TP-Link WDR-4300 - Success!!!

[Bernd Walter]

On Fri, Jun 19, 2015 at 11:09:30PM +0200, Bernd Walter wrote:
> On Fri, Jun 19, 2015 at 10:26:22PM +0200, Bernd Walter wrote:
> > On Tue, Jun 16, 2015 at 12:10:13PM -0700, Adrian Chadd wrote:
> > > Ok, right. I nthat case it's just 2x2 wifi, and gige ethernet.
> > > 
> > > the config string to put in the build cfg file, fro mopenwrt:
> > > 
> > > $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR3600V1,tl-wdr3600-v1,TL-WDR4300,ttyS0,115200,0x36000001,1,8Mlzma))
> > > $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4300V1,tl-wdr4300-v1,TL-WDR4300,ttyS0,115200,0x43000001,1,8Mlzma))
> > 
> > So if I got it right, then all I need to change is the TPLINK_HARDWARE_ID
> > from 0x36000001 to 0x43000001, right?
> > 
> > > .. same kernel config should work fine. I'll go update
> > > freebsd-wifi-build tonight once I wrap up with work.
> > 
> > git pull didn't show up anything new.
> > Nevertheless I'm building with the mentioned change right now.
> 
> It's booting :-)
> Next step will be trying to populate an USB-Stick with a
> full base root-fs.
> Will take some time because of this UFS-byteorder thing
> If anyone has a tip to do using an ARM or i386.
> Last time I did a NFS-root carambola 2 and copy'ed from
> NFS to local stick using this board.

Maybe I don't need anything special.
newfs and tar are there.
Guess it's easiest to use the now running system and extract a tar
from raw USB stick onto the target stick.

-- 
B.Walter <bernd at bwct.de> http://www.bwct.de
Modbus/TCP Ethernet I/O Baugruppen, ARM basierte FreeBSD Rechner uvm.