Trouble getting an AVM A1 running in kernel ppp mode

[Christoph P. Kukulies]

Gary, Hellmuth, looks like Benjamin runs into the same trouble
I had with 5.0-RELEASE and my AVM A1. Another datapoint. 


On Thu, Jun 19, 2003 at 01:37:13PM +0200, Benjamin Walkenhorst wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> I tried to set up kernel ppp as described, but it didn't work apparently. 
> After setting up ppp/sppp, I get an error message like this:
> 
> i4b-L1 timer3_expired: state = F4 Awaiting Signal
> i4b-L1 isic_recover: HSCX B: ISTA = 0x0
> i4b-L1 isic_recover:   ISAC: ISTA = 0x14
> i4b-L1 isic_recover:   ISAC: CISQ = 0x1e
> i4b-L1 isic_recover: HSCX B: IMASK = 0xff
> i4b-L1 isic_recover: HSCX A: IMASK = 0xf8
> i4b-L1 isic_recover:   ISAC: IMASK = 0x2a
> i4b-L2 i4b_T202_timeout: unit 0, N202 = 3
> i4b-L1 isic_ph_data_req: still in state F3!
> i4b-L3 T303_timeout: SETUP not answered, cr = 24
> i4b-L3 next_l3state: FSM illegal state, state = ST_OW - Out Wait EST, event = 
> EV_T303EXP - T303 timeout!
> i4b-L1 timer3_expired: state = F4 Awaiting Signal
> i4b-L1 isic_recover: HSCX B: ISTA = 0x0
> i4b-L1 isic_recover:   ISAC: ISTA = 0x4
> i4b-L1 isic_recover:   ISAC: CISQ = 0x32
> i4b-L1 isic_recover: HSCX B: IMASK = 0xff
> i4b-L1 isic_recover: HSCX A: IMASK = 0xf8
> i4b-L1 isic_recover:   ISAC: IMASK = 0x2a
> 
> So what am I doing wrong? And, more importantly, how can I get ISDN to run 
> correctly? ISDN is at the moment the main reason I am not switching to 
> FreeBSD as my new primary OS.
> 
> Thanks a lot in advance,
> 
> Benjamin Walkenhorst
> 
> - --
> "Der Hoffnung beraubt sein,                     <<<<<<<<<<<<<<<<<<<<<
>  heißt noch nicht - verzweifeln."               <<<<<<<<<<<<<<<<<<<<<
> (Albert Camus)                                  <<<<<<<<<<<<<<<<<<<<<

The loss of hope doesn't mean already to have to desparate.

This applies here totally :-)


--
Chris Christoph P. U. Kukulies kukulies (at) rwth-aachen.de