>>>>> "freebsd-mips at freebsd.org"
> <freebsd-mips at freebsd.org>
>>>>>>>> Cc:
>>>>>>>> Date: 2017/5/9, Tue 09:25
>>>>>>>> Subject: Re: onion omega2+
>>>>>>>>
>>>>>>>> Hi Mori,
>>>>>>>>
>>>>>>>> I grabbed the dts files from:
>>>>>>>>
>>>>>>>> https://github.com/WereCatf/
> source/tree/image/target/ linux/ramips/dts
>>>>>>>>
>>>>>> https://github.com/WereCatf/ source/blob/image/target/
> linux/ramips/dts/OMEGA2P.dts
>>>>>> https://github.com/WereCatf/ source/blob/image/target/
> linux/ramips/dts/OMEGA2.dtsi
>>>>>>>> If this is of any use from the default
>> linux install on the flash:
>>>>>>>> root at Omega-12BF:/proc# cat /proc/mtd
>>>>>>>> dev: size erasesize name
>>>>>>>> mtd0: 00030000 00010000 "u-boot"
>>>>>>>> mtd1: 00010000 00010000 "u-boot-env"
>>>>>>>> mtd2: 00010000 00010000 "factory"
>>>>>>>> mtd3: 01fb0000 00010000 "firmware"
>>>>>>>> mtd4: 00148842 00010000 "kernel"
>>>>>>>> mtd5: 01e677be 00010000 "rootfs"
>>>>>>>> mtd6: 01950000 00010000 "rootfs_data"
>>>>>>>>
>>>>>>>>
>>>>>>>> btw after posting i spotted and error in
>> what i did with:
>>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
>> \
>>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>>> -n "FreeBSD" -d
>> kernel.MT7628_FDT.lzma
>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>
>>>>>>>> I have redone this using the correct
>> compressed kernel ie:
>>>>>>>> mkimage -A mips -O linux -T kernel -C lzma
>> \
>>>>>>>> -a 0x80001000 -e 0x80001100 \
>>>>>>>> -n "FreeBSD" -d
>> kernel.MT7628_FDT.ulzma
>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>
>>>>>>>>
>>>>>>>> But this didnt work.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> On 09/05/2017 01:17, Mori Hiroki wrote:
>>>>>>>>> Hi.
>>>>>>>>>
>>>>>>>>> I think if U-Boot work memory make
>> broken then
>>>>>>>>> Uncompressing Kernel Image is NG.
>>>>>>>>>
>>>>>>>>> Some ARM U-Boot is use top address
>> in work memory.
>>>>>>>>> If this case your kernel start
>> address to move to
>>>>>>>>> after work memory. But I never see
>> in MIPS.
>>>>>>>>> And What is set FDT_DTS_FILE in
>> your kernel configuration ?
>>>>>>>>> ----- Original Message -----
>>>>>>>>>
>>>>>>>>>> From: Mike Wolman
> <mike at wolman.co.uk>
>>>>>>>>>> To: freebsd-mips at freebsd.org
>>>>>>>>>> Cc:
>>>>>>>>>> Date: 2017/5/9, Tue 07:48
>>>>>>>>>> Subject: Re: onion omega2+
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> More info in case anyone can
>> point me in the right direction.
>>>>>>>>>> I have found:
>>>>>>>>>>
>>>>>>>>>> https://forum.openwrt.org/
> viewtopic.php?id=53865
>>>>>>>>>>
>>>>>>>>>> I have tried changing how lzma
>> compresses the kernel by
>>>>>> adding -d20 to
>>>>>>>>>> the build scripts eg:
>>>>>>>>>>
>>>>>>>>>> /usr/local/bin/lzma e
>>>>>>>>>>
>>>>>> /home/mike/omega2/src/../root/
> mipsel_ap/boot/kernel.MT7628_ FDT/kernel
>>>>>>>> \
>>>>>>>>>> /home/mike/omega2/src/../
> tftpboot/kernel.MT7628_FDT. lzma
>> -d20
>>>>>>>>>> This did not work.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Looking at the onion omega conf
>> I see that it uses mkuzip and
>>>>>> not lzma
>>>>>>>>>> with the following settings:
>>>>>>>>>>
>>>>>>>>>> X_FSIMAGE_CMD="mkuzip"
>>>>>>>>>> X_FSIMAGE_ARGS="-L -d -s 65536
>> -v"
>>>>>>>>>> X_FSIMAGE_SUFFIX=".ulzma"
>>>>>>>>>>
>>>>>>>>>> So tried the following:
>>>>>>>>>>
>>>>>>>>>> mkuzip -L -d -s 65536 -v -o
>> kernel.MT7628_FDT.ulzma
>>>>>> kernel.MT7628_FDT
>>>>>>>>>> mkimage -A mips -O linux -T
>> kernel -C lzma \
>>>>>>>>>> -a 0x80001000 -e 0x80001100
>> \
>>>>>>>>>> -n "FreeBSD" -d
>> kernel.MT7628_FDT.lzma
>>>>>>>>>> kernel.MT7628_FDT.ulzma.uImage
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> But this did not work either.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On 08/05/2017 19:41, Aleksandr
>> Rybalko wrote:
>>>>>>>>>>> Hi Mike!
