MacBook users: possible fix for the SMP problem
Maxim Sobolev
sobomax at FreeBSD.org
Mon Nov 5 15:38:12 PST 2007
I've just tested it on my 1st gen MacBook Pro. Yes, indeed, it solves
both problems - one with CPU frequency detection and another one with
the AP startup. Thanks!
-Maxim
Rui Paulo wrote:
> Hi,
> I've been contacted by Marco Trillo and I think he has found the
> source of the SMP problem.
> The problem seems to rely on Intel ICH7. Basically we need to disable
> the "LEGACY_USB" bit before we calibrate the clocks.
> "LEGACY_USB", according to Marco (I don't have the ICH7 spec at hand),
> "causes legacy USB circuit to generate SMIs".
>
> Please try the following patch:
> --- sys/amd64/isa/clock.c.orig 2007-11-04 20:31:09.000000000 +0000
> +++ sys/amd64/isa/clock.c 2007-11-04 20:34:59.000000000 +0000
> @@ -577,6 +577,8 @@ startrtclock()
> writertc(RTC_STATUSA, rtc_statusa);
> writertc(RTC_STATUSB, RTCSB_24HR);
>
> + outl(0x430, inl(0x430) & ~0x8);
> +
> freq = calibrate_clocks();
> #ifdef CLK_CALIBRATION_LOOP
> if (bootverbose) {
> --- sys/i386/isa/clock.c.orig 2007-11-04 20:34:03.000000000 +0000
> +++ sys/i386/isa/clock.c 2007-11-04 20:34:30.000000000 +0000
> @@ -621,6 +621,8 @@ startrtclock()
> writertc(RTC_STATUSA, rtc_statusa);
> writertc(RTC_STATUSB, RTCSB_24HR);
>
> + outl(0x430, inl(0x430) & ~0x8);
> +
> freq = calibrate_clocks();
> #ifdef CLK_CALIBRATION_LOOP
> if (bootverbose) {
>
>
> This should probably fix two issues:
> 1) The second core should start without any trick (e.g. key press)
> 2) We should be able to run with HZ=1000 (the default) without any
> problem. To check if this is indeed the case, try booting with HZ=1000
> (loader.conf variable kern.hz) and check if your CPU clock shows up
> correctly in the dmesg. After that, please also check if 'time sleep
> 1' takes one second (not more and not less).
>
> Also, please test if there are any USB problems.
>
> Note: this is still a hack. I'm still thinking about a way to
> correctly identify on which systems we need to apply this fix.
>
> Regards.
>
More information about the freebsd-i386
mailing list