I (think) the AR8327 switch support now works

[Adrian Chadd]

On 1 March 2014 11:05, Milan Obuch <freebsd-mips at dino.sk> wrote:
> On Sat, 1 Mar 2014 09:07:42 -0800
> Adrian Chadd <adrian at freebsd.org> wrote:
>
>> Yeah, USB still doesn't work. I don't know why that is. :(
>>
>
> Well, I think some initialisation is not done - maybe multiplexed pin
> setup is missing, maybe some gpio is used to activate something,
> unfortunaltelly, no datasheet is available publicly for SoC used :(

Yeah. I have the datasheets and the openwrt source is out there. I'll
see if I can figure it out tonight.

I'm still stalled on the AR8327 forwarding/learning stuff; I could do
with a distraction.

>> Are the flash IDs from Linux? I can commit those easily enough.
>>
>> Thanks,
>>
>
> No, I disassembled my box and then found datasheets for ICs found on
> PCB - that's where I found those IDs. Then I found it looks like
> working, however I could not verify it yet, because I did not reached
> init launch/userland level yet.
>
> With ethernet working, I would be able to do more (rootfs via nfs),
> but this did not happen, yet.

One thing at a time. :-)

Thanks,




-a