>>>>>>>>>>>
>>>>>>>>>>> I see you have no "OK"
>> after
>>>>>> "Uncompressing Kernel
>>>>>>>> Image
>>>>>>>>>> ...", so
>>>>>>>>>>> first point uboot
>> decompressor fail.
>>>>>>>>>>> Why fail? Because you have
>> wrong base address in image:
>>>>>>>>>>> Load Address: fffffff2
>>>>>>>>>>> Entry Point: fffffff2
>>>>>>>>>>> MIPS32 machines have RAM
>> mapped to 0x80000000 address,
>>>>>> so adding
>>>>>>>> its
>>>>>>>>>>> size, you will get max
>> address (if 16MB, it will be
>>>>>> 0x81000000),
>>>>>>>> but
>>>>>>>>>>> you uboot image was
>> created with 0xfffffff2.
>>>>>>>>>>> Even more, unpacked kernel
>> expects it will be called at
>>>>>>>> 0x80001100. so
>>>>>>>>>>> if you have ELF kernel
>> (file with ELF header, like
>>>>>> every
>>>>>>>> executable)
>>>>>>>>>>> that file have to be
>> loaded at (0x80001100 -
>>>>>> ELF_HEADER_SIZE).
>>>>>>>>>>> In most cases it will be
>> 0x80001100 - 0x100 =
>>>>>> 0x80001000. But
>>>>>>>> sometime
>>>>>>>>>>> (I did not found why) it
>> can be 0x20, you can find it
>>>>>> by looking
>>>>>>>> at
>>>>>>>>>>> .text section in readelf
>> -S.
>>>>>>>>>>> So if you have kernel with
>> entry point 0x80001100 and
>>>>>> .text
>>>>>>>> segment
>>>>>>>>>>> offset 0x100, you have to
>> create uboot image with load
>>>>>> address
>>>>>>>>>>> 0x80001000 and entry point
>> 0x80001100.
>>>>>>>>>>> If that step successful
>> you will get:
>>>>>>>>>>> /Uncompressing Kernel
>> Image/ ... OK
>>>>>>>>>>> Starting kernel ...
>>>>>>>>>>>
>>>>>>>>>>> Last line mean, uboot did
>> jump into kernel code.
>>>>>>>>>>> Good luck.
>>>>>>>>>>>
>>>>>>>>>>> 2017-05-07 18:20 GMT+03:00
>> Mike Wolman
>>>>>> <mike at wolman.co.uk
>>>>>>>>>>>
> <mailto:mike at wolman.co.uk>>:
>>>>>>>>>>>
>>>>>>>>>>> Hi,
>>>>>>>>>>>
>>>>>>>>>>> I am trying to get
>> FreeBSD working on this board -
>>>>>> I think I
>>>>>>>> am
>>>>>>>>>>> almost there in
>> getting it working but need some
>>>>>> help please.
