i386/79729: umass, da0 not detected by devfs for
Łukasz Olszewski
lukasz.olszewski at polkomtel.com.pl
Wed Apr 20 04:10:12 PDT 2005
The following reply was made to PR i386/79729; it has been noted by GNATS.
From: =?iso-8859-2?Q?=A3ukasz_Olszewski?= <lukasz.olszewski at polkomtel.com.pl>
To: <bug-followup at FreeBSD.org>, <metrojunky at yahoo.com>
Cc:
Subject: Re: i386/79729: umass, da0 not detected by devfs for
Date: Wed, 20 Apr 2005 13:02:00 +0200
Hi=20
I have the same problem with supporting USB pen drives. Actually I have =
two pen drives, one of them (Kingston DataTravel USB2.0 1GB) cannot be =
used with the FreeBSD station. When I plug in the disk the following =
messages are displayed:
umass0: Kingston DataTraveler2.0, rev 2.00/2.00, addr 2
No "da" devices is created
powerbsd# ls -la /dev/da*
ls: No match.
When I plug in the second pen drive a "da" device is created and it is =
possible to mount the disk.
umass0: LEXR PLUG DRIVE LEXR PLUG DRIVE, rev 1.10/0.01, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR DIGITAL FILM /W1.> Removable Direct Access SCSI-2 device=20
da0: 1.000MB/s transfers
da0: 61MB (125952 512 byte sectors: 64H 32S/T 61C)
The Kingston Pen Drive for sure works fine. I can use it with WinXP and =
Linux stations.
The problem also exist with GENERIC kernel.
My dmesg:
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.3-RELEASE-p5 #0: Wed Mar 16 13:59:47 UTC 2005
root at powerbsd:/src/src/sys/i386/compile/CUSTOM
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2791.01-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf29 Stepping =3D 9
=
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 1073172480 (1023 MB)
avail memory =3D 1040629760 (992 MB)
ACPI APIC Table: <DELL WS 650 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic2: Changing APIC ID to 10
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 24-47 on motherboard
ioapic2 <Version 2.0> irqs 48-71 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL WS 650 > on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel Generic host to PCI bridge> mem 0xe8000000-0xefffffff at =
device 0.0 on pci0
pcib1: <PCI-PCI bridge> mem 0xe0000000-0xe7ffffff at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <base peripheral, interrupt controller> at device 28.0 (no driver =
attached)
pcib3: <ACPI PCI-PCI bridge> at device 29.0 on pci2
pci3: <ACPI PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.35> port =
0xecc0-0xecff mem 0xfe7e0000-0xfe7fffff irq 24 at device 14.0 on pci3
em0: Ethernet address: 00:0b:db:4b:33:c2
em0: Speed:N/A Duplex:N/A
pci2: <base peripheral, interrupt controller> at device 30.0 (no driver =
attached)
pcib4: <ACPI PCI-PCI bridge> at device 31.0 on pci2
pci4: <ACPI PCI bus> on pcib4
mpt0: <LSILogic 1030 Ultra4 Adapter> port 0xdc00-0xdcff mem =
0xfe5e0000-0xfe5effff,0xfe5f0000-0xfe5fffff irq 50 at device 14.0 on =
pci4
mpt0: [GIANT-LOCKED]
uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xff80-0xff9f =
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xff60-0xff7f =
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ums0: Logitech USB Receiver, rev 1.10/25.00, addr 2, iclass 3/1
ums0: 7 buttons and Z dir.
uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xff40-0xff5f =
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci5: <ACPI PCI bus> on pcib5
fwohci0: <Texas Instruments TSB43AB22/A> mem =
0xfe1f8000-0xfe1fbfff,0xfe1ff800-0xfe1fffff irq 20 at device 12.0 on =
pci5
fwohci0: OHCI version 1.10 (ROM=3D0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 85:ff:ff:ff:ff:ff:ff:00
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 86:ff:ff:ff:ff:00
fwe0: Ethernet address: 86:ff:ff:ff:ff:00
fwe0: if_start running deferred for Giant
fwohci0: Initiate bus reset
fwohci0: node_id=3D0xc800ffc0, gen=3D1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <=3D 0, cable IRM =3D 0 (me)
firewire0: bus manager 0 (me)
de0: <Digital 21140A Fast Ethernet> port 0xcc80-0xccff mem =
0xfe1ff400-0xfe1ff47f irq 22 at device 14.0 on pci5
de0: [GIANT-LOCKED]
de0: 21140A [10-100Mb/s] pass 2.2
de0: Ethernet address: 00:c0:f0:17:54:1a
de0: if_start running deferred for Giant
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH4 UDMA100 controller> port =
0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pcm0: <Intel ICH4 (82801DB)> port 0xbc40-0xbc7f,0xb800-0xb8ff mem =
0xfe900000-0xfe9000ff,0xfe900400-0xfe9005ff irq 17 at device 31.5 on =
pci0
pcm0: [GIANT-LOCKED]
pcm0: <Analog Devices AD1981B AC97 Codec>
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on =
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on =
acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0: <ECP parallel printer port> port 0x778-0x77f,0x378-0x37f irq 7 on =
acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
orm0: <ISA Option ROMs> at iomem =
0xe1800-0xe3fff,0xe0000-0xe17ff,0xcf800-0xcffff,0xc0000-0xcf7ff on isa0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
Timecounters tick every 10.000 msec
ad0: 76293MB <ST380011A/3.16> [155009/16/63] at ata0-master UDMA100
ad1: 76293MB <ST380011A/3.16> [155009/16/63] at ata0-slave UDMA100
acd0: CDROM <CRD-8482B/1.05> at ata1-master UDMA33
Waiting 15 seconds for SCSI devices to settle
de0: enabling 10baseT port
sa0 at mpt0 bus 0 target 6 lun 0
sa0: <ARCHIVE Python 06240-XXX 8240> Removable Sequential Access SCSI-3 =
device=20
sa0: 80.000MB/s transfers (40.000MHz, offset 32, 16bit)
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/ad0s1a
em0: Link is up 100 Mbps Full Duplex
umass0: Kingston DataTraveler2.0, rev 2.00/2.00, addr 2
umass0: at uhub2 port 1 (addr 2) disconnected
umass0: detached
umass0: LEXR PLUG DRIVE LEXR PLUG DRIVE, rev 1.10/0.01, addr 2
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <LEXAR DIGITAL FILM /W1.> Removable Direct Access SCSI-2 device=20
da0: 1.000MB/s transfers
da0: 61MB (125952 512 byte sectors: 64H 32S/T 61C)
Kldstat -v
Id Refs Address Size Name
1 9 0xc0400000 3aeea4 kernel
Contains modules:
Id Name
17 xpt
18 probe
19 cam
20 cd
21 ch
22 da
23 pass
24 sa
25 ses
26 isa/ata
27 pci/atapci
