mt7620 works!

[Willem Jan Withagen]

On 25-12-2015 19:40, Stanislav Galabov wrote:
> 
>> On 25.12.2015 г., at 16:41, Willem Jan Withagen <wjw at digiware.nl> wrote:
>>
>>> On 24-12-2015 15:45, Stanislav Galabov wrote:
>>>
>>>> Hi Stanislave,
>>>>
>>>> Most likely you have them already, but ...
>>>> If of any use, the documentation of the WiTiBoard is in:
>>>>    http://ftp.mqmaker.com/WiTi/
>>>> Which also includes the hardware and software docs of the MT7621, 7612,7602
>>>>
>>>> --WjW
>>>
>>> I had seen these, but thanks for sharing with the list :-)
>>
>> Hi,
>>
>> syslog: freetest tftpd[12135]: 10.10.10.123: read request for //test.bin: success
>>
>>         #################################################################
>>         #################################################################
>>         #################################################
>> done
>> Bytes transferred = 5575489 (551341 hex)
>> NetBootFileXferSize= 00551341
>> Automatic boot of image at addr 0x80A00000 ...
>> ## Booting image at 80a00000 ...
>> Bad Magic Number,7F454C46
>>
>>
>>
>> Just build a new kernel, but that is obvious not enough for booting...
>> I used your uboot.kernel which I expect it to be different from just
>> /boot/kernel/kernel??
>>
>> So how do I get something I can boot from uboot?
>>
>> --WjW
> 
> Hi Willem,
> 
> A good explanation on how to build u-boot suitable kernel image can be found here:
> https://wiki.freebsd.org/FreeBSD/mips/RT3052F
> 
> But if you're trying to build a kernel for the WiTi board (MT7621) you won't be able to as the MT7621 bits are still not in -head.
> 
> The last commits by Adrian only support RT305x and introduce support for RT5350 (basic support) and MT7620. The MT7620 is substantially different than the MT7621, so it's not a straightforward thing to make it work (UART is different for one).
> 
> I'll continue working on Mediatek/Ralink support in the new year, so hopefully things are going to get easier then.

Sort of informative, but the page refers to 'oldlzma'.
Which I suspect is needed otherwise Uboot starts complaining about
during decompressing and aborts.

We're the bits for MT7620 in the patch you pasted?

--WjW