>>>>>>>>>>> I have followed
>> instructions from the
>>>>>> freebsd-wifi-build and
>>>>>>>>>>> *think* I have got
>> everything correct - I am trying
>>>>>> to do
>>>>>>>> this on
>>>>>>>>>>> a CURRENT setup:
>>>>>>>>>>>
>>>>>>>>>>> FreeBSD
>> f64-current.mw.office 12.0-CURRENT FreeBSD
>>>>>>>> 12.0-CURRENT #0
>>>>>>>>>>> r317887: Sun May 7
>> 03:20:34 UTC 2017
>>>>>>>>>>>
>>>>>>>> mike at f64-current.mw.office:/
> usr/obj/usr/src/sys/GENERIC- NODEBUG amd64
>>>>>>>>>>> $ cat
>> ~/.freebsd-wifi-build- settings.cfg
>>>>>>>>>>> X_SKIP_MORE_STUFF=YES
>>>>>>>>>>>
>> X_EXTRA_SRC_CONF=~/omega2/src. conf
>>>>>>>>>>> $ cat
>> ~/omega2/src.conf
>>>>>>>>>>> WITHOUT_CLANG=YES
>>>>>>>>>>> WITHOUT_CLANG_FULL=YES
>>>>>>>>>>>
>>>>>>>>>>> get dts files from
>> thread
>>>>>>>>>>>
>>>>>> http://community.onion.io/ topic/1099/openwrt-on-the-
> omega-2/8
>>>>>>>>>>>
>>>>>>>> <http://community.onion.io/
> topic/1099/openwrt-on-the- omega-2/8>
>>>>>>>>>>> cd
>> ~/omega2/src/sys/gnu/dts/mips
>>>>>>>>>>> fetch
>>>>>>>>>>>
>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
> target/linux/ramips/dts/ OMEGA2.dtsi
>>>>>>>>>>>
>>>>>> <https://raw. githubusercontent.com/
> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dtsi>
>>>>>>>>>>> fetch
>>>>>>>>>>>
>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
> target/linux/ramips/dts/ OMEGA2.dts
>>>>>>>>>>>
>>>>>> <https://raw. githubusercontent.com/
> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2.dts>
>>>>>>>>>>> fetch
>>>>>>>>>>>
>>>>>> https://raw.githubusercontent. com/WereCatf/source/image/
> target/linux/ramips/dts/ OMEGA2P.dts
>>>>>>>>>>>
>>>>>> <https://raw. githubusercontent.com/
> WereCatf/source/image/target/ linux/ramips/dts/OMEGA2P.dts>
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> buildworld
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> buildkernel
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> installworld
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> installkernel
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> distribution
>>>>>>>>>>>
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> mfsroot
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink
>>>>>> fsimage
>>>>>>>>>>> X_DTS_FILE=OMEGA2P.dts
>> KERNCONF=MT7628_FDT
>>>>>>>>>>>
>> ../freebsd-wifi-build/build/ bin/build ralink uboot
>>>>>>>>>>>
>>>>>>>>>>> Create flash:
>>>>>>>>>>>
>>>>>>>>>>>
>> X_FLASH=kernel.MT7628_FDT. lzma.flash
>>>>>>>>>>> dd if=/dev/zero bs=$((
>> 0x200000 )) count=1
>>>>>> of=${X_FLASH}
>>>>>>>>>>> dd
>> if=kernel.MT7628_FDT.lzma. uImage of=${X_FLASH}
>>>>>>>> conv=notrunc
>>>>>>>>>>> dd if=
>> mfsroot-ralink.img.lzma >> ${X_FLASH}
>>>>>>>>>>>
>>>>>>>>>>> $ readelf -h
>> kernel.MT7628_FDT | grep Entry
>>>>>>>>>>> Entry point
>> address: 0x80001100
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Now on the omega over
>> serial - I didnt get the
>>>>>> network
>>>>>>>> expansion
>>>>>>>>>>> doc thing so am doing
>> stuff with usb rather than
>>>>>> tftp
>>>>>>>>>>> I am not 100% sure
>> about the 0x80001100 and the
>>>>>> fatload and
>>>>>>>> have
>>>>>>>>>>> tried this
>>>>>>>>>>>
>>>>>>>>>>> Omega2 # fatload usb
>> 0:1 0x80001100
>>>>>>>> /kernel.MT7628_FDT.lzma.flash
>>>>>>>>>>> *
>>>>>>>>>>> *
>>>>>>>>>>> Reading file
>>>>>> "/kernel.MT7628_FDT.lzma. flash"
>>>>>>>>>>> *
>>>>>>>>>>> **
>>>>>>>>>>> **
>>>>>>>>>>> **
>>>>>>>>>>> ******
>>>>>>>>>>>
>>>>>> ******************************
> ****************************** ******************************
> ****************************** *********************
>>>>>>>>>>> ******
>>>>>>>>>>> *
>>>>>>>>>>> FAT: 2108463 Bytes
>> read
>>>>>>>>>>> Omega2 # bootm
>> 0x80001100
>>>>>>>>>>> ## Booting image at
>> 80001100 ...
>>>>>>>>>>> Image Name:
>> FreeBSD
>>>>>>>>>>> Image Type: MIPS
>> Linux Kernel Image (lzma
>>>>>> compressed)
>>>>>>>>>>> Data Size:
>> 1365122 Bytes = 1.3 MB
>>>>>>>>>>> Load Address:
>> fffffff2
>>>>>>>>>>> Entry Point:
>> fffffff2
>>>>>>>>>>> Verifying Checksum
>> ... OK
>>>>>>>>>>> Uncompressing
>> Kernel Image ...
