i386/119303: SATA HDD missing in 7.0-RC1, ok in 7.0-BETA4; ata issue?

Thu Jan 3 07:30:03 PST 2008

>Number:         119303
>Category:       i386
>Synopsis:       SATA HDD missing in 7.0-RC1, ok in 7.0-BETA4; ata issue?
>Confidential:   no
>Severity:       critical
>Priority:       medium
>Responsible:    freebsd-i386
>State:          open
>Quarter:        
>Keywords:       
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   current-users
>Arrival-Date:   Thu Jan 03 15:30:02 UTC 2008
>Closed-Date:
>Last-Modified:
>Originator:     Richard Bejtlich
>Release:        7.0-RC1
>Organization:
TaoSecurity
>Environment:
FreeBSD  7.0-RC1 FreeBSD 7.0-RC1 #0: Mon Dec 24 12:18:24 UTC 2007     root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC  i386
>Description:
FreeBSD 7.0-RC1 doesn't detect the hard drive installed in a Dell PowerEdge 750.  FreeBSD 7.0-BETA4 does.  This is dmesg from 7.0-BETA4 which detects the HDD properly.

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.0-BETA4 #0: Sun Dec  2 19:19:04 UTC 2007
    root at logan.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz (3200.13-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf34  Stepping = 4
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x441d<SSE3,RSVD2,MON,DS_CPL,CNXT-ID,xTPR>
  Logical CPUs per core: 2
real memory  = 1073479680 (1023 MB)
avail memory = 1036886016 (988 MB)
ACPI APIC Table: <DELL   PE750   >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic1: Changing APIC ID to 3
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <DELL PE750> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
cpu1: <ACPI CPU> on acpi0
p4tcc1: <CPU Frequency Thermal Control> on cpu1
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 3.0 on pci0
pci1: <ACPI PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xece0-0xecff mem 0xfe3e0000-0xfe3fffff irq 18 at device 1.0 on pci1
em0: Ethernet address: 00:11:43:cd:4d:04
em0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
em1: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xdcc0-0xdcff mem 0xfe1e0000-0xfe1fffff,0xfe1c0000-0xfe1dffff irq 24 at device 1.0 on pci2
em1: Ethernet address: 00:07:e9:19:f0:e1
em1: [FILTER]
uhci0: <UHCI (generic) USB controller> port 0xbce0-0xbcff irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
uhci0: [ITHREAD]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0xbcc0-0xbcdf irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
uhci1: [ITHREAD]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <base peripheral> at device 29.4 (no driver attached)
ehci0: <Intel 6300ESB USB 2.0 controller> mem 0xfe500000-0xfe5003ff irq 23 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb2: EHCI version 1.0
usb2: companion controllers, 2 ports each: usb0 usb1
usb2: <Intel 6300ESB USB 2.0 controller> on ehci0
usb2: USB revision 2.0
uhub2: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb2
uhub2: 4 ports with 4 removable, self powered
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib3
em2: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xccc0-0xccff mem 0xfdee0000-0xfdefffff irq 21 at device 2.0 on pci3
em2: Ethernet address: 00:11:43:cd:4d:05
em2: [FILTER]
em3: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xcc80-0xccbf mem 0xfdec0000-0xfdedffff,0xfde80000-0xfdebffff irq 22 at device 3.0 on pci3
em3: Ethernet address: 00:11:25:a5:1c:78
em3: [FILTER]
em4: <Intel(R) PRO/1000 Network Connection Version - 6.7.3> port 0xcc40-0xcc7f mem 0xfde60000-0xfde7ffff,0xfde00000-0xfde3ffff irq 21 at device 3.1 on pci3
em4: Ethernet address: 00:11:25:a5:1c:79
em4: [FILTER]
vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem 0xfc000000-0xfcffffff,0xfde5f000-0xfde5ffff at device 14.0 on pci3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel 6300ESB SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfea0-0xfeaf at device 31.2 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio0: [FILTER]
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcb7ff,0xec000-0xeffff pnpid ORM0000 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
ad2: 38146MB <Seagate ST340014AS 8.05> at ata1-master SATA150
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad2s1a
em0: link state changed to UP

>How-To-Repeat:
Try to install 7.0-RC1.  It will not detect the HDD.

Originally submitted to freebsd-current as

http://unix.derkeiler.com/Mailing-Lists/FreeBSD/current/2008-01/msg00029.html
>Fix:
I suspect changes to ata-chipset.c between 7.0-BETA4 and 7.0-RC1 may be the culprit but I do not have the technical knowledge to be sure.

ata-chipset.c
Revision 1.202.2.5
Sun Dec 9 19:26:56 2007 UTC (3 weeks, 3 days ago) by delphij

Changes since revision 1.202.2.4: +131 -41 lines

Sync up ata(4) work by sos@ on -HEAD:

 * Add preliminary SATA ATAPI support for sii 3132/3124 chips.
 * Fix speed report on Intel SATA chips in compat mode.
 * Fix broken detect of JMicron 368.

Related revisions:
 - ata-chipset.c: 1.208, 1.210
 - ata-disk.c.c:  1.205

Approved by:	re (kensmith), sos

http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/dev/ata/?sortby=date;only_with_tag=RELENG_7_0#dirlist

Thank you for looking at this!

>Release-Note:
>Audit-Trail:
>Unformatted: