ok - 62 Eur bought me back again into isdn under 5.0

[Gary Jennejohn]

"Christoph P. Kukulies" writes:
> http://mozart.physik.rwth-aachen.de/~kuku/messages.gz
> 
> Watch all these timeouts. To me it doesn't tell much at the moment.
> But Hellmuth may know. Or Gary perhaps.
> 

Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_exir_hdlr: EXIRQ Rx Frame Overf
low
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 49
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: ISAC
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: ista = 0x01
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: istad = 0x80
Apr 16 18:19:43 monk kernel: i4b-L1 ifpi2_isacsx_irq: unit 0: Data Overrun error
Apr 16 18:19:43 monk kernel: i4b-L1 avma1pp2_intr: stat 48
Apr 16 18:19:45 monk kernel: i4b-L3 T303_timeout: SETUP not answered, cr = 14


The overflow looks like the culprit to me. This is most probably the
cause of the SETUP error which appears to lead to all the other problems.

This could be due to your having too much trace turned on, such that
all the kernel printf's are screwing up the timing.

I haven't used the Fritz 2 under -current yet (I've used a Fritz 1 OK)
because I can't find my card.

I know the Fritz 1 works. Want to swap? Then I could debug the Fritz 2
driver.

---
Gary Jennejohn / garyj at jennejohn.org gj at freebsd.org gj at denx.de