Cisco 2511 Access Server + FreeBSD 5.4-STABLE

[Hugh Blandford]

Hi James,

have you tried using

ttyd0   "/usr/libexec/getty 3wire.115200"       dialup  on secure

on the cisco we have

line 1 4
 transport input telnet
 speed 115200
 flowcontrol hardware

Regards,

Hugh

James Ryan wrote:

> Hello all,
>
> I apologize if this is trivial, but I am having some issues getting a 
> Cisco 2511 Access Server to talk to a FreeBSD 5.4-STABLE machine 
> connected from com1 to the async line #1 on the Cisco box via RJ-45 to 
> DB9 serial adapter.
>
> I have enabled getty on ttyd0; here is the line from ttys:
> % cat /etc/ttys | grep ttyd0
> ttyd0   "/usr/libexec/getty std.9600"   vt100   on secure
>
>
> I also know that getty is listening on ttyd0:
> % ps -ax | grep ttyd0
> 30951  d0  Is+    0:00.00 /usr/libexec/getty std.9600 ttyd0
>
>
> When I telnet to the IP address of the Ethernet interface on the Cisco 
> box, it simply hangs upon connect.  I am guessing this means there is 
> no communication between the 2511 and my FreeBSD machine.  This 
> happens when I telnet from both the Cisco machine and any other box on 
> the network.
>
> % telnet 192.168.2.10 2001
> Trying 192.168.2.10...
> Connected to 192.168.2.10.
> Escape character is '^]'.
>
>
> Here is a copy of my cisco config:
>
> sterm1#show running-config
> Building configuration...
>
> Current configuration : 734 bytes
> !
> version 12.1
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname sterm1
> !
> enable secret 5 $1$aDXI$a60Yn9vChs6U10vGhQn0Q/
> enable password xxxx
> !
> !
> !
> !
> !
> ip subnet-zero
> no ip finger
> ip host port1 2001 192.168.2.10
> !
> !
> !
> !
> interface Ethernet0
>  ip address 192.168.2.10 255.255.255.0
> !
> interface Serial0
>  no ip address
>  shutdown
> !
> interface Serial1
>  no ip address
>  shutdown
> !
> router igrp 1
>  redistribute connected
>  network 192.168.2.0
> !
> ip classless
> ip http server
> !
> dialer-list 1 protocol ip permit
> dialer-list 1 protocol ipx permit
> !
> line con 0
>  transport input none
> line 1 16
>  no exec
>  transport input telnet
>  stopbits 1
> line aux 0
> line vty 0 4
>  password xxxx
>  login
> !
> end
>
>
> I know this is a mess of information, but any advice anyone has with 
> this would be GREATLY appreciated; I am about to pull my hair out.
>
> Cheers,
>
> James
> _______________________________________________
> freebsd-isp at freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-isp
> To unsubscribe, send any mail to "freebsd-isp-unsubscribe at freebsd.org"


-- 

Hugh Blandford
Island Internet
ph 1300 130 428
mb 0412 016 875