>>>>>>>>>>>
>>>>>>>>>>> At this point nothing
>> happens and console hangs -
>>>>>> note in
>>>>>>>>>>> OMEGA2.dtsithe console
>> is set to ttyS0:
>>>>>>>>>>> bootargs =
>> "console=ttyS0,115200";
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I have also tried with
>> just kernel.MT7628_FDT and
>>>>>>>>>>> kernel.MT7628_FDT.lzma
>> but both fail:
>>>>>>>>>>> Omega2 # fatload usb
>> 0:1 0x80001100
>>>>>>>> /kernel.MT7628_FDT.lzma.uImage
>>>>>>>>>>> *
>>>>>>>>>>> *
>>>>>>>>>>> Reading file
>>>>>> "/kernel.MT7628_FDT.lzma. uImage"
>>>>>>>>>>> *
>>>>>>>>>>> **
>>>>>>>>>>> **
>>>>>>>>>>> ******
>>>>>>>>>>>
>>>>>> ******************************
> ****************************** ******************************
> ****************************** ******
>>>>>>>>>>> **********
>>>>>>>>>>> *
>>>>>>>>>>> FAT: 1365186 Bytes
>> read
>>>>>>>>>>> Omega2 # bootm
>> 0x80001100
>>>>>>>>>>> ## Booting image at
>> 80001100 ...
>>>>>>>>>>> Image Name:
>> FreeBSD
>>>>>>>>>>> Image Type: MIPS
>> Linux Kernel Image (lzma
>>>>>> compressed)
>>>>>>>>>>> Data Size:
>> 1365122 Bytes = 1.3 MB
>>>>>>>>>>> Load Address:
>> fffffff2
>>>>>>>>>>> Entry Point:
>> fffffff2
>>>>>>>>>>> Verifying Checksum
>> ... OK
>>>>>>>>>>> Uncompressing
>> Kernel Image ...
>>>>>>>>>>>
>>>>>>>>>>> A few comments on the
>> hardware for anyone who wants
>>>>>> to get
>>>>>>>> one:
>>>>>>>>>>> Get the expansion dock
>> with serial port access -
>>>>>> the power
>>>>>>>> dock
>>>>>>>>>>> does not provide
>> serial access - i think it is
>>>>>> possible to
>>>>>>>> use an
>>>>>>>>>>> ftdi ttl serial
>> chip/cable but have not tried.
>>>>>>>>>>> Stupidly I forgot this
>> only has wifi access so you
>>>>>> are not
>>>>>>>> able to
>>>>>>>>>>> tftp boot this without
>> getting the ethernet network
>>>>>> expansion
>>>>>>>> but
>>>>>>>>>>> loading stuff up from
>> a usb memory stick is seem
>>>>>> fine from
>>>>>>>> u-boot.
>>>>>>>>>>> I do not think that it
>> is possible to boot from the
>>>>>> SD card
>>>>>>>> on the
>>>>>>>>>>> Omega2+ - which is a
>> shame.
>>>>>>>>>>> Thanks for reading,
>>>>>>>>>>>
>>>>>>>>>>> Mike.
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>> ______________________________ _________________
>>>>>>>>>>> freebsd-mips at freebsd.org
>>>>>>>> <mailto:freebsd-mips at freebsd. org>mailing
>>>>>>>>>> list
>>>>>>>>>>>
>>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>>>>>>>>
>>>>>>>> <https://lists.freebsd.org/
> mailman/listinfo/freebsd-mips>
>>>>>>>>>>> To unsubscribe, send
>> any mail to
>>>>>>>>>>>
> "freebsd-mips-unsubscribe@ freebsd.org
>>>>>>>>>>>
>>>>>> <mailto:freebsd-mips- unsubscribe at freebsd.org>"
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> --
>>>>>>>>>>> WBW
>>>>>>>>>>> -------
>>>>>>>>>>> Rybalko Aleksandr
> <ray at ddteam.net
>>>>>>>> <mailto:ray at ddteam.net>>
>>>>>>>>>> ______________________________
> _________________
>>>>>>>>>> freebsd-mips at freebsd.org mailing list
>>>>>>>>>> https://lists.freebsd.org/
> mailman/listinfo/freebsd-mips
>>>>>>>>>> To unsubscribe, send any mail to
>>>>>>>>>> "freebsd-mips-unsubscribe@
> freebsd.org"
>>>>>>>>>>
>>>>> ______________________________ _________________
>>>>> freebsd-mips at freebsd.org mailing list
>>>>> https://lists.freebsd.org/ mailman/listinfo/freebsd-mips
>>>>> To unsubscribe, send any mail to
> "freebsd-mips-unsubscribe@ freebsd.org"
>>>>>
>>>>
>>>> --
>>>>
>>>> WBW
>>>> -------
>>>> Rybalko Aleksandr <ray at ddteam.net>
>>>>
>>>>
>>>
>>>
>
More information about the freebsd-mips
mailing list