No AVM active ISDN controllers found

[Gary Jennejohn]

bvangelov at setcom.de writes:
> Hi,
> 
> I am using a Fritz Card under FreeBSD 6.0. I have already precompiled my
> kernel. During the start of the system I receive:
> 
> Feb  2 14:31:36 fritz kernel: ifpi0: <AVM Fritz!Card PCI> port
> 0xd000-0xd01f mem 0xee000000-0xee00001f irq 17 at device 6.0 on pci0
> 
> and also
> 
> Feb  2 14:31:36 fritz kernel: i4b: ISDN call control device attached
> Feb  2 14:31:36 fritz kernel: i4btrc: 4 ISDN trace device(s) attached
> Feb  2 14:31:36 fritz kernel: i4brbch: 2 raw B channel access device(s)
> attached
> Feb  2 14:31:36 fritz kernel: i4btel: 2 ISDN telephony interface device(s=
> )
> attached
> Feb  2 14:31:36 fritz kernel: i4bctl: ISDN system control port attached
> 
> Also the isdnd is running :
> Feb  2 14:38:56 fritz isdnd[662]: DMN init_controller_state: controller 0
> is AVM Fritz!Card PCI
> 
> And as much I understand the isdn4bsd module recognize my card, but when =
> I
> run :
> /etc/rc.d/avmaic start
> 
> I get :
> No AVM active ISDN controllers found
> 
> Also from the i4bcapimgr I get :
> Feb  2 14:38:06 fritz kernel: i4bcapimgr: No CAPI controllers installed
> 
> 
> Do you know what is exactly wrong ?
> 

You do not have an active card installed. The Fritz!Card PCI is a passive
card.

---
Gary Jennejohn / garyjATjennejohnDOTorg gjATfreebsdDOTorg garyjATdenxDOTde