28 atapci/ata
29 acd
30 pci/em
31 fwohci/firewire
32 pci/fwohci
33 cardbus/fwohci
34 firewire/fwe
35 firewire/sbp
36 g_md
37 mem
38 miibus/amphy
39 miibus/bmtphy
40 miibus/brgphy
41 miibus/ciphy
42 miibus/dcphy
43 miibus/e1000phy
44 miibus/xlphy
45 miibus/inphy
46 miibus/mlphy
47 miibus/nsphy
48 miibus/nsgphy
49 miibus/pnphy
50 miibus/pnaphy
51 miibus/rgephy
52 miibus/rlphy
53 miibus/ruephy
54 miibus/tdkphy
55 miibus/tlphy
56 miibus/ukphy
57 miibus/xmphy
58 miibus/lxtphy
59 miibus/qsphy
60 miibus/acphy
61 pci/mpt
62 null
63 pci/fixup_pci
64 pci/ignore_pci
65 pci/isab
66 pcib/pci
67 pci/pcib
68 ppbus/plip
69 ppbus/lpt
70 ppc/ppbus
71 ppbus/ppi
72 random
73 pci/sio
74 cardbus/sio
75 pci/ohci
76 cardbus/ohci
77 uhub/ugen
78 pci/uhci
79 cardbus/uhci
80 uhub/uhid
81 usb/uhub
82 uhub/uhub
83 uhub/ukbd
84 uhub/ulpt
85 uhub/umass
86 uhub/ums
87 ohci/usb
88 uhci/usb
89 ehci/usb
90 watchdog
91 devfs
92 msdosfs
93 procfs
94 pseudofs
95 g_dev
96 g_disk
97 g_gpt
98 isab/isa
99 eisab/isa
100 legacy/isa
101 isa/isahint
102 isa/orm
103 isa/pnp
104 cd9660
105 elf32
106 shell
107 rootbus
108 msgsys
109 msgctl
110 msgget
111 msgsnd
112 msgrcv
113 sysvmsg
114 semsys
115 __semctl
116 semget
117 semop
118 sysvsem
119 shmsys
120 shmat
121 shmctl
122 shmdt
123 shmget
124 sysvshm
125 ether
126 if_faith
127 if_gif
128 loop
129 if_ppp
130 if_sl
131 if_tun
132 nfs
133 nfs4
134 nfsserver
135 pci/de
136 ufs
137 g_class
138 g_fd
139 fdc/fd
140 acpi/fdc
141 isa/fdc
142 io
143 isa/ppc
144 acpi/ppc
145 isa/sio
146 acpi/sio
147 scterm-sc
148 scrndr-vga
149 g_bsd
150 g_mbr
151 g_mbrext
152 isa/pnpbios
153 nexus/legacy
154 legacy/cpu
155 pci/piix
156 legacy/mptable_pcib
157 pci/mptable_pcib
158 root/nexus
159 isa/sysresource
160 isa/atpic
161 acpi/atpic
162 isa/attimer
163 acpi/attimer
164 isa/atdma
165 acpi/atdma
166 nexus/npx
167 isa/npxisa
168 acpi/npxisa
169 isa/pmtimer
170 legacy/pcib
171 pci/hostb
172 isa/pcibus_pnp
173 pci/pcibios_pcib
174 legacy/pir
175 atkbdc/atkbd
176 isa/atkbdc
177 acpi/atkbdc
178 atkbdc/psm
179 isa/psmcpnp
180 acpi/psmcpnp
181 isa/sc
182 isa/vga
183 pci/agp_ali
184 pci/agp_amd
185 pci/agp_amd64
186 pci/agp_i810
187 pci/agp_intel
188 pci/agp_nvidia
189 pci/agp_sis
190 pci/agp_via
2 1 0xc07af000 5844 snd_ich.ko
Contains modules:
Id Name
2 pci/snd_ich
3 2 0xc07b5000 1d4fc sound.ko
Contains modules:
Id Name
1 sound
4 14 0xc07d3000 537f0 acpi.ko
Contains modules:
Id Name
3 nexus/acpi
4 acpi/acpi_button
5 acpi/acpi_isab
6 pcib/acpi_pci
7 acpi/acpi_pcib
8 pci/acpi_pcib
9 acpi/acpi_sysresource
10 acpi/acpi_timer
11 acpi/acpi_tz
12 acpi/acpi_acad
13 acpi/acpi_cmbat
14 acpi/cpu
15 acpi/acpi_ec
16 acpi/acpi_lid
5 1 0xc2b07000 17000 linux.ko
Contains modules:
Id Name
191 linuxelf
192 linuxaout
Regards
=A3ukasz Olszewski
mobile : (+48) 601-131-003
kapsch : (0-22) 426-1357
* : lukasz.olszewski at polkomtel.com.pl
More information about the freebsd-i386
